• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.18-20
• /
• 2005

Polypropylene carbonate-polyvalerolactone(PPC-PVL) and polyvalerolactone (PVL) produced from exhausted carbon dioxide were degraded by Stenotrophomonas maltophilia separated from soils of waste landfill. The biodegradation was confirmed by FTIR spectrum. PPC-PVL and PVL were degraded $6.6\%,\;12\%$ respectively, at 28 days of pure Stenotrophomonas maltophilia culture.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.272-273
• /
• 2004

Filter media are one of themost important choices when bilfiltration is applied. Filter media provide adsorbing microbes with available sites for residence and the residential cells grow to degrade or decompose target waste gases. Up to date, filter media were only qualitatively analyzed. As a quantitative approach to filter material for biofiltration, a simple model based on reaction kinetics and mass action law (Ottengraf's Model in 1983) was presented. Cork, zeolite, and granulated activated carbon were tested in terms of effective surface area, cell covered fraction of adsorbing sites, surface roughness, and pore size distribution. The cell covered fraction, surface roughness and hydrophilicity was found to be closely related to the efficiency of gas degradation in biofiltration. The cork was the best candidate for cell residence and growth in this work.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.31-36
• /
• 1996

The metallic copper was recovered from sludge of the copper electro-plating plant by pyrometallurgical process. The reducing agent was Pyrolysized from waste tires and the flux was a mixture $Na_2CO_3$, $NaB_4O_7$, and glass. The green sludge contained 87.5% moisture and 12.5% solid with 56.5% Cu and 1.59% Fe. The sludge dried at $100^{\circ}C$ was analyized to be $Cu_4SO_4(OH)_6{\cdot}2H_2O$ and CuO by XRD analysis. The former was 84% and the latter 16%, However, the calcined sludge at $500^{\circ}C$ was 49% $Cu_2O(SO_4)$ and 51% CuO. The sludge could by smelted at $1100^{\circ}C$ for two hours with 6 to 8 moles carbon with respect to copper to produce metallic copper (>90%) with recovery of 9% above.

• Korean Journal of Microbiology
• /
• v.24 no.1
• /
• pp.67-72
• /
• 1986

Aromatic hydrocarbon degrading bacteria were isolated from industrial waste by using an agar plate method. The isolate DY-1 was identified as Acinetobacter sp. and found to utilize phenanthrene as tis sole carbon source. THe bacteria were proved to produce salicylic acid as an intermediate from phenanthrene through naphthalene pathway, when the products in the culture were wxamined by thin-layer chromatography. THe $Phn^+$ genes were found to be involved in two plasmids of about 4 and 40kb which were lost and not detected in the DNA samples prepared from the mitomycin C-cured cells by a gel electrophoretic analysis.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.266-268
• /
• 2011

본 논문은 폐타이어 열분해 잔류물인 char를 이용하여 수증기 활성화법으로 활성탄을 제조하였다. 활성화 온도가 증가할수록 비표면적은 증가하였으나 활성화 시간에 따른 비표면적은 3시간에서 최대를 보인 후 시간이 지속되면 비표면적은 감소하였다. 본 연구결과, 타이어열분해 잔류물 char를 이용한 활성탄 제조에 있어 최적의 실험조건은 활성화 온도 $850^{\circ}C$, 활성화 시간 3시간, 승온속도 $5^{\circ}C/min$이었으며 이 조건에서 제조한 활성탄의 비표면적은 $517.6m^2/g$으로 나타났다.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1093-1097
• /
• 2020

A composite iodine sorbent was obtained in the form of porous polymer matrix with activated carbon particles impregnated with triethylenediamine deposited on its surface. A comparative assessment of the radioactive methyliodide capturing efficiency by the composite sorbent and a sample of industrial charcoal sorbent was conducted. It was shown that under the selected testing conditions, the hydraulic resistance of the composite sorbent is lower, and the sorption capacity is higher than that of the industrial charcoal sorbent. A method for comparing the effectiveness of iodine sorbents, based on the calculation of the ratio of the sorption capacity index to the minimum capacity index, needed for the required purification degree was proposed.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.271-278
• /
• 2019

Mass cultivation of microalgae is necessary to achieve economically feasible production of microalgal biodiesel. However, the high cost of nutrients is a major limitation. In this study, corncob extract (CCE) was used as an inorganic and organic nutrient source for the mass cultivation of Chlorella vulgaris (C. vulgaris). Chemical composition analysis of CCE revealed that it contained sufficient nutrients for mixotrophic cultivation of C. vulgaris. The highest specific grow rate of C. vulgaris was obtained at pH of 7-8, temperature of $25-30^{\circ}C$, and CCE amount of 5 g/L. In the analysis using various growth models, Luong model was found to be the most suitable empirical formula for mass cultivation of C. vulgaris using CCE. Analysis of biomass and production of triacyglycerol showed that microalgae grown in CCE medium produced more than 17.23% and 3% more unsaturated fatty acids than cells cultured in Jaworski's Medium. These results suggest that growing microalgae in CCE-supplemented medium can increase lipid production. Therefore, CCE, agricultural byproduct, has potential use for mass cultivation of microalgae.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3448-3451
• /
• 2022

Biochar is a novel carbon based material derived from waste that shows promising properties for several applications. In this paper we investigate its potential use as a low cost, greener alternative to commonly used aggregates employed to enhance the neutron shielding performance of concrete. Monte Carlo simulations are performed with the PHITS code to estimate the neutron attenuation of blank and biochar-reinforced concrete exposed to high energy neutrons. We find that the shielding performance of concrete with 15% biochar is comparable with commonly used materials such as Boron Carbide at 20% and exceeds that of Basalt fibers with the same concentration, making these composites an interesting greener alternative to current solutions. A combination of biochar and heavier fillers also show extremely promising performance.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2062-2066
• /
• 2022

Nuclear energy sources are indispensable in cost effectively achieving carbon neutral economy, where public opinion is critical to adoption as the consequences of nuclear accident can be catastrophic. In this context, discussion on spent nuclear fuel is a prerequisite to expanding nuclear energy, as it leads to the issue of radioactive waste disposal. Given the dearth of study on spent nuclear fuel public acceptance, we use text mining and big data analysis on the news article and public comments data on Naver news portal to identify the Korean public opinion on spent nuclear fuel. We identify that the Korean public is more interested in the nuclear energy policy than spent nuclear fuel itself and that the alternative energy sources affect the position towards spent nuclear fuel. We recommend relating spent nuclear fuel issue with nuclear energy policy and environmental issues of alternative energy sources to further promote spent nuclear fuel.

• Advances in concrete construction
• /
• v.13 no.2
• /
• pp.113-121
• /
• 2022

Polymers, particularly plastics, have been widely seen as an existential risk to the environment due to their contribution to pollution, carbon emissions and climate change. Many argue that it is possible to substantially ease the threat of plastics by engaging the public in reducing their use in day-to-day life and implementing efficient domestic waste management strategies. On the other hand, polymers and plastics in building and construction are considerably less problematic, if not attractive. In fact, the applications of polymers in construction have been continuously expanding. This is partly due to the developments made in this area being implemented within a sustainable development strategy. In this paper, the main applications of polymers in construction have been revisited and an overview of the research topics in each application has been briefly presented.