• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.109-110
• /
• 2013

Medium carbon steel was aluminized by hot dipping into molten Al or Al-1%Si baths. After hot-dipping in these baths, a thin Al-rich topcoat and a thick alloy layer rich in $Al_5Fe_2$ formed on the surface. A small a mount of FeAl and $Al_3Fe$ was incorporated in the alloy layer. Silicon from the Al-1%Si bath was uniformly distributed throughout the entire coating. The hot dipping increased the microhardness of the steel by about 8 times. Heating at $700-1000^{\circ}C$ however decreased the microhardness through interdiffusion between the coating and the substrate. The oxidation at $700-1000^{\circ}C$ in air formed a thin protective ${\alpha}-Al_2O_3$ layer, which provided good oxidation resistance. Silicon was oxidized to amorphous silica, exhibiting a glassy oxide surface.

• 공업화학
• /
• 제27권5호
• /
• pp.472-477
• /
• 2016

본 연구에서는 전류밀도 변화에 따른 탄소섬유의 양극산화 처리가 탄소섬유 표면과 탄소섬유 강화 복합재료의 기계적 계면결합력에 미치는 영향을 고찰하였다. 양극산화 처리된 탄소섬유 표면 특성은 원자간력 현미경(Atomic force microscope, AFM)과 전계방사형 주사전자현미경(Field emission-scanning electron microscope, FE-SEM), 적외선 분광법(Fourier transform infrared spectroscopy, FT-IR) 및 X선 광전자 분광법(X-ray Photoelectron Spectroscopy, XPS)으로 분석하였으며, Short beam 전단시험을 통해 표면처리에 따른 탄소섬유 강화 복합재료의 계면 전단강도를 측정하였다. 실험 결과 전류밀도가 증가함에 따라 탄소섬유 표면의 거칠기와 산소관능기의 함량의 증가와, 탄소섬유 강화 복합재료의 층간전단강도(Interlaminar shear strength, ILSS)의 향상 및 페놀릭 하이드록실 그룹과의 비례관계를 확인하였다. CF-2.0 시편의 층간전단강도는 87.9 MPa로 CF-AS 시편에 비해 약 4% 증가하였는데, 이러한 결과는 양극산화 처리가 산소관능기와 탄소섬유 표면 거칠기의 증가를 유도하여 탄소섬유와 수지의 계면 결합력이 증가된 것으로 판단된다. 그중 층간전단강도와 비례관계인 페놀릭 하이드록실 그룹은 탄소섬유 강화 복합재료의 계면결합력을 향상시키는 중요한 요소라 판단된다.

• Carbon letters
• /
• 제2권1호
• /
• pp.27-36
• /
• 2001

The pack-cementation process is the method which is formed SiC coating layer to improve weak oxidation properties of CFRCs (carbon fiber-reinforced carbons). This method develops the anti-oxidation coating layer having no dimensional changes and good wetting properties. In this study to improve the oxidative resistance of the prepared 4D CFRCs, the surface of CFRCs is coated by SiC using pack cementation method. The mechanical properties of SiC-coated 4D CFRCs are measured by the 3-point bending test, and their ablation properties are investigated by the arc torch plasma test. From the results, it is found that both mechanical and ablation properties of SiC-coated 4D CFRCs are much better than bare CFRCs.

• Carbon letters
• /
• 제14권1호
• /
• pp.55-57
• /
• 2013

The development of hollow carbon balls by $CO_2$ oxidation of two types of carbon blacks was studied. Super P (SP) and Denka Black (DB) were used for this study. Specific surface area (SSA), structural parameters, and microstructures were examined using Brunauer, Emmett and Teller apparatus, X-ray diffraction spectroscopy, and transmission electron microscope (TEM), respectively. The SSAs of both oxidized carbon blacks increased after oxidation. The SSAs of raw DB and SP were 73 $m^2/g$ and 60 $m^2/g$, respectively. Maximum SSAs of oxidized DB and SP were 152 $m^2/g$ and 253 $m^2/g$, respectively. The $d_{002}$ of DB and SP showed almost no change after oxidation. The Lc of raw DB ($38{\AA}$) and SP ($19{\AA}$) increased with increasing weight loss. The $L_c$ of SP increased up to $254{\AA}$ at 96% weight loss. The SSA increased about twice in DB (148 $m^2/g$) and about four times in SP (254 $m^2/g$) after 3 h oxidation compared with the original carbon blacks. Through TEM observation the outer parts of the oxidized carbon blacks showed a rigid shell structure and the inner parts looked empty. Generally it looked like an angular soccer ball, so we named it 'hollow carbon ball'. It is expected that the hollow carbon ball can be used as catalyst supports.

• 전기화학회지
• /
• 제17권3호
• /
• pp.179-186
• /
• 2014

Methanol electro oxidation on the surface of carbon paste modified by $NiCl_2/6H_2O$ was studied in 1M NaOH by potentiostatic and potentiodynamic methods. Ni/C catalyst by the concentration of 5% Ni showed about twice higher electro catalytic activity than Ni metal. The amount of monolayer's on the surface of electrode is almost one order higher for Ni/C than Ni electrode. The kinetic parameters and the diffusion coefficient of methanol were derived from chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) measurements.

• Carbon letters
• /
• 제12권1호
• /
• pp.1-7
• /
• 2011

In the present study, the removal of Pb (II) ions on oxidized activated carbons (ACs) was investigated. ACs were derived from activation of indigenous cotton stalks waste with potassium hydroxide (KOH) in two-stage process. The KOH-ACs were subjected to liquid-phase oxidation with hot $HNO_3$ and one untreated sample was included for comparison. The obtained carbons were characterized by Fourier transform infrared (FTIR), slurry pH and $N_2$-adsorption at 77 K, respectively. Adsorption capacity of Pb (II) ions on the resultant carbons was determined by batch equilibrium experiments. The experimental results indicated that the oxidation with nitric acid was associated with a significant increase in mass of yield as well as a remarkable reduction in internal porosity as compared to the untreated carbon. The AC-800N revealed higher adsorption capacity than that of AC-800, although the former sample exhibited low surface area and micropore volume. It was observed that the adsorption capacity enhancement attributed to pore widening, the generation of oxygen functional groups and potassium containing compounds leading to cation-exchange on the carbon surface. These results show that the oxidized carbons represented prospective adsorbents for enhancing the removal of heavy metals from wastewater.

• Carbon letters
• /
• 제1권1호
• /
• pp.17-21
• /
• 2000

Catalytic reduction and oxidation of NO over polyacrylonitrile based activated carbon fibers (PAN-ACF) under various conditions were carried out to develop removal process of NO from the flue gas. The effect of temperature, oxygen concentration and the moisture content for the reduction of NO with ammonia as a reducing agent was investigated. The reduction of NO increased with the oxygen concentration, but decreased with the increased temperature. The moisture content in the flue gas affects the reduction of NO as the inhibition of the adsorption of the other components and the reaction on the surface of ACE For the oxidation of NO to $NO_2$ over PAN-ACF without using a reducing gas, it showed the temperature and the oxygen concentration of the flue gas are the important factors for the NO conversion in which the conversion increased with oxygen concentration and decreased with the temperature increase and might be the alternative option for the selective catalytic reduction process.

• 폴리머
• /
• 제24권4호
• /
• pp.499-504
• /
• 2000

고강도 PAN계 탄소섬유를 양극산화하여 섬유의 표면 관능기와 표면 자유에너지, 그리고 최종 복합재료의 기계적 특성 향상에 미치는 영향을 고찰하였다. FT-IR과 XPS 측정 결과, 양극산화에 의해 형성된 섬유 표면의 산소 관능기는 섬유의 표면 에너지와 복합재료의 층간 전단강도 (ILSS)에 큰 영향을 주는 것으로 나타났다. 그리고 젖음액의 wicking rate에 근거한 접촉각 측정에서 탄소섬유의 양극산화는 표면 자유에너지의 극성 요소를 크게 증가시키며, 이것은 표면 에너지 관점에서 살펴볼 때 좋은 젖음성이 최종 복합재료의 섬유와 에폭시 수지 매트릭스사이의 계면결합력 향상에 중요한 역할을 하는 것으로 나타났다. 또한 본 연구에서는 섬유 표면의 $O_{1s}$ $C_{11}$ ratio 또는 극성 요소와 복합재료의 ILSS사이에서 직선적인 상관관계를 나타낼 수 있었다.다.

• 한국대기환경학회지
• /
• 제3권1호
• /
• pp.41-46
• /
• 1987

Adsorption and reaction studies were made for the catalytic oxidation in aqueous slurries of activated carbon at room temperature and atmospheric pressure. In order to analyze the reaction rate, the mechanism was assumed by the steps of nonhomogeneous catalytic reaction. The experimental result show that oxidation rate was controlled by the reaction between adsorbed molecular oxygen and sulfur dioxide on the catalyst surface. Ar room temperature, the equat5ion of reaction rate was given as $ro_2 = 2.49 \times 10^{-7} P_O_2^{0.604}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.459-462
• /
• 2006

Formic acid recently attracted attention as an alternative fuel for direct liquid fuel cells(DLFCs) due to its high theoretical open circuit voltage(1.45V). In this paper, a novel chemical strategy is described for the preparation and characterization of carbon-supported and surface-alloys, which were prepared by using a successive reduction process. After preparing Au colloid nanoparticles, the deposition of Au colloid nanoparticles occurred spontaneously in the carbon black-dispersed aqueous solution. Then nano-scaled Pt layer were formed on the surface of carbon-supported Au nanoparticles. The Au-Pt[x] showed the higher electrocatalytic activity than those of the particle-alloys and commercial one (Johnson-Matthey) for the reaction of formic acid oxidation when the mass-specific currents were compared. The increased electrocatalytic activity might be attributed to the effective surface structure of surface-alloys, which have a high utilization of active materials for the surface reaction of electrode.