• 환경위생공학
• /
• 제14권1호
• /
• pp.97-102
• /
• 1999

This study was carried out view that reuse of sludge of adsorbent for benzene in carbonized cast compare with activated carbon. Not only the carbonized cast is good than carbonized carbon in cation exchange capacity and 12 adsorption capacity, but also benzene adsorption capacity is no differences compare to activated carbon. As results, benzene adsorption capacity of carbonized cast and activated carbon are decreased as temperature increase($25~70^{\circ}C$).It is compatible in Lamgmuir model. Therefore, carbonized cast is applied general adsorbent. From experimental results and data regression, in model concerning effect of temperature, relative errors between the experimental data and those calculated by the model are within the range of 1.2~7.8%. In relative humidity effect (RH 0.25~0.50) of benzene adsorption, modified Freundlich model : $QB_{enzene}{;\}QB_{enzene},{\}_{RH=0}=1-kRH^{IN}$, relative errors between the experimental data and those calculated by the model are within are range of 0.5-5.1%. The constants k and l/n in equation were found to be 1.25, 1.89 in carbonized cast.

• 농업과학연구
• /
• 제50권2호
• /
• pp.231-239
• /
• 2023

Ammonia (NH₃) emitted from the use of fertilizers during agricultural practice generates particulate matter and odors. The application of carbonized rice husk, an eco-friendly material, is one of the measures used to reduce NH₃. The objective of this study was to evaluate the effect of the application rate and pH of carbonized rice husk on NH₃ emissions and soil quality. An experiment to assess NH₃ emissions was performed in a glasshouse using a static chamber method. The pH of the carbonized rice husk was divided into acidic, neutral, and basic groups, and the carbonized rice husk application rates were 1, 3, and 5% of the soil weight. NH₃ emissions showed a sharp increase within three days after the inorganic fertilizer was applied. Subsequently, NH₃ emissions decreased rapidly after basal fertilization compared to primary and secondary top-dressing. When carbonized rice husks were applied to soil, NH₃ emissions decreased in all treatments, and neutral carbonized rice husk was the most effective in comparison with acidic and basic carbonized rice husk. The application rate of carbonized rice husk and NH₃ emissions showed a negative correlation, and the lowest emissions were found in units with a 5% application rate. Also, there was no statistically significant difference between NH₃ emissions according to the application rate of carbonized rice husk, and when carbonized rice husks were applied at a 5% rate, soil OM increased excessively. Therefore, it is recommended to apply only 1% neutral carbonized rice husk to most effectively reduce NH₃ emissions in the soil.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.555-562
• /
• 2014

Characteristics of carbonized fiberboard such as chemical materials absorption, electromagnetic shielding, and electrical and mechanical performance were determined in previous studies. The carbonized board therefore confirmed that having excellent abilities of these characteristics. In this study, the effect of density on physical properties and sound absorption properties of carbonized fiberboards at $800^{\circ}C$ were investigated for the potential use of carbonized fiberboards as a replacement of conventional sound absorbing material. The thickness of fiberboards after carbonization was reduced 49.9%, 40.7%, and 43.3% in low density fiberboard (LDF), medium density fiberboard (MDF), and high density fiberboard (HDF), respectively. Based on SEM images, porosity of carbonized fiberboard increased by carbonization due to removing adhesives. Moreover, carbonization did not destroy structure of wood fiber based on SEM results. Carbonization process influenced contraction of fiberboard. The sound absorption coefficient of carbonized low density fiberboard (c-LDF) was higher than those of carbonized medium density fiberboard (c-MDF) and carbonized high density fiberboard (c-HDF). This result was similar with original fiberboards, which indicated sound absorbing ability was not significantly changed by carbonization compared to that of original fiberboards. Therefore, the sound absorbing coefficient may depend on source, texture, and density of fiberboard rather than carbonization.

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.424-429
• /
• 2016

본 연구에서는 중밀도섬유판, 파티클보드, 배향성스트랜드보드, 합판을 이용하여 탄화보드를 제조하고 각각의 흡방습 특성을 살펴보았다. 탄화보드는 $600^{\circ}C$에서 2시간 동안 열분해하는 조건으로 제조되었다. 그 결과, 탄화합판, 탄화OSB, 탄화MDF, 탄화파티클보드 순으로 높은 흡방습 성능을 나타내었다. 흡습률 및 방습률은 탄화파티클보드를 제외한 나머지 탄화보드들 간에 큰 차이는 발견하지 못했다. 이것은 목질재료가 탄화됨으로서 탄소로 변환되어 수분을 흡착하는데 높은 능력을 가졌지만 수분이 내부구조로까지의 이동에 있어서는 목재 본래의 구조에 영향을 받는다는 것을 의미한다. 따라서 목재의 구조의 특성을 살려 탄소화 했을 때 높은 흡방습 특성을 가진 탄화보드를 제조할 수 있다.

• Journal of Biosystems Engineering
• /
• 제23권1호
• /
• pp.13-20
• /
• 1998

Carbonized rice husk(char from rice husk) can be used to improve soils for planting, seedlings, horiculture, pomiculture and truck gardening. Although it is not a fertilizer in nature, it stimulates the growth of plants. Carbonized rice husk is highly recommended for raising soil/water temperature, keeping moisture and aerating roots of plants. The objective of this study was to develop the effective production method of carbonized rice husks by a non-slagging vertical cyclone combustor. A cyclone combustor w vortex collecor Pocket in addition to central collector pocket was selected and tested. Isothermal tests and mixed firing with LPG and rice husk were performed in order to characterize the system. hut rice husk was used during the isothermal test to find the mass collected of rice husk. It was impossible to ignite rice husk itself over the experimental conditions considered in this experiment. The composition of original and carbonized rice husks was analyzed by the ultimate analysis. With the air flow rate of 20 ㎥/h, LPG flow rate of 0.45 1/min, the required carbonized rice husk could be obtained.

• 유기물자원화
• /
• 제31권1호
• /
• pp.57-68
• /
• 2023

본 연구에서는 커피 폐기물 기반의 질소가 포함된 다공성 탄소 섬유 형태로 제조하여 고에너지 EDLC용 탄소 소재로 활용하고자 하였다. 커피 폐기물은 분쇄과정을 거쳐 폴리비닐피롤리돈과 용매인 다이메틸폼아마이드에 혼합한 후 전기방사를 통해 커피 폐기물 기반의 섬유 형태(Bare-CWNF)의 물질로 만들었으며, 질소 분위기의 900℃에서 탄화를 진행하여 커피 폐기물 기반의 질소가 포함된 다공성 섬유 형태(Carbonized-CWNF)의 물질을 제조하였다. Carbonized-CWNF는 Bare-CWNF와 같이 섬유 형태를 유지하였으며 질소 함량 역시 유지되는 것을 확인하였다. 커피 폐기물의 탄화 탄소(Carbonized-CW)및 폴리아크릴로나이트릴 기반의 탄소섬유(Carbonized-PNF)를 Carbonized-CWNF와 -1.0-0.0V의 전압 범위에서 전기화학적 성능을 비교한 결과, Carbonized-CWNF가 가장 높은 비정전용량(123.8F g^-1 @ 1A g^-1)을 확보할 수 있었다. 이를 통해 커피 폐기물 기반의 질소가 함유된 다공성 탄소 섬유가 고에너지 EDLC(Electric double layer capacitor)용 전극으로 우수한 성능을 나타내는 것을 확인하였다. 최종적으로, 환경 오염의 원인이 되는 식물성 바이오매스 중 커피 폐기물을 활용하여 친환경성을 확보하였고, 식물성 바이오매스와 같은 폐기물을 슈퍼커패시터와 같은 고성능 에너지 저장 매체로의 탈바꿈 할 수 있는 가능성을 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.143-144
• /
• 2020

For modern people who spend 80% of the day indoors, indoor air quality is an important factor in their lives. Radon and fine dust, which are indoor air quality pollutants, cause various diseases and lung diseases, so a method is needed to reduce them. Therefore, this study intends to utilize the air pollutant adsorption properties of the carbonized sludge by using the carbonized sludge generated through drying and carbonization of the sludge. As a result of the experiment, it was shown that the concentration of radon and fine dust gradually decreased as the replacement ratio of carbonized sludge increased. The reason is that the carbonized sludge has the ability to adsorb fine dust and radon, so it is considered that it gradually decreases as the replacement ratio increases. Also, the compressive strength and flexural strength tend to decrease gradually. The reason for this is that the carbonized sludge has a number of internal voids, and as the replacement ratio increases, the internal voids increase and the strength decreases. If the refinement and strength of the carbonized sludge replacement ratio are supplemented, it is believed that it will be able to replace the existing finishing materials.

• 한국토양비료학회지
• /
• 제49권1호
• /
• pp.1-6
• /
• 2016

Carbonized biomass could be used as a mechanism for long-term storage of C in soils. However, experimental results are variable. Objective of this study was carried out to evaluate the effect of carbonized biomass made from soybean residue on soil organic carbon and seed yield during soybean cultivation. The carbonized biomass was made by field scale mobile pyrolyzer. Pyrolyzer was performed in a reactor operated at $400{\sim}500^{\circ}C$ for 2 hours using soybean residue. The treatments consisted of four levels as the control without input and three levels of carbonized biomass inputs as $357kg\;ha^{-1}$, C-1 ; $714kg\;ha^{-1}$, C-2 ; $1,428kg\;ha^{-1}$, C-3. It was appeared that seed yield of soybean was $2,847kg\;ha^{-1}$ for control, $2,897kg\;ha^{-1}$ for C-1, $2,946kg\;ha^{-1}$ for C-2 and $3,211kg\;ha^{-1}$ for C-3 at the end of experiment. It was shown that the contents of SOC were $5.21g\;kg^{-1}$ for C-1, $5.93g\;kg^{-1}$ for C-2, $7.00g\;kg^{-1}$ for C-3 and $4.73g\;kg^{-1}$ for the control at the end of experiment. Accumulated SOC contents linearly significantly (P < 0.001) increased with increasing the carbonized biomass input. The slopes (0.00162) of the regression equations suggest that SOC contents from the soil increase by $0.162g\;kg^{-1}$ with every $100kg\;ha^{-1}$ increase of carbonized biomass rate. Consequently the carbonized biomass for byproducts such as soybean residue could increase SOC. It might be considered that the experimental results will be applied to soil carbon sequestration for future study. More long-term studies are needed to prove how long does SOC stay in agricultural soils.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.656-669
• /
• 2018

Tropical bamboo species, which have a very rapid growth rate, are considered as a promising non-timber forest product capable of exhibiting new functionality by carbonization technology. This study was conducted to compare the characteristics of carbonized bamboos from Andong (G. pseuudoarundinacea (Steudel) Widjaja), Hitam (G. atrovialacea), Tali (G. apus), Kuning (B. vulgaris Var. striata (Lodd. Ex Lindl)), and Ampel (B. vulgaris Scharad. ex Wendland), and Betung (D. asper). Each bamboo was carbonized at 200, 400, 600, 800, and $1,000^{\circ}C$, respectively, and their physical and anatomical characteristics were investigated. The result showed that the volume and weight of carbonized bamboo decreased with increasing carbonization temperature and showed the substantial changes of volume and weight between 200 and $400^{\circ}C$. The highest and the lowest density of carbonized samples were found in Ampel bamboo and Betung bamboo, respectively. The density of all carbonized bamboos tended to decrease after carbonization at 200 and $400^{\circ}C$ and relatively become constant afterwards. The carbonized bamboo prepared at 800 and $1,000^{\circ}C$ showed better refining degree. The results of the anatomical observation showed that the vascular diameter of carbonized bamboo decreased with increasing carbonization temperature, and the shrinkage in radial and tangential direction showed similar tendency. Statistical analysis showed that there was significant correlation between physical contraction and anatomical contraction. Based on the results of this study, comprehensive data about Indonesian bamboo charcoals could be obtained and it will be useful for future application studies.

• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.60-66
• /
• 2018

탄화보드의 신용도개발을 위하여 합판, 파티클보드, 중밀도섬유판 및 물푸레나무를 $400{\sim}1100^{\circ}C$로 탄화하여 탄화온도가 탄화보드의 표면온도에 미치는 영향을 검토하였다. 탄화보드의 표면온도는 시간이 경과함에 따라 경과시간 12분까지는 급격히 상승하다가, 그 이후에는 완만히 상승하였으며 20분 이후부터는 온도가 안정화되었다. 제조시 탄화온도가 높을수록 제조된 탄화보드의 밀도가 크고 시간경과에 따른 표면온도가 높아 밀도가 표면온도상승에 영향을 미친 것으로 판단된다. 실리콘러버히터의 표면온도보다 탄화보드의 표면온도 하강속도가 느려 탄화보드가 오랜 시간 열을 유지하였다.