• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.59-67
• /
• 2012

시멘트를 생산할 때 발생하는 이산화탄소로 인하여 콘크리트를 활용하는 건설산업의 친환경성이 문제시 되어가고 있는 실정이다. 이에 본 연구에서는 석회석미분말로 시멘트를 대체하는 기술의 기초연구로서 석회석미분말을 함유한 콘크리트의 내구특성에 관하여 특성을 파악하고자 하였다. 실험변수는 석회석미분말의 시멘트 치환률을 0%에서 25%까지 5%씩 중가하였으며 동결융해 저항성, 제설염 저항성 및 알칼리-실리카반응 저항성 등의 내구특성과 기초적인 경화특성 등을 분석하였다. 석회석미분말의 사용으로 인한 동결융해저항성, 제설제염 저항성 등의 영향은 거의 없는 것으로 나타났으며 또한 알카리-실리카반응성의 억제를 위하여도 긍정적으로 검토될 수 있을 것으로 판단된다.

• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.402-407
• /
• 2006

NiO/YSZ(70 wt%NiO) composite powders were prepared by ball-milling of 8YSZ and NiO precursors, dried and then followed by calcination. The approach was to combine acidic $Ni(NO_3)_2{\cdot}6H_2O$ and basic $2NiCO_3{\cdot}3Ni(OH)_2{\cdot}4H_2O$ via acid-base reaction as a mixed NiO precursor. Their effects were studied in the aspects of DSC, microstructure, porosity, and electrical conductivity. Ni/YSZ composite of 1N9C (1 mole NiO from the nitrate and 9 moles of NiO from the carbonate) was prepared by consolidation at $1400^{\circ}C$ for 3 h, and then followed by reduction at $1000^{\circ}C$ for 3 h under flowing of 6% $H_2/N_2$. It showed a homogeneous microstructure with ${\sim}20%$ porosity and 1880 S/cm at $1000^{\circ}C$.

• 한국환경보건학회지
• /
• 제23권1호
• /
• pp.34-42
• /
• 1997

A laboratory experiments were performed to investigate the treatment of photographic processing wastewater by chemical oxidation and biological treatment system. The effect of reaction conditions such as hydrogen peroxide dosage, ferrous sulfate dosage and pH on the COD removal in Fenton oxidation were investigated. The optimal dosage of hydrogen peroxide was 2.58 M and 3.87 M for the developing and fixing process wastewater, respectively. The Fenton oxidation was most efficient in the pH range of 3-5 and the optimal condition for initial reaction pH was 5 for a developing process wastewater. With iron powder catalyst, the COD for a developing process wastewater was removed in lower pH than with ferrous sulfate catalyst. The removal efficiency of COD for refractory compounds such as Diethyleneglycol, Benzylalcohol, Hydroxylamine Sulfate, Ammonium Thiosulfate, Ammonium Ferric EDTA and Disodium EDTA in the photogaphic wastewater was found than 90% except Potassium Carbonate. When the photographic processing wastewater after pretreatment by Fenton oxidation was treated with batch activated sludge process, the addition of $KH_2PO_4$ as a phosphorous compound improved the removal efficiency of COD. During the continuous biological treatment of developing and fixing process wastewater after pretreatment by Fenton oxidation, the effluent COD concentration less than 100 mg/l was obtained at 0.425 and 0.25 kgCOD/m$^3$.d, respectively.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.337-341
• /
• 2019

In this study, the effects of two materials, active alumina and CaO based inorganic binder, which cause the side reaction on the K₂CO₃-based solid CO₂ sorbents was investigated. K₂CO₃-based solid sorbents called KAM series was prepared by spray drying method and then measured its physical properties and CO₂ sorption capacity. Among the KAM series sorbents, KAM(0.5) maintained high CO₂ sorption capacity of 7.6 wt% after 3 cycle of sorption/regeneration reaction and showed very low attrition loss as low as 3.1 % which was measured by ASTM D5757-95.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.145-150
• /
• 2012

Pb-contaminated soil at a clay shooting range was analyzed by the sequential extraction method to identify metal binding properties in terms of detrital and non-detrital forms of the soil. Most of the metals in the soils existed as non-detrital forms, exchangeable and carbonate-bound forms, which could be easily released from the soil by a washing method. Therefore, the characteristics of Pb desorption for remediation of the Pb-contaminated soil were evaluated using hydrochloric acid (HCl) by a washing method. Batch experiments were performed to identify the factors influencing extraction efficiency. The effects of the solid to liquid (S/L) ratio (1:2, 1:3, and 1:4), soil particle size, and extraction time on the removal capacity of Pb by HCl were evaluated. Soil samples were collected from two different areas: a slope area (SA) and a land area (LA) at the field. As results, the optimal conditions at 2.8 to 0.075 mm of particle size were 1:3 of the S/L ratio and 10 min of extraction time for SA, and 1:4 of the S/L ratio and 5 min of extraction time for LA. The characteristics of Pb desorption were adequately described by two-reaction kinetic models.

• Archives of Pharmacal Research
• /
• 제29권9호
• /
• pp.721-727
• /
• 2006

To continue exploration of structure activity relationship of novel 1-(indoline-5-sulfonyl)-4-phenylimidazolidinones (1) reported as anticancer agent with broad spectrum, three 1-(arylsulfonyl)-4-vinylimidazolidinones (2) were synthesized from methyl serinate (3) in 8 steps. Reaction of intermediate 2-phenoxycarbonylaminobut-3-enyl p-toluenesulfonate (10) with arylsulfonamide in the presence of potassium carbonate produced corresponding 2 and N-(4-vinyloxazolidin-2-yl)arylsulfonamide 11 in approximately equal ratio. This reaction is believed to undergo through urea intermediate 16 as shown in scheme 3. 1-Arylsufonyl-4-vinylimidazolidinones 2 show much reduced activity against human colon carcinoma (Colo205), human chronic myelogenous leukemia (K562), and human ovarian adenocarcinoma (SK-OV-3) and compatible activity against human lung carcinoma (A549) compared to 1. Therefore phenyl at 4-position should be the optimum planar motif for the activity of 1.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.122-126
• /
• 2002

A molecularly imprinted polymer (MIP) having both amidine and imidazole functional groups in the active site has been prepared using p-nitrophenyl phosphate as a transition state analogue (TSA). The imprinted polymer MIP with amidine and imidazole found to have the highest hydrolysis activity compared with other MIPs with either amidine or imidazole groups only. It is postulated a cooperative effect between amidine and imidazole in the hydrolysis of p-nitrophenyl methyl carbonate (NPMC) as a substrate when both groups were arranged in proximity by molecular imprinting. The rate enhancement of the hydrolysis by MIP was 60 folds over the uncatalyzed solution reaction and two folds compared with the control non-imprinted polymer CPI having both functional groups. The enzyme-mimetic catalytic hydrolysis of p-nitrophenyl acetate by MIP was evaluated in buffer at pH 7.0 with $K_{m}$ of 1.06 mM and $k_{cat}$ of 0.137 $h^{-1}$ . . .

• Archives of Pharmacal Research
• /
• 제17권4호
• /
• pp.281-283
• /
• 1994

5-sec-butylthiomethyl-5-alkyl (methyl or phenyl) hydantoins (3-x) were prepared by the reaction of sec-buylthiomethyl alkyl (methyl or phenyl) ketone (1-2), potassium cyanide and ammonium carbonate. 3-(2-Bromoethyl) hydantoins (5-6) were the reaction products of 5-sec-buythiomethyl-5-alkyl (methyl or phenyl) hydantoin and 1, 2-dibromothane in the presence of potassium hydroxide. Alkylation of 5 and 6 with an excess of alkyl (methyl or ethyl iodide in THF with sodium hydride as base gave three 1-alkyl (methyl or ethyl)-3-(2-bromoethyl) hydantoins (7-9). Treatment of the 2-bromothyl group with potassium thioacelate and triethylamine gave three 1-alkyl (methyl or ethyl)-3-92-acetylthioethyl) hydantoins (10-12). Hydrolysis of the 2-acetylthiuoethyl group with sodium hydroxide in methanol afforded the three 1-alkyl (methyl or ethyl)-3-(2-mercaptorthyl) hydantoins.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.172-178
• /
• 2013

This study examined the electrochemical deposition and dissolution of lithium on nickel electrodes in 1 mol $dm^{-3}$ (M) $LiPF_6$ dissolved in propylene carbonate (PC) containing different 1,2-dimethoxyethane (DME) concentrations as a co-solvent. The DME concentration was found to have a significant effect on the reactions occurring at the electrode. The poor cycleability of the electrodes in the pure PC solution was improved considerably by adding small amounts of DME. This results suggested that the dendritic lithium growth could be suppressed by using co-solvents. After hundredth cycling in the 1 M $LiPF_6$/PC:DME (67:33) solution, almost no dead lithium has been found from the disassembled cell, resulting from suppression of dendritic lithium growth. Scanning electron microscopy revealed that dendritic lithium formation was greatly affected by the ratio of DME. Raman spectroscopy results suggested that the structure of solvated lithium ions is a crucial important factor in suppressing dendritic lithium formation.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.617-621
• /
• 2014

An efficient and selective method for the synthesis of ethyl 2-amino/aryloxy-3-aryl-4-oxo-5-phenyl-4,5-dihydro-3H-pyrrolo[3,2-d]pyrimidine-7-carboxylate derivatives has been developed. The main process involved the reaction of diethyl 1-phenyl-3-((triphenylphosphoranylidene)amino)-1H-pyrrole-2,4-dicarboxylate and aromatic isocyanates, followed by addition of amines/phenols in the presence of catalytic amount of sodium ethoxide or solid potassium carbonate.