• 한국가구학회지
• /
• 제18권3호
• /
• pp.205-210
• /
• 2007

Particleboard(PB) is one of the most commonly used wood-based composite materials, which can be prepared by utilizing any kind of low grade wooden materials like waste wood which contains formaldehyde itself. Therefore, PB have been of considerable interest, in issues regarding the formaldehyde emission problems. Wood wastes are carbonized by the carbonization kiln at $800^{\circ}C$. Charcoal has been known as a formaldehyde adsorber. Thus, in this study, we fabricated PBs with carbonized waste particles cores, to examine the possibility of developing less formaldehyde emitting boards. The physical and mechanical properties were evaluated by Korean Standard (KS F 3104). The moisture content of PBs ranged from 6.76 to 8.36%. Internal bond strengths decreased with the increase in the content of carbonized core particles. Formaldehyde emission showed minimum value at 25% of carbonized core particles, but the emission values increased when the amount of carbonized cote particles increased. When 25% of carbonized core particles was used, PBs met KS F 3104 standard properties.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.281-288
• /
• 2016

After analyzing of heating value of four kinds of RDF, the RDF-D has the highest heating value, was chosen to be mixed with carbonized sludge by different ratio. The 85%:15% ratio, which has the highest efficiency, was analyzed with thermogravimetric and pyrolysis kinetics. Applying of Kissinger method, activation energy was obtained from slope which is calculated from relation of ln(${\beta}/T^2{_m}$) and $1/T_m$. The kinetic parameters obtained from Kissinger method were 46.06 kJ/mol of RDF, 55.99 kJ/mol of carbonized sludge and 40.68 kJ/mol of mixture of RDF and carbonized sludge. The mixture of RDF and carbonized sludge has the lowest activation energy and frequency factor, during thermal decomposition reaction it has the slowest reaction rate and needs the lowest energy. Although activation energy with pyrolysis of RDF was irregularly scattered, it showed that activation energy was stabilized by co-pyrolysis of RDF and additives(Carbonized Sludge).

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.486-490
• /
• 2014

This study was conducted to investigate the effect of carbonized biomass from crop residues on soil carbon storage during soybean cultivation. The carbonized biomass was made by field scale mobile pyrolyzer. The treatments consisted of control without input and three levels of carbonized biomass inputs as $59.5kg10a^{-1}$, C-1 ; $119kg10a^{-1}$, C-2 ; $238kg10a^{-1}$, C-3. Soil samples were collected during the 113 days of experimental periods, and analyzed soil pH and moisture contents. Soil carbon contents and soybean yield were measured at harvesting period. For the experimental results, soil pH ranged from 6.8 to 7.5, and then increased with increasing carbonized material input. Soil moisture contents were slightly higher by 0.1~1.5% than the control, but consistent pattern was not observed among the treatments. Soil carbon and organic carbon contents in the treatments increased at 24 and 15% relative to the control at 15 days after sowing, respectively. Loss rate of SOC (soil organic carbon) relative to its initial content was 7.2% in control followed by C-1, 6.8%> C-2, 3.5%>C-3, 1.1% during the experimental periods. The SOC change rate decreased with increasing carbonized biomass rate. It was appeared that soybean yields were $476.9kg10a^{-1}$ in the control, and ranged from 453.6 to $527.3kg10a^{-1}$ in the treatments. However, significant difference was not found among the treatments. It might be considered that the experimental results will be applied to soil carbon sequestration for future study.

• 대한화학회지
• /
• 제61권5호
• /
• pp.238-243
• /
• 2017

본 연구에서, 400도에서 탄화시킨 정수 슬러지를 수중의 납과 카드뮴의 제거를 위한 흡착제로서 시험하였다. 탄화된 슬러지는 열중량 분석, 주사 전자 현미경, X-선 형광분광기, 표면적 분석에 의해 특성화 하였다. 탄화 슬러지는 정수 슬러지 자체보다도 대단히 높은 비표면적과 총 세공부피를 나타내었다. 회분식 흡착 과정에서 탄화 슬러지는 카드뮴보다는 납에 대하여 더 나은 흡착성능을 보였으며, 실험에서 행한 농도에서 90~98%의 흡착 능력을 달성하였다. 흡착의 평형 데이터는 Freundlich와 Langmuir와 흡착등온선 모델을 이용하여 평가하였고, Freundlich와 Langmuir 흡착 등온선 둘 다 0.95보다 큰 상관계수($R^2$) 값을 나타내었다. 연구의 결과들은 열처리 된 탄화 정수 슬러지가 수중으로부터 납과 카드뮴을 제거하는데 효율적인 흡착제로 사용될 수 있다는 것을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.163-171
• /
• 2014

Environmental issues about indoor air quality have been increased and focused on volatile organic compounds (VOCs) caused cancer, asthma, and skin disease. Reducing VOCs has been attempted in many different methods such as using environmentally friendly materials and air cleaner or purifier. Charcoal is well known material for absorbing VOCs. Therefore, carbonized board from medium density fiberboard has been developed. We assumed that the source of carbonized boards can be any type of wood-based panels. In this study, carbonized boards were manufactured from oriented strand board (OSB) at 400, 600, 800, and $1000^{\circ}C$. Each carbonized OSB (c-OSB) was evaluated and determined physiomechanical characteristics such as exterior defects, dimensional shrinkage, modulus of elasticity, and bending strength. No external defects were observed on c-OSBs at all carbonizing conditions. As carbonizing temperature increased, less porosity between carbonized wood fibers was observed by SEM analysis. The higher rate of dimensional shrinkage was observed on c-OSB at $1000^{\circ}C$ (66%) than c-OSB at 400, 600, and $800^{\circ}C$ (47%, 58%, and 63%, respectively). The densities of c-OSBs were lower than original OSB, but there was no significant different among the c-OSBs. The bending strength of c-OSB increased 1.58 MPa (c-OSB at $400^{\circ}C$) to 8.03 MPa (c-OSB at $1000^{\circ}C$) as carbonization temperature increased. Carbonization temperature above $800^{\circ}C$ yielded higher bonding strength than that of gypsum board (4.6 MPa). In conclusion, c-OSB may be used in sealing and wall for decorating purpose without additional artwork compare to c-MDF which has smooth surface.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.161-165
• /
• 2004

This study has been conducted to develop a new recycling technology of sewage sludge using a carbonization process. The carbonizing yield, the calorific value and EC(electric conductivity) of carbonized sewage sludge had a tendency to be decreased with increase of the carbonizing temperature and time, but pH and the C/N were increased with increase the carbonizing temperature and time. The whole pore volume of carbonized sludge processed in the carbonizing furnace was /g, which was smaller than that in the electric furnace. But, the rates of mesopore and macropore were found to account for 100% therein. Rate of color and organic materials removal for dyeing wastewater were determined 70~97%, 78~83% on cotton yarn, 88~96%, 69~80% on wool wastewater and 77~89%, 77~87% on towel compared with powder activated carbon. Effect of carbonized sludge on chrysanthemum growth was investigated. Plant height and number of leaves was better mixture of carbonized sludge than comparison.

• 한국유기농업학회:학술대회논문집
• /
• 한국유기농학회 2009년도 하반기 학술대회
• /
• pp.317-317
• /
• 2009

The effects of environment-friendly materials carbonized rice hull and wood vinegar on the improvement of rice quality and soil fertility were investigated. Combined application of carbonized rice hull and chemical fertilizer resulted in lower protein in rice, similar amylose content and generally higher palatability values. Combined application of wood vinegar and chemical fertilizer obtained high protein and amylose contents, and palatability values. However, both carbonized rice hull and wood vinegar did not exhibit weed control. In the carbonized rice hull treatments, soil K was high during heading stage while soil pH during harvest stage was low. In the case of wood vinegar treatments, clear distinction between total K and Ca was observed. K was high during tillering stage while Ca was high until harvest stage.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.743-750
• /
• 2013

In this study, the carbonized aggregate of light weight and high mechanical strength using sewage sludge was evaluated with changing carbonation variables of temperature, detention time and feed condition. Porosity and mechanical strength was simultaneously increased according to increase of carbonization temperature unexpectedly. Carbonization detention time above 1 hour nearly affect on the porosity, but mainly on mechanical strength of the carbonized aggregate in case of clay addition. On $900^{\circ}C$, porosity and mechanical strength was increased rapidly, but above $1000^{\circ}C$, porosity began to decrease. Clay addition was very effective on increase of mechanical strength following much loss in porosity. The carbonized aggregate manufactured at $900^{\circ}C$ adding 30 % clay in sewage sludge was higher a little in porosity and 3 times in mechanical strength than those at $700^{\circ}C$ not adding clay. Consequently, in manufacturing the carbonized aggregate having simultaneously high porosity and mechanical strength, it is desirable to have operational condition of $900{\sim}1000^{\circ}C$ temperature and 1 hour time, and clay addition within 30 % for further higher mechanical strength.

• Carbon letters
• /
• 제16권1호
• /
• pp.62-66
• /
• 2015

In this study, carbonized fibers were prepared by using acidically cross-linked LDPE fibers. The surface morphologies of the carbonized fibers were observed by SEM. The effects of cross-linking process temperatures were studied using thermal analyses such as DSC and TGA. The melting and heating enthalpy of the fibers decreased as the cross-linking temperature increased. The cross-linked fibers had a carbonization yield of over 50%. From SEM results the highest yield of carbonized LDPE-based fibers was obtained by cross-linking at a sulfate temperature ($170^{\circ}C$). As a result, carbonation yield of the carbonized fibers was found to depend on the functions of the cross-linking ratio of the LDPE precursors.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.45-51
• /
• 2002

In this study, the fracture characteristics of carbonized silicon grinding wheels were examined with tensile, compression, impact and bending test. The experiment was performed for the various grinding wheels with grain size #46, #80, and grade H, L, P, and one vitrified bond and one structure No.7. Also the centrifugal fracture rpm of carbonized silicon grinding wheels were measured and compared with the calculated values for the various wheel diameters and thicknesses. The results showed that the fracture tensile strength was $1.5~2.0Kg_f/mm^2$, and it was increased by decreasing grain size and increasing grade. The fracture compression loads were $1,600~3,000Kg_f$, and the inner stress was higher than outer's. And the absorption energy of impact test was 3.3~4.7 J, and it was increased by decreasing grain size but it was not effected by grade. The fracture bending stress was $0.1~0.2Kg_f/mm^2$, and it was increased by decreasing grain size and increasing grade. The centrifugal fracture rpm of carbonized silicon grinding wheel was about 8,500~12,000 and agreed well with the calculated value, and it was increased by decreasing diameter. However, it was almost constant for the reduction of wheel thickness.