• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.251-260
• /
• 1998

For the purpose of building the simulation model on cargo handling capacity in container terminal we composed a model of container logistics system which has a 4 subsystem; cargo handling transportation storage and gate complex system. Several data are used in simulation which were gained through a field study and a basic statistic analysis of raw data on BCTOC from January to Jane in 1998. The results of this study are as follows; First average available ratios of each subsystems were 50% for G/C, 57.5% for Y/T, 56% for storage system and 50% for gate complex. And there were no subsystems occurring specific bottleneck. Second comparing the results of simulation to the results of basic statistics analysis we can verifying the suitability of this simulation model. Third comparing the results of this study to the results of existed similar study in 1996, we were able to confirm the changes of container logistics system in BCTOC.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.4
• /
• pp.1-15
• /
• 1990

With increasing ship's speed turnround and port time becomes a large percentage of total roundtrip time and this causes to accelerate the introduction of the various kind of modern handling equipment, the standardization of cargoes, and the improvement of the ship. However, it is still a drag on efficient operation of ship. Similarly, the turnround time at the container port is very important as a measure for the decision of the efficiency of port. To decrease operating coasts, the minimization of the time need to cargo handling at the ports of call must be achieved. Thus the optimization of the time need to cargo handling at the ports of call must be achieved. Thus the optimized Container Loading Plan is necessary, especially under the rapid speed of container operations. For the container loading plan, in this thesis, we use the hungarian method and the branch and bound method to get the initial disposition of both maximization of ship's GM and minimization of shift number to the obstructive container in a yard area. We apply the dynamic programming algorithm to get the final disposition for minimizing total turnroudn time and finally we analyzed the results to check whether the initial disposition is proper or not.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.203-210
• /
• 2011

Incheon Port has been served as not only the center of the Yellow Sea and port for trade with China but also domestic gateway port for the metropolitan area, playing a professional role as the greatest domestic Port which processes a variety of items such as imported raw materials, bulk cargo, oil and gas and so on. This study was conducted based on step by step business process between port entry and departure of ship, and incurred cost according to port industry classification and performance on the port facility. Bulk cargo and general cargo such as grain, food, steel, scrap metal, wood, coal, LNG, LPG and oil etc., which have a vast majority of import goods, have been treated by 57,062 thousand tons and 7,409 thousand tons of container cargo were processed at Incheon Port in 2009. Bulk vessels and carriers moving items such as LPG, LNG and oil recorded 38,836 thousand won and full-container vessels recorded 11,001 thousand won as the amount of notified port facility usage fees in 2008.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1235-1242
• /
• 2015

In global shipping logistics, it is important for users to keep track of the location of their continuously moving cargos. Analyzing the GPS data stream coming from the tag which is attached to the cargo, we are able to keep track of the cargo location in terms of going into or out of a certain logistics area using the information of the spatial relationship change between the tag and the logistics area. In this paper, we propose a simulation system for measuring the precision and false alarm rate of the cargo location tracking algorithm which generates spatial events over the global logistics areas. Due to the difficulty of experiment with a real tag, we developed a tag emulator to create a virtual tag which operates exactly like a real tag. We show the cargo location tracking system works correctly with the tag emulator which communicates with it using the same protocol as the real tag.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.16-25
• /
• 2003

In this paper, the reduction of green house effect gas CO₂ emission and NOx gas emission by using the RORO ship coastal transport of import-export container cargo was investigated. At first, the domestic CO₂ gas emission and the transportation of import-export container cargo were Investigated. Next, the characteristic of a RORO ship and CO₂ emission standard and NOx emission standard were investigated. And also, the reduction of CO₂ emission and NOx emission by the shift of coastal transport from land transport for the transportation of import-export container cargo between Kyongin area and Pusan Port were calculated. Finally, the change of CO2 and NOx gas emission due to the change of the share of coastal transportation and the load efficiency of RORO ship are investigated. The research results show that the shift of RORO ship coastal transport from land transport was very effective to reduce the CO₂ emission but it was no good to reduce the NOx emission.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2007.10a
• /
• pp.161-173
• /
• 2007

This paper considers the problem of determining the cargo flow and the transportation mode in each trade route while satisfying the demand. Especially, the problem incorporates short sea shipping in Korea, which is becoming more important in order to improve efficiency of Logistics. The objective is to minimize the sum of shipping and inland transportation costs. To solve optimally the problem, this paper employs a linear programming model, which is an operations research technique for optimization. The problem is formulated by extending the well-known network design problem by considering capacity at seaport and limitation of total number of vehicles. The model is solved using CPLEX, a commercial linear program software. The test results using a real cargo flow data in Korea show that the model represents closely the real situation.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.39-47
• /
• 2015

The emissions of ozone precursors, NOx and VOCs from a biogenic source and port-related sources (ship, shipping container truck, and cargo handling equipment) were estimated in Busan during 2013. Total biogenic isoprene emission in Busan during 2013 was estimated to be $4,434ton\;yr^{-1}$ with the highest emission (e.g., $28ton\;day^{-1}$) in summer using a BEIS method. Seasonal ozone production rates by isoprene ranged from 0.15 (winter) to 2.08 (summer) $ppb\;hr^{-1}$, contributing the predominant portion to ambient ozone levels. Total emissions of NOx and VOCs from ship traversing Busan ports were estimated to be 29,537 and $814ton\;yr^{-1}$, respectively, showing the significant contribution to total NOx emission in Busan. The emissions of ozone precursors were significantly different depending on ship tonnage and port location. Compared to the ship emission, the emissions of NOx and VOCs from the shipping container trucks in Busan were insignificant (2.9% for NOx and 3.9% for VOCs). Total NOx and VOCs emissions from the cargo handling equipment were estimated to be 1,440 and $133ton\;yr^{-1}$, respectively with the predominance of yard tractors.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.114-122
• /
• 2006

The most important thing in the container terminal is to handle the cargo effectively in a limited time. To achieve this objective, many strategies have been introduced and applied. If we consider the automated container terminal, it is necessary that the cargo handling equipment is equipped with more intelligent control systems. From the middle of the 1990s, an automated rail-mounted gantry crane (RMGC) and rubber-tired gantry crane (RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, equipment like CCD cameras and sensors have been mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes that make the cargo handling be performed effectively in the yards. For this plant, we ought to consider modeling, tracking control, anti-sway system design, skew motion suppressionand complicated motion control and suppressing problems. In this paper, the system modeling and a tracking control approach are discussed, based on a two-degree-of-freedom (2DOF) servo-system design. From the simulation results, the good control performance of the designed control system is evaluated.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.485-488
• /
• 2006

The most important thing in the container terminal is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. In this paper, the system modelling and a tracking control approach are discussed based on two-degree-of-freedom (2DOF) servosystem design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.1
• /
• pp.26-32
• /
• 2007

The most important thing in the container terminal is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. In this paper, the system modelling and a tracking control approach are discussed. And, we design the tracking control system incorporating an observer based on the 2DOF servosystem design approach to obtain the informations of the states. The experiment results show the usefulness of the designed control system.