• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.183-191
• /
• 1991

A study was conducted to determine the influence of soil chemical properties on the distribution and forms of cadmium (Cd), lead (Pb), copper(Cu) and Zinc(Zn) in paddy soils near zinc mines. A sequential extraction procedure was used to fractionate the heavy metals in soils into the designated from of water soluble, exchangeable, organically bound, oxide/carbonate, and sulfide/residual. The predominant form of Cd, Pb, Cu and Zn in the soils was found to be sulfide/residual form. Oxide/carbonate Cd and Pb and organically bound Cu were high, while exchangeable Pb and Cu were very low. Water soluble Cd, Pb and Cu were not detected in the soils. The percentages of the heavy metals content in exchangeable fractions were inversely correlated with those in sulfide/residual fractions in the soils. Exchangeable Cd and Zn and the oxide/carbonate Pb were shifting to the sulfide/residual form with soil depth and the chemical forms of Cu were not changed. Organically bound Cu was positively correlated with soil organic matter content but Cd, Pb and Zn were not. The percentages of Cd, Pb and Zn content in exchangeable forms decreased with soil pH, while those in oxide/carbonate and sulfide/residual forms increased with soil pH. The amounts of oxide/carbonate and sulfide/residual forms of pb were higher than those of Cd and Zn at same soil pH.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.24-31
• /
• 2008

In this work, calcium hydroxide and magnesium carbonate as metal ionic crosslinking agents were used to introduce ionic crosslinking points to the ethylene vinylacetate (EVA) emulsions for the enhancement of water resistance and mechanical properties of emulsion films. The properties of EVA emulsion film were investigated in crosslinking density, thermal features, surface energy, and mechanical properties, such as tensile strength, elongation at break and tear strength. With the increasing content of metal ionic crosslinking agent, the crosslinking density of the EVA emulsion film increases, resulting into the improvement of water resistance. The surface energy and mechanical properties of the EVA emulsion film, however, showed somewhat different behaviors. The highest surface energy, tensile strength, and tear strength were observed when 0.4% for calcium hydroxide and 0.5% for magnesium carbonate was added respectively, because the EVA emulsion containing carboxylic acid forms strong carboxylate-metal bond of ionically-crosslinked system. Therefore, it can be concluded that metal ionic crosslinking agents, such as magnesium carbonate and calcium hydroxide are considered to improve water resistance and mechanical properties of the EVA emulsion.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.112-116
• /
• 2005

This study was performed to investigate the effect of vinegar on the solubility of 3 types of calcium. After solubilized, total acidity and calcium content were increased as initial acid and calcium concentration increased. Addition of vinegar resulted in pH decrement while total acidity increment. Calcium content in seaweed calcium and calcium carbonate were higher than that in nano calcium. Saturated concentration of seaweed calcium and calcium carbonate were $7.0\%$ (w/v) and $6.0\%$ (w/v), respectively, in vinegar and calcium content were $2,234\;mg\%$ and $2,490\;mg\%$, respectively.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.347-359
• /
• 2023

With the development of infrastructure, there is a critical shortage of filling materials all over the word. However, a large amount of silt accumulated in the lower reaches of the Yellow River is treated as waste every year, which will cause environmental pollution and waste of resources. Microbial induced calcium carbonate precipitation (MICP) technology, with the advantage of efficient, economical and environmentally friendly protection, is selected to solidify the abandoned Yellow River silt with poor mechanical properties into high-quality filling material in this paper. Based on unconfined compressive strength (UCS) test, determination of calcium carbonate (CaCO₃) content and scanning electron microscope (SEM) test, the effects of cementation solution concentration, treatment times and relative density on the solidification effect were studied. The results show that the loose silt particles can be effectively solidified together into filling material with excellent mechanical properties through MICP technology. The concentration of cementation solution have a significant impact on the solidification effect, and the reasonable concentration of cementation solution is 1.5 mol/L. With the increase of treatment times, the pores in the soil are filled with CaCO₃, and the UCS of the specimens after 10 times of treatment can reach 2.5 MPa with a relatively high CaCO₃ content of 26%. With the improvement of treatment degree, the influence of relative density on the UCS increases gradually. Microscopic analysis revealed that after MICP reinforcement, CaCO₃ adhered to the surface of soil particles and cemented with each other to form a dense structure.

• Journal of Food Hygiene and Safety
• /
• v.19 no.4
• /
• pp.203-208
• /
• 2004

The shells of Anadarac tegillarca granosa, Crassostrea gigas, Crassostrea nippona, and Patinopecten yessoensis were used for preparation of calcium carbonate with high purity. Calcium content in ash of shell was the highest $64.9\%$ in Anadarac tegillarca granosa ashed for 5 hr at $900^{\circ}C$, and followed as Patinopecten yessoensis $62.5\%$, Crassostrea gigas $62.4\%$, and Crassostrea nippona $61.5\%$. Whiteness of ash was the highest 81.6-85.8 in Patinopecten yessoensis shell. Calcium contents in calcium carbonates made with shells of Anadarac tegillarca granosa by using ammonium chloride process (ACP) and ammonium nitrate process (ANP) were higher $40.03-40.04\%$ than $39.92\%$ in Anadarac tegillarca granosa ash. Calcium content was the highest $40.04\%$ in pH adjusted calcium carbonate prepared by using ANP. Whiteness of calcium carbonate prepared by using ACP and ANP was the level of 101.0-101.5. Therefore, we estimated that the calcium carbonate made by using ACP and ANP could be used potentiality as a food additive for calcium supplement.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.33-38
• /
• 2007

The peak time, peak height, width at peak, and the width at 8 min of Mixograph increased as the amount of sodium chloride in yellow alkaline noodle sheet was increased. The peak time of the Mixograph duration increased almost twice when 0.5% sodium carbonate was added to yellow alkaline noodle sheet, but decreased when the amount of sodium carbonate was above 0.5%. The peak height decreased as the amount of sodium carbonate increased. Protein content and sedimentation values showed positive correlations with the Mixograph peak height, width at peak, and width at 8min. The pasting temperature, peak viscosity, minimum viscosity, and final viscosity increased as the amount of sodium chloride in yellow alkaline noodle sheets was increased for all wheat flours. The peak viscosity, minimum viscosity, and final viscosity also increased as the amount of sodium carbonate increased. The pasting temperature showed a positive correlation with the water retention capacity and the alkaline water retention capacity.

• Carbon letters
• /
• v.24
• /
• pp.62-72
• /
• 2017

The aim of this work was to evaluate the dielectric properties of impregnated and activated palm kernel shells (PKSs) samples using two activating agents, potassium carbonate ($K_2CO_3$) and sodium hydroxide (NaOH), at three impregnation ratios. The materials were characterized by moisture content, carbon content, ash content, thermal profile and functional groups. The dielectric properties were examined using an open-ended coaxial probe method at various microwave frequencies (1-6 GHz) and temperatures (25, 35, and $45^{\circ}C$). The results show that the dielectric properties varied with frequency, temperature, moisture content, carbon content and mass ratio of the ionic solids. PKSK1.75 (PKS impregnated with $K_2CO_3$ at a mass ratio of 1.75) and PKSN1.5 (PKS impregnated with NaOH at a mass ratio of 1.5) exhibited a high loss tangent ($tan{\delta}$) indicating the effectiveness of these materials to be heated by microwaves. $K_2CO_3$ and NaOH can act as a microwave absorber to enhance the efficiency of microwave heating for low loss PKSs. Materials with a high moisture content exhibit a high loss tangent but low penetration depth. The interplay of multiple operating frequencies is suggested to promote better microwave heating by considering the changes in the materials characteristics.

• Journal of Nutrition and Health
• /
• v.27 no.5
• /
• pp.473-482
• /
• 1994

This study was to compare the bioavailability of calcium from anchovy and tofu to those of calcium from calcium carbonate(CaCO3)as the control diet and non-fat dry milk(NFDM). Rats weighing 50-60g were placed on experimental diets and deionized water at free access for 4 weeks. Diets contained 0.2% calcium from calcium-carbonate, NFDM, anchovy, tofu or 0.5% calcium as obtained were as follows : 1) No significant differences in the apparent absorption of calcium(62.5%-71.0%) were observed in the rats fed four different calcium sources at the level of 0.2% while 0.5% calcium diet group apparently absorbed calcium less efficiently(52.2%). 2) Bone length of tibia and femur was not significantly different among the groups, though 0.5% calcium of control group showed slightly longer length. 3) Tibia fat-free dry weights of 0.2% calcium of NFDM and anchovy diet groups were not significantly different from that of 0.5% calcium of control group. For femurs NFDM, anchovy and tofu groups were similar in their fat-free dry weight to that of 0.5% calcium group. 4) For calcium contents tibia contents tibia from anchovy treated group showed higher value than calcium-carbonate and tofu groups and the value was not significantly different from that of 0.5% calcium group. In femur NFDM, tofu and calcium-carbonate groups were not significantly different in their calcium content but 0.5% calcium group had higher level of calcium than 0.2% calcium groups. 5) The normalized values(NV) show that there was no significant differences in NV among 0.2% CaCO3 anchovy and tofu groups, while NV of NFDM group was significantly lower than that of calcium-carbonate group. NV of 0.5% calcium group was a little more than 50% of those in 0.2% calcium groups. Though the values obtained for the calcium bioavailability were somewhat variable among experimental products, it was demonstrated that anchovy and tofu are as good as NFDM for the dietary calcium provider when calcium intake is at marginal level.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2020

In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl₂ from NaClO₃ type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo₃·nCu(OH)₂], first reaction product, CuCo₃ is produced more than Cu(OH)₂ when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)₂ was produced more than CuCO₃. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.25-33
• /
• 1996

Stable isotopic ratios of the carbonate rocks and chemical compositions of the matrix of pebble bearing phyllitic rocks known as the Hwanggangri Formation, which are in hot debate on their origin such as tillite, debris flow and turbidite, were determined to interpret their depositional environment. Argillaceous matrix of the pebble bearing phyllitic rocks has a high content of CaO (av. 19.5%) and MgO (av. 8.3%), corresponding to calcareous sandy shale. No difference of chemical compositions including trace elements and REE is in the matrices between the Hwanggangri and the Kunjasan Formations. Carbonate rocks from the Okchon zone and outside of the zone range $-2.5{\sim}+6.1$‰ in ${\delta}^{13}C$ and $+5.8{\sim}+25.9$‰ in ${\delta}^{18}O$, indicating normal marine limestone. However, unusally $^{13}C$ enriched carbonate rocks might be deposited in the highly evaporated sedimentary basin. A wide variation of ${\delta}^{18}O$ values is responsible for metamorphism with a $^{18}O$ depleted meteoric water. Isotopic equilibrium temperatures by graphite-calcite geothermometer show a higher metamorphic temperature ($547{\sim}589^{\circ}C$) in the Okchon zone than those ($265{\sim}292^{\circ}C$) in the Samtaesan Formation of the Chosun group. Rhythmic alternation of relatively thin shale with thin limestone in the Kounri Formation is not cherty layer but thin limesilicate bed by metasomatic replacement. Judging from the isotopic and chemical compositions of the carbonate rocks and calcareous matrix of the pebble bearing phyllitic rocks, the Hwangganari Formation was deposited in the shallow marine environment favorable to debris flow.