• 한국표면공학회지
• /
• 제41권3호
• /
• pp.114-120
• /
• 2008

The pyrolysized carbon xerogel and aerogels were prepared from the sol-gel polymerization of resorcinol-formaldehyde(RF) followed by the dry process under ambient pressure and supercritical carbon dioxide condition respectively. The thermal behaviour of RF polymer xerogel was investigated with TGA analyzer to correspond with the pyrolysis process. The surface properties such as particle size, morphology and the point of zero charge of the pyrolysized porous carbon aerogels were studied for the precious metal catalyst supported media. It was found that the volume of the polymer aerogel decreased because of the significant linear shrinkage and weight loss of polymer gel during the carbonization. The point of zero charge of the carbon aerogel pyrolysized at $1050^{\circ}C$ under inert gas flow was about 10.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.554-559
• /
• 2011

리튬금속을 음전극으로 사용할 때의 안전성과 전극 특성을 개선하기 위해, 리튬금속 표면에 각기 종류가 다른 3가지의 탄소분말을 리튬금속 표면에 물리적으로 코팅한 전극을 제조하고 이를 리튬 2차전지의 음전극으로 채택하여 충방전 특성을 조사하였다. 일차입자의 입경이 작고 비표면적이 큰 탄소분말로 코팅한 음전극을 채택하는 경우가 충진밀도가 높고 표면 거칠기가 낮으며, 충방전 특성도 우수하게 나타났다. 이러한 탄소분말 코팅 효과는 소형 셀일수록 더욱 유리하게 나타났다.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.128-133
• /
• 2000

In this work, soft carbons produced by pyrolysis of petroleum and coal-tar pitch were used as the negative electrode for Li-ion batteries. We studeid the charge/discharge capacity and the interfacial reaction of these electrodes by constructing a half cell. Charge/discharge property was studied by a constant-current step and the interfacial reaction between the electrolyte and the surface of a carbon electrode was studied by the cyclic voltammetry. The initial charge/discharge capacity for the coal-tar pitch carbon increased exceedingly with the heat treatment temperature. On hte other hand, the capacity of the petroleum pitch carbon increased with temperature up to 1000$^{\circ}C$, thereafter decreased continuously. While the charge capacity decreased with the cycle number, the reversibility increased above 90%. In addition, the thermal stability and crystallization of petroleum and coal-tar pitches were analyzed by TGA and XRD, respectively.

• Carbon letters
• /
• 제7권2호
• /
• pp.97-104
• /
• 2006

The influence of carbon surface area, carbon-oxygen groups associated with the carbon surface and the solution pH on the adsorption of Pb(II) ions from aqueous solutions has been studied using three activated carbons. The adsorption isotherms are Type I of BET classification and the data obeys Langmuir adsorption equation. The BET surface area has little effect on the adsorption while it is strongly influenced by the presence of acidic carbon oxygen surface groups. The amount of these surface groups was enhanced by oxidation of the carbons with different oxidizing agents and reduced by eliminating these groups on degassing at different temperatures. The adsorption of Pb(II) ions increases on each oxidation and decreases on degassing the oxidized carbons. The increase in adsorption on oxidation has been attributed to the formation of acidic carbon-oxygen surface groups and the decrease to the elimination of these acidic surface groups on degassing. The adsorption is also influenced by the pH of the aqueous solution. The adsorption is only small at pH values lower than 3 but is considerably larger at higher pH values. Suitable mechanisms consistent with the adsorption data have been suggested.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.26-31
• /
• 2007

Nanocomposite resin(PUD-CNT) composed of Carbon nanotube(CNT) and Polyurethane Dispersion (PUD) was prepared by different contents of CNT($0{\sim}5%$). PUD-CNT was coated on samples, and their electrical conductivity was investigated. With increasing CNT content, static change, half life and surface resistance decreased. Composites having 5% CNT showed $10^9{\Omega}/cm$(surface resistance), and 40V (stactic charge). Respectively, From this results, PUD-CNT can be used as a antistatic material.

• 한국환경과학회지
• /
• 제7권3호
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.403-408
• /
• 2000

On the basis of theory of Bratsch's electronegativity equalization the electronegativity equalization the group electronegativities and the group partial charges for cationic and amphoteric surface and amphoteric surfactants could be calculated using Pauling's electronegativity parameters. From calculated output we have investigated relationships between CMC(critical micelle concentration) and partial charge and group electronegativity of hydrophilic and hydrophobic groups structural stability of micelle for cationic and amphoteric surfactants. As a result CMC depends upon partial charge and electronegativity of hydrophilic group is decreased. With increasing the carbon number of hydrophilic group for cationic surfactant its partial charge is increased but CMC and its electronegativity are decreased. With increasing the carbon number of hydrophobic group for cationic and amphoteric surfactant its partial charge is increased but CMC andits electronegativity are decreased.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1137-1144
• /
• 2013

$TiO_2$ composites with seven different carbon materials (activated carbons, graphite, carbon fibers, single-walled carbon nanotubes, multi-walled carbon nanotubes, graphene oxides, and reduced graphene oxides) that are virgin or treated with nitric acid are prepared through an evaporation method. The photocatalytic activities of the as-prepared samples are evaluated in terms of $H_2$ production from aqueous methanol solution (photo-catalytic reduction: PCR) and degradation of aqueous pollutants (phenol, methylene blue, and rhodamine B) (photocatalytic oxidation: PCO) under AM 1.5-light irradiation. Despite varying effects depending on the kinds of carbon materials and their surface treatment, composites typically show enhanced PCR activity with maximum 50 times higher $H_2$ production as compared to bare $TiO_2$. Conversely, the carbon-induced synergy effects on PCO activities are insignificant for all three substrates. Colorimetric quantification of hydroxyl radicals supports the absence of carbon effects. However, platinum deposition on the binary composites displays the enhanced effect on both PCR and PCO reactions. These differing effects of carbon materials on PCR and PCO reactions of $TiO_2$ are discussed in terms of physicochemical properties of carbon materials, coupling states of $TiO_2$/carbon composites, interfacial charge transfers. Various surface characterizations of composites (UV-Vis diffuse reflectance, SEM, FTIR, surface area, electrical conductivity, and photoluminescence) are performed to gain insight on their photocatalytic redox behaviors.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.225-231
• /
• 2011

The electrochemical characteristics of electric double layer capacitor(EDLC) were investigated using various carbon materials. The physical properties such as specific surface area and mean pore size of activated carbon were analyzed by BET. The results of the activated carbon used for electrode material showed that the specific surface areas varied from 600 to 1500 $m^2$/g and mean pore sizes from 1.74 to 2.88 nm. A maximum specific capacitance of 0.30 F/$cm^2$ was obtained for the activated carbon with the highest specific surface area and ionic conductivity. Also, it was found that the electrochemical results of the cyclic charge-discharge tests were stable.

• Carbon letters
• /
• 제3권1호
• /
• pp.17-24
• /
• 2002

The electrochemical behavior of the $LiCoO_2$ electrode, containing carbon black as a conductor, depends upon the nature and characteristics of carbon black. In this study, six different kinds of carbon blacks were employed to investigate the relationship between the properties of carbon blacks and electrochemical characteristics of the electrode. The larger amount of surface oxygen functional groups brought the lower electrical conductivity for the carbon blacks. The electrical conductivity of carbon blacks was closely related to the impurities such as ash and volatile content. The rate capability and cyclability of the electrode were improved with the higher conductivity of carbon blacks used. So, it can be concluded that high conductive carbon black plays an important role as a conductor for high rate of charge-discharge capability and initial efficiency.