• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2403-2412
• /
• 2018

The present study was aimed at evaluating the effect of variable sodium carbonate ($Na_2CO_3$) loading during wet air oxidation (WAO) pretreatment of rice straw in reducing biomass recalcitrance. The research study was intended to increase the cellulose recovery, hemicellulose solubilization, lignin removal in the solid fraction and limiting the generation of inhibitors in the liquid fraction while reducing the chemical input. The operating condition of $169^{\circ}C$, 4 bar, 18 min and 6.5 g/L $Na_2CO_3$ loading resulted in maximum cellulose recovery of 82.07% and hemicellulose solubilization and lignin removal of 85.43% and 65.42%, respectively, with a total phenolic content of 0.36 g/L in the liquid fraction. The crystallinity index increased from 47.69 to 51.25 along with enzymatic digestibility with an increase in $Na_2CO_3$ loading from 0 to 6.5 g/L as a result of removal of barriers for saccharification via effective cleavage of ether and ester bonds cross-linking the carbohydrates and lignin as indicated by FT-IR spectroscopy. A further increase in the $Na_2CO_3$ loading to 9.5 g/L did not significantly increase the sugar release. Thus, it was concluded that 6.5 g/L $Na_2CO_3$ during WAO is sufficient to increase the delignification and deacetylation, leading to significant changes in apparent cellulose crystallinity inter alia improvement in cellulose accessibility and digestibility of rice straw.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.103-107
• /
• 2014

Poly(acrylonitrile-butadiene-styrene) (ABS) composite sheets containing titanium dioxide ($TiO_2$), barium sulfate ($BaSO_4$), calcium carbonate ($CaCO_3$) were prepared by using a co-rotating twin screw extruder, and the reflectance and flexural modulus of the composite sheets were measured. The fillers were well dispersed in ABS matrix. The reflectance of composite sheet was increased with increasing $TiO_2$ and $BaSO_4$ content. Sheet having $TiO_2$ 20 wt% composition, with 5~20 wt% $BaSO_4$ resulted in more than 95% of reflectance. The flexural modulus of composite sheet was increased from 1864 MPa for $ABS/TiO_2/BaSO_4$ 85/10/5 (w/w/w) to 3134 MPa for $ABS/TiO_2/BaSO_4$ 55/20/25 (w/w/w).

• Nuclear Engineering and Technology
• /
• v.8 no.1
• /
• pp.1-8
• /
• 1976

For tile rapid production of fluorine-18 for medical use, the up-to-date methods of separation such as the recoil separation, the alumina column chromatography, and the distillation are reviewed. The amount of the residue, the gamma emitting impurity, and the tritium content in the product obtained by each separation method are determined. The product obtained by the nuclear recoil separation or by the alumina column chromatography is inferior to that obtained by the distillation in the purity point of view. Thus, the separation by the distillation is tile most effective especially in the case of using a natural lithium carbonate target. Carrier free fluorine-18 of about 2 mCi can routinely be produced by irradiating 7g of the natural lithium carbonate under the neutron flux of about 1$\times$10$^{13}$ n/$\textrm{cm}^2$/sec for 3 hrs, and subsequent separation by the distillation. The over-all processing time is 35-40n1in.

• Journal of Nutrition and Health
• /
• v.44 no.6
• /
• pp.474-480
• /
• 2011

Calcium (Ca) is an essential element to maintain body homeostasis. However, many factors disturb calcium absorption. Aspartic acid chelated calcium (AAC) was synthesized by new methods using calcium carbonate and aspartic acid. This study was carried out to investigate the bioavailability of AAC in Ca-deficient rats. The experimental groups were as follows: NC; normal diet control group, CD-C; untreated control group of Ca-deficient (CD) rats, CD-$CaCO_3$; $CaCO_3$ treated group of CD rats, CD-AAC; AAC treated group of CD rats, and CD-SWC; and seaweed-derived Ca treated group of CD rats. The Ca content of various types of Ca was held constant at 32 mg/day, and the four CD groups were fed for 7 days after randomized grouping. Ca content in serum, urine, and feces within feeding periods were analyzed to confirm Ca absorption. Serum Ca content was significantly higher in the CD-AAC (11.24 mg/dL) and CD-SWC (10.12 mg/dL) groups than that in the CD-C (8.6 mg/dL) group 2 hours following the first administration. The Ca content in feces was significantly lower in the CD-AAC (35.4 mg/3 days) and CD-SWC (71.1 mg/3 day) groups than that in the CD-$CaCO_3$ (98.7 mg/3 days) group (p > 0.05). AAC had a 2.3-fold higher absorption rate of Ca than that of SWC. No differences in fibula length were observed in the NC and CD groups. The fibula weights of the CD-AAC (0.33 g) and CD-SWC (0.33 g) groups increased compared to those in the CD-C (0.27 g) group; however, no significant difference was observed between the CD groups. We conclude that bioavailability of AAC is higher than that of seaweed-derived Ca or inorganic Ca. Thus, these findings suggest the AAC has potential as a functional food material related to Ca metabolism.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.290-296
• /
• 2003

Tsaiya ducks and Leghorn hens are the two major laying birds raised in Taiwan. They are all excellent egg layers. Tsaiya ducks are small in body size (1.3 kg) with bigger egg weight (65 g) and stronger eggshell breaking strength than eggs from hens. The eggshell consists mainly of calcium carbonate, hence calcium plays an important role in the eggshell formation. Magnesium is also present in eggshell in small amounts, which may have effect on maintaining eggshell quality. In comparison studies, it was shown that the duck eggshells contained higher calcium and lower magnesium content than chicken eggshells. The eggshell magnesium content was not affected by the dietary magnesium levels (690-2380 ppm) in ducks, but in hens, it increased linearly with dietary magnesium levels. The palisade layer ($5000{\times}$) of the eggshell was found to have a compact form for ducks while there are many hallow vesicles in chicken eggshells. The eggshell magnesium deposition model is different for ducks and hens with ducks having a one-peak and hens having a two-peak model. The calcium deposition model is similar for both birds. Both the carbonic anhydrase specific activity and total activity in the shell gland mucosa of ducks are higher than those in hens. Ducks retain higher magnesium and lower calcium in the shell gland mucosa and secret less magnesium and more calcium into the shell gland lumen for eggshell deposition. The ATPase specific activity is maintained fairly constant during the eggshell forming stage, indicating continuous calcium transport into the shell gland lumen for eggshell formation. The magnesium content in duck eggshells is much lower than that in hens indicating that the magnesium content in the eggshell may have an effect on eggshell quality.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.41-47
• /
• 2010

Increasing ash content of the paper is one of the most effective methods for saving raw materials and steam consumption and improving optical properties and better print quality. However, the increase of filler loading or filler content using a conventional wet end system is limited due to severe loss in strength properties, affecting runnability and product quality. This is because the filler has no ability to make bonding with cellulosic fibers. Therefore, if the technology to give filler the bonding ability is developed, the ash content of the paper can be increased more than ever. This study was carried out to modify PCC by coating its surface with starch contributing to better bonding with fibers. To prepare the modified PCC, cationic starch was selected as a polymer and then pretreatment was done by mixing PCC and cationic starch. Consequently, the pretreated PCC contributed to higher tensile strength, stiffness and opacity than the conventional filler, such as GCC and untreated PCC. However, CIE whiteness and ISO brightness decreased slightly compared to conventional fillers.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.421-426
• /
• 1994

This study was carried out to investigate the effect of $CaCO_3$ on the Chungkookjang Meju fermentation. B. subtilis was cultured on the Meju added 0, 0.01, 0.1, 1% $CaCO_3$, respectively, and the chemical composition, protease activity, amino acid and vitamin B complex were examined with fermentation time. The inner temperature of the $CaCO_3$ treatments during fermentation was increased as compared with the control group. Titratable acidity in Meju decreased as $CaCO_3$ concentration increased. And protease activity and amino-nitrogen content were however high in same order. The content of amino acid was on the increase in every treatments, it made no difference between $CaCO_3$, treatments and the control. Vitamin B complex content in the $CaCO_3$ treatments was increased than in the control. The 0.01% added treatment showed the highest amount of vitamin B complex content in all the treatments.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.55-60
• /
• 2018

In this study investigated the Controlled Low Strength Materials using coal ash and steel slag(KR slag) as the main material in the thermal power plant classified as waste resource. Bottom ash and KR slag are mixed at a ratio of 7: 3 to expand the use of industrial by-products through carbonate($CO_2$-fixation) reactions and inhibit the exudation of heavy metals. The results showed that the water content increased as the content of bottom ash increased. It was confirmed that as the powder content increased, the bleeding ratio decreased. Also, as the content of one kind of ordinary portland cement (OPC) decreased, activation of hydration reaction decreased and compressive strength decreased. However, when the mixed composition is appropriately adjusted, the compressive strength of 2.0 MPa required for the controlled low-strength material can be satisfied.

• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.128-135
• /
• 2021

In this study, the acid polyols containing acid groups were synthesized, the novel polyurethane adhesive was developed by introducing the acid polyol by content. The acid polyols were introduced, the mechanical properties showed the maximum value when the acid content was 0.1 to 0.3 wt%, and it was confirmed that the mechanical properties and adhesive strength decreased at the content higher than 0.5 wt%. As the acid group, carboxylic acid and sulfuric acid were introduced to compare properties, and carboxylic acid showed stronger hydrogen bonding potential than sulfuric acid and improved mechanical properties. In addition, the correlation between particle size and mechanical properties was confirmed by introducing ZnO and CaCO₃. When ZnO and CaCO₃ were introduced, an ionic bond was formed with an acid group, and it was confirmed that mechanical properties were increased.

• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.129-134
• /
• 2001

Liquid crystalline (LC) poly(ethylene terephthalate-co-2(3)-chloro-1,4-phenylene terephthalate) (50/50, mole/mole) [PECPT] was synthesized and blended with polycarbonate (PC). LC properties of PECPT and thermal, morphological, and rheological behaviors of the PECPT/PC blend were studied. PECPT showed the nematic LC phase and much longer relaxation time than poly(ethylene terephthalate) (PET). The apparent melt viscosity of PECPT was one third of that of FET. An abrupt torque change was observed during the blending process due to the orientation of LC domains. For the blends containing 10~30 wt% of PECPT, the complex viscosities were higher than that of PC. As PECPT content increases above 40 wt%, shear thinning was observed. The lowest complex viscosity was obtained at 40~50 wt%. Transesterification of PECPT and PC was confirmed by the selective chemical degradation of carbonate groups in PC.