• 전기화학회지
• /
• 제22권1호
• /
• pp.1-12
• /
• 2019

암모니아 생산은 이전부터 비료, 식량과 관련되어 많은 연구가 이루어져 왔는데, 최근 신재생 에너지에 대한 관심이 커짐에 따라 암모니아 또한 에너지로서 내연기관이나 연료전지로 활용이 기대되어 더 많은 연구가 활발히 이루어 지고 있다. 하지만 암모니아를 생성하기 위해서 하버-보쉬법을 사용하는데, 150-300기압과 $350-550^{\circ}C$ 이상의 높은 압력과 온도가 필요하므로 지구 에너지의 1-2%를 사용할 만큼 암모니아 생산에 많은 에너지가 소모되며, 주로 화석연료가 사용된다. 위와 같은 반응에 사용되는 에너지를 줄임으로 이산화탄소 배출량을 줄여 환경문제에도 대응할 수 있기 때문에 반응온도 및 압력을 줄이는 노력이 필요하다. 본 총설에서는 암모니아를 생산하기 위한 방법 중 특히 상온, 상압에서의 전기화학적 질소환원반응 결과들을 소개한다. 실험 결과뿐만 아니라 밀도범함수 계산을 통하여 전기화학적 질소환원반응 메커니즘 연구가 많이 되었으며, 더 많이 전기화학반응에 참여할 수 있도록 하는, 나노 와이어, 다공성 전극과 같은 나노구조화 전극설계에 대한 다양한 연구 결과들 또한 제시한다.

• 전자통신동향분석
• /
• 제36권3호
• /
• pp.53-64
• /
• 2021

As the 5G service market is expected to grow rapidly, the development of high-power, high-efficiency power amplifiers for the 5G communication infrastructure is indispensable. Gallium nitride (GaN) is attracting great interest as a key device in power devices and integrated circuits due to its wide bandgap, high carrier concentration, high electron mobility, and high-power saturation characteristics. In this study, we investigate the technology trends of Ka-band GaN radio frequency (RF) power devices and integrated circuits for operation in the millimeter-wave band of recent 5G mobile communication services. We review the characteristics of GaN RF high electron mobility transistor (HEMT) devices to implement power amplifiers operating at frequencies around 28 GHz and compare the technology of foreign companies with the device characteristics currently developed by the Electronics and Telecommunication Research Institute (ETRI). In addition, the characteristics of Ka-band GaN monolithic microwave integrated circuit (MMIC) power amplifiers manufactured using various GaN HEMT device technologies are reviewed by comparing characteristics such as frequency band, output power, and output power density of integrated circuits. In addition, by comparing the performance of the power amplifier developed by ETRI, the current status and future direction of domestic GaN power devices and integrated circuit technology will be discussed.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.129-138
• /
• 2023

The proportion of agricultural products handled through the Agricultural Products Processing Center (APC) is also steadily increasing every year, and in the case of Seongju Korean melon, a total of 10 APCs of Nonghyup and farming association corporations are in operation, and the distribution ratio is about 60% based on total production. In this study, Seongju Korean melon was selected as a target to analyze the environment load during carrying (production farm ~ APC) in the production area and the transport environment load during distribution of domestic fruits, and to analyze the environmental load for handling at APC. The vertical average vibration intensity (overall G_rms of 1~250 Hz) of truck transport measured at three transport routes from Seongju Korean melon producer ~ APC, Seongju ~ Seoul and Seongju ~ Jeju was about three times larger than that in the lateral direction and 4.5 times larger than that in the longitudinal direction, respectively. The frequency of occurrence of high-amplitude events (G) in the vertical direction compared to the measuring time was deeply related to pavement conditions in the order of unpaved farm-roads, concretepaved farm-roads, and asphalt-paved main-roads, but overall G_rms for the entire frequency band is believed to have a greater impact on vehicle traveling speed than road conditions. On the other hand, the difference in the size and direction of the vibration intensity measured by the forklift truck's main-body and the attachment (fork carrier) during handling at Seongju Korean melon APC was clear, and the vibration intensity of the forklift truck's main-body was largely affected by the stiffness of the fork and the mast according to the handling weight. Based on the field-data of the transport environment during domestic distribution measured through this study, it is believed that it is possible to develop a lab-based simulation protocol for appropriate packaging design.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.83-83
• /
• 2003

The stochiometric mix of evaporating materials for the CuInSe$_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CuInSe$_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were 62$0^{\circ}C$ and 41$0^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of CuInSe$_2$ single crystal thin films measured from Hall effect by van der Pauw method are 9.62$\times$10$^{16}$ cm$^{-3}$ , 296 $\textrm{cm}^2$/V.s at 293 K, respectively From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the CuInSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting ΔSo and the crystal field splitting ΔCr were 6.1 meV and 175.2 meV at 10 K, respectively. From the photoluminescence measurement on CuInSe$_2$ single crystal thin film, we observed free excition (Ex) existing only high quality crystal and neutral bound exiciton (D$^{\circ}$,X) having very strong peak intensity. Then, the full-width-at -half-maximum(FWHM) and binding energy of neutral donor bound excition were 7 meV and 5.9 meV, respectivity. By Haynes rule, an activation energy of impurity was 59 meV.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.581-586
• /
• 2023

As the development of alternative energy is required due to the depletion of fossil fuels, interest in the use of hydrogen energy is increasing. Hydrogen is a promising clean energy source with high energy density and can lead to the application of environmentally friendly technologies. However, due to difficulties in production, storage, and transportation that prevent the application of hydrogen-based eco-friendly technology, research on reforming reactions using dimethyl ether (DME) is being conducted. Unlike other hydrocarbons, DME is attracting attention as a hydrogen carrier because it has excellent storage stability and transportability, and there is no C-C bond in the molecule. The reaction between DME and steam is one of the reforming processes with the highest hydrogen yield in theory at a temperature lower than that of other hydrocarbons. In this study, a hydrogen reforming device using DME was developed and a catalyst prepared by supporting Cu in alumina was put into a reactor to find optimal hydrogen production conditions for supplying hydrogen to fuel cells while changing reaction temperature (300-500℃), pressure (5-10 bar), and steam/carbon ratio (3:1 to 5:1).

• Journal of Ceramic Processing Research
• /
• 제22권2호
• /
• pp.192-199
• /
• 2021

Peony flower-like γ-Ga₂O₃ nanosheets (γ-Ga₂O₃ NSs) were synthesized and carbon layers were coated on their surfaces using a simple hydrothermal process with subsequent carbonization. The γ-Ga₂O₃ NSs comprised ultrathin layers, which are tens of nanometers in thickness. The carbon-coated γ-Ga₂O₃ NS (γ-Ga₂O₃@C NS) electrode exhibited a specific capacity of 598 mAh g^-1 at 200 cycles, at a current density of 0.5 A g^-1, higher than that of γ-Ga₂O₃ NSs (60 mAh g^-1). Furthermore, a specific capacity of 100 mAh g^-1 at 5 A g^-1 was achieved owing to the low charge transfer resistance through the carbon layers. This study suggests that two-dimensional γ-Ga₂O₃@C NSs with both large specific area and high charge carrier transport are promising active materials for lithium-ion battery anodes with better electrochemical performance.

• 한국재료학회지
• /
• 제3권6호
• /
• pp.614-623
• /
• 1993

높은 알칼리량을 함유하는 LiF-$Li_{2}O-B_{2}O_{3}-P_{2}O_5$계 유리의 전기적 특성을 분석하였다. $Li_{+}$ 이온은 모두 전기전도에 기여하지 않으나 조성에 따른 전기전도도의 변동은 약전해질 모델을 따르지 않았다. 또한 이동이온의 농도를 구하는데 사용되는 승법칙(power law)의 적용이 가능하지 않았다. 이들 계에서 조성에 따른 전기전도도의 변동은 유리내에서의 이동 가능한 $Li^{+}$이온의 농도변화만으로 또는 이동도의 변화만으로는 설명할 수 없었다. 전도도의 향상은 $(B-O-P)^{o}$ 보다 $Li^{+}$이온의 확산에 부가적인 자리를 제공하는$(B-O-P)^-,di^-$, 및 metaborate가 형성된 것과 관련이 있었다. 전기전도성이 가장 좋은 조성의 $150^{\circ}C$에서의 전기전도도는 $2.43 \times 10^{-4}$S/cm였고 분해포텐샬은 5.94V, emf는 3.14V였고 에너지 밀도는 22Wh/Kg이었다.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.252-259
• /
• 2005

[ $CuGaSe_2$ ] 단결정 박막은 수평 전기로에서 합성한 $CuGaSe_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성 GaAs(100))의 온도를 각각 $610^{\circ}C,\;450^{\circ}C$로 고정하여 단결정 박막을 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼(PL)과 이중결정 X-선 요동곡선 (DCRC)으로부터 구하였다. Hall 효과는 Van der Pauw 방법에 의해 측정되었으며, 293 K에서 운반자 농도와 이동도는 각각 $4.87{\times}10^{17}/cm^3,\;129cm^2/V{\cdot}s$였다. $n-Cds/p-CuGaSe_2$ 합 태양전지에 $80mW/cm^2$의 광을 조사시켜 최대 출력점에서 전압은 0.41 V, 전류밀도는 $21.8mA/cm^2$였고, fill factor는 0.75 그리고 태양전지 전력변환 효율은 11.17% 였다.

• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.83-91
• /
• 1994

직경 2인치 갈륨비소 단결정을 위한 수직온도구배냉각 결정성장치를 제작하여 크롬과 인듐이 함께 도핑된 반절연 갈륨비소 단결정을 성장하였다. 함께 도핑된 결정에 대해서,불순물의 편석계수는 크롬 또는 인듐만을 도핑한 결정에서 편석계수와 비교할 때 변하지 않고 같은 값을 갖는다. 크롬과 인듐의 농도는 결정의 종자부분 부터 꼬리부분까지 각각 $2{\Times}10^{16}~3{\Times}10^{17} cm^{-3}$과 $2{\Times}10^{19}~3{\Times}10^{20} cm^{-3}$의 범위내에서 분포되었다. 평균 전위밀도는 결정의 전 영역에 걸쳐 약 $8000cm^{-2}$ 미만으로 관측되었다. 또한 인듐농도가 증가함에 따라 전위 밀도가 $1000m^{-2}$ 미만으로 감소하는 격자강화의 효과도 관찰할 수 있었다. 갈륨비소의 결정성장 방향에 따라 캐리어의 농도는 $10^{16}$에서 $10^8cm^{-3}$로 감소한 반면 비저항 값은 $10^{-2}$에서 $10^8$ Ohm-cm로 급격하게 증가하였다. 반절연의 특성은 크롬농도 약 $6{\Times}10^{16}cm^{-3}$의 농도이상에서 얻을 수 있었다. 성장된 단결정 내의 깊은 준위는 두 개의 전자덫인 $E_C-0.81eV, E_C-0.35eV$와 두 개의 정공덫인$E_V+0.89eV, E_V+0.65eV$이다.

• Journal of Yeungnam Medical Science
• /
• 제3권1호
• /
• pp.41-48
• /
• 1986

사람의 적혈구막으로부터 Band 3를 분리정제하고 이를 liposome 내로 도입시켜 그 결과를 관찰하였다. 적혈구를 약알칼리 저장액으로 용혈시켜 막을 분리한 후, 저이온강도 용액으로 처리하여 Band 4를 추출하였다. Triton X-100 추출액에 p-chloromercuribenzoate를 가하고 sucrose density gradient ultracentrifugation후 fractionation하여 Band 3를 정제하였다. phosphatidyl L-serine과 cholesterol을 1 : 1 molar ratio로 섞고 진공회전 증발기를 사용하여 chloroform을 제거한 후 Triton X-100을 제거한 Band 3용액을 가하고 sonication함으로 liposome(reverse-phase evaporation vesicle)을 만들면서 Band 3를 도입 시켰다 Band 3의 분리정제 및 liposome에 도입되었음은 sodium dodecyl sulfate-polyacrylamide gel 전기영 동 후 coomassie brilliant blue 염색으로 확인할 수 있었다.