• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.947-953
• /
• 2012

In this study we investigated the manufacturing method for the activated carbon using the char from the pyrolysis of waste tire. The physical activation method using the steam in the fixed-bed quartz reactor was used for preparation of activated carbon. The primary experiment parameters are the activation temperature, activation time, heating rate, and the injection quantity of active agent. From the results of pore distribution of activated carbon, the micropore which was made in $850^{\circ}C$ of activation temperature, $5^{\circ}C$/min of heating rate, and 3 hours of activation time was developed in biggest quantity, and mesopore and macropore were developed in the biggest quantity too. The optimum conditions for producing the activated carbon using the pyrolysis residue were $850^{\circ}C$ of activation temperature, 3 hours of activation time, $5^{\circ}C$/min of heating rate, and 3 g $H_2O/char-g{\cdot}hr$ of active agent through this study. The produced activated carbon in these conditions showed that the potentiality of utilization as activated carbon because the BET specific surface area was $517.6m^2/g$ and total pore volume was $0.648cm^3/g$.

• Journal of Hydrogen and New Energy
• /
• v.16 no.3
• /
• pp.209-218
• /
• 2005

To find a suitable metal component in oxygen carrier particles for chemical-looping hydrogen generation system(CLH), oxygen transfer capacities of metal components were compared and Ni has been selected as the best metal component. The proper operating conditions to achieve high hydrogen generation rate have been investigated based on the chemical-equilibrium composition analysis for water splitting reactor. Moreover, suitable compositions of syngas from gasifier of heavy residue to achieve high energy efficiency have been investigated by calculation of heat of reaction. Based on the selected operating conditions, the best configuration of two interconnected fluidized beds system for the chemical-looping hydrogen generator has been investigated as well.

• Mycobiology
• /
• v.45 no.1
• /
• pp.52-56
• /
• 2017

In this study, we report the manganese peroxidase production ability from a Fusarium sp. strain using an inexpensive medium of agriculture residues of either rice straw or wood chips as carbon source. The highest manganese peroxidase activity on rice straw medium and on wood chips was 1.76 U/mL by day 9 and 1.91 U/mL by day 12, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.386-389
• /
• 2003

Organic solvent tolerance bacteria, Pseudomonas savastanoi BCNU 106 could utilize a high contentration of benzene, toluene, ethylbenzene, xylene isomers (BTEX) as a sole carbon source. It was founded that strain BCNU 106 transformed o-xylene to 2-methylbenzyl alcohol, 2-methylbenzoic acid through direct oxygenation of methyl residue on GC-MS analysis.

• Environmental Engineering Research
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2017

One of the most threatening consequences of eutrophic freshwater reservoirs is algal blooming which typically occur after the long a mega drought or/and irregular rainfall under influence of climate change. The long-term experiences of chemical treatment are known as a most practical effort to reduce health concerns from human exposure of harmful cyanobacteria as well as to preserve ultimate freshwater resources. Even though these conventional chemical treatment methods do not completely solve the algal residue problem in water treatment plant or directly in the water bodies, they still have big advantages as fast and efficient removal process of cyanobacteria due to cheaper, easier to manage. This review summarizes their chemical treatment scenarios of the representative coagulants, pre-oxidants and algaecides composed to chemical compounds which immediately may help to manage severe cyanobacteria blooms in the summer seasons.

• Journal of Food Hygiene and Safety
• /
• v.11 no.2
• /
• pp.89-97
• /
• 1996

This study was carried out to determine the pesticide residues in rice bran, crude rice bran oil and the oil of various stages of refining process. Each samples were analyzed for 41 pesticide residues by multiclass multiresidue methods with GC-ECD, NPD and identified by GC-MSD. Rice bran were detected cypermethrin, diazinon, dichlofluanid, and its level were ranged from 0.01~0.122 ppm. Crude rice bran oil were detected cypermethrin, diazinon, dichlofluanid, dimethoate, etrimfos, flucythrinate, and its level were ranged from 0.015~0.654 ppm Crude rice bran oil has the higher level of pesticide residues and more varieties of pesticides than rice bran. But pesticide residues in the crude rice bran oil was found to be almost removed then pigment was decolorized by absorption using active carbon and clealy removed by thermolysis for deodorization.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.325-331
• /
• 1994

Organic extracts of diesel- exhaust particulates were analyzed for mutagenicity using Ames Salmonella typhimurium assay system. An experimental diesel microbus used was drived on the chassis dynamometer according to CVS-75 mode. The samples were taken from the mixed gases in a dilution tunnel. With a high-volume air sampler equipped with double filter holders, particulate matters were collected on a teflon-coated glass fiber filter placed behind a activated carbon filter. After ultrasonic extraction with benzene- ethanol and evaporation to dryness, the residue was dissolved in dimethylsulfoxide. Each sample was tested toward 2 strains, TA100 and TA98 by the pre-incubation method in the absence and presence of S-9mix. Average concentration of diesel- exhaust particulates was about 116.6mg/m$^3$, and 44.1~62.2 ％ to the total weight of particulates, consisted of organic matters. The mutagenicities of diesel- exhaust particulate organic matters were 4,512 and 2,205 revertants/m$^3$ toward TA100 without and with S-9mix, respectively. Those toward TA98 were 13,367 and 3,715 revertants/m$^3$, respectively.

• Journal of Hydrogen and New Energy
• /
• v.28 no.5
• /
• pp.577-583
• /
• 2017

A series of microwave waste tire pyrolysis experiments were conducted using a lab-scale batch reactor to delineate the effects of microwave ouput power on the pyrolysis behavior of waste tire. As results of experiments, it was found that as the microwave output power was increased from 1.22 kW/kg to 2.26 kW/kg, the reaction temperature and oil yield increased significantly and the required time and microwave power consumption decreased remarkably, respectively. With increased power consumption, the content of the fixed carbon of pyrolysis residue increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.446-446
• /
• 2010

탄소나노튜브(CNT, carbon nanotube)를 에미터 재료로 사용하여 전계방출 디스플레이 (FED, field emission display)용 캐소드(cathode)를 제작할 때 CNT paste를 구성하는 유기성 바인더를 제거하기 위한 열처리 공정은 필수적이며, 이후에 CNT의 돌출을 위한 표면처리 공정이 뒤따르게 된다. 이러한 표면처리에는 여러 가지 방법들이 있으며 캐소드 제작시 매우 중요한 부분이다. 그 이유는 열처리 과정을 거치게 되면 이물질들이 CNT를 감싸게 되는데 이는 전계방출을 방해하는 요소가 되기 때문에 이를 효과적으로 제거해주지 않으면 전계방출의 효율성이 떨어지기 때문이다. 본 연구는 스크린 인쇄법으로 제작한 CNT 캐소드의 표면처리에 관한 것으로 Tpae 방법을 이용하여 1차적으로 표면처리를 수행한 후 2차적으로 재열처리법을 이용하여 열처리 후 CNT를 감싸고 있는 이물질(ash, residue)등을 효과적으로 제거하였는지 전계방출 특성을 통하여 알아보았다.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.3
• /
• pp.101-104
• /
• 1980

A sequential copolypeptide with repeating unit sequences, in which a glycyl residue is flanked progressively by two ${\gamma}$-benzyl-L-glutamyl residues, has been synthesized by poymerizing p-nitrophenyl ester of ${\gamma}$-benzyl-L-glutamyl-${\gamma}$ -benzyl-L-gutamyl-glycine. Polymers obtained were characterized by viscosity and infra-red spectral data. The highest molecular weight obtained was 21,000. Molecular conformation in solid state was found to be a mixed form of and |${\beta}$-structure. Polymers obtained were insoluble in the most of the organic solvents except in a strong acid like dichloroacetic acid, but in binary mixtures of solvents such as dichloroacetic acid-ethylene dichloride or dichloroacetic acid-chloroform, they were soluble within certain ranges of solvent compositions.