• 환경영향평가
• /
• 제8권4호
• /
• pp.59-72
• /
• 1999

The purpose of the study is to propose the concrete and realistic alternative measures for $CO_2$ emission reduction on commercial sector. To achieve the purpose, this study adopted AIM/KOREA simulation model modified from AIM(Asia-Pacific Integrated Model) originally developed by Japan National Environmental Research Institute. The results of simulation demonstrate that the $CO_2$ emission from the commercial sector in 1995 was estimated 864 million TC(tons of carbon); however, according to the base scenario, $CO_2$ emission in 2020 is expected to be increased to 1,872 million TC, which is 2.17 times greater than that in 1995. In order to mitigate the ever-increasing $CO_2$ emission, the results of AIM/KOREA simulations under various scenarios showed that the 30-thousand-won carbon tax scenario does not successfully motivate the selection of advanced technology; however, with the 300-thousand-won carbon tax, a substantial amount of $CO_2$ emission reduction by 1.69 million TC from the BaU((Business-as-Usual)scenario is expected to be achieved by year 2020. Such substantial reduction of $CO_2$ emission under the 300-thoudsand-won carbon tax scenario is due to the introduction of advanced technology, such as use of condensing boilers, forced by heavier carbon tax. Under the scenario that presumes the maximum introduction of gas-burning industrial appliances, an 2.66 million TC of $CO_2$ reduction was expected. The results of this study suggest that the $CO_2$ emission reduction measures can be interpreted in many different views. However, if people and industries are fully aware of the economic benefit of energy saving, a certain level of $CO_2$ reduction by a successful introduction of advanced energy saving technology appears to be achieved without carbon tax or subsidies.

• 자원리싸이클링
• /
• 제31권3호
• /
• pp.40-52
• /
• 2022

탄소광물화 기술은 석탄재와 이산화탄소를 반응시켜 건설재료 등으로 활용이 가능한 복합탄산염 등의 부산물을 생산함과 동시에 이산화탄소를 탄산염에 고정화하여 온실가스 감축효과를 얻을 수 있는 기술로, 이산화탄소 감축 및 경제적 잠재력을 고려하면 국가 온실가스 감축 목표를 실현하기 위한 유용한 방안이 될 수 있다. 그러나 아직까지는 해당 기술의 이산화탄소 감축 성능과 환경적인 이점, 경제성 등에 대한 자료가 적어서 기술의 상용화 가능성에 대해서는 명확하지 않은 상태이다. 본 연구는 국내 순환유동층 발전소에서 발생되는 이산화탄소와 석탄재를 이용하는 이산화탄소 투입량 기준 6,000 tonCO₂/년 규모의 탄소광물화 설비에 대해 이산화탄소 감축량 및 경제성 분석을 수행했다. 공정 분석 결과 1톤의 복합탄산염 생산 시 실질적인 이산화탄소 감축량은 약 45.8 kgCO₂eq, 연간 약 805.3 tonCO₂로 산정되었으며, 경제적 편익 분석 시 비용편익분석비(B/C Ratio)는 1.04, 내부수익률(IRR)은 10.65 %, 순현재가치(NPV)는 24,713,465 원으로 나타나, 탄소광물화 설비가 어느 정도 경제성을 확보하고 있는 것으로 분석되었다.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.754-760
• /
• 1998

It was found that the adsorption of a cobalt(III) complex with a macrocyclic ligand, C-meso-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (hmc), was induced on a glassy carbon electrode by heavily oxidizing the electrode surface. Adsorption properties are discussed. The glassy carbon electrode with the adsorbed complex was employed to see the catalytic activities for the electro-reduction of O2. In the presence of oxygen, reduction of (hmc)Co3+ showed two cathodic waves in cyclic voltammetry. Compared to the edge plane graphite electrode at which two cathodic waves were also observed in a previous study, catalytic reduction of O2 occurred in the potential region of the first wave while it happened in the second wave region with the other electrode. A rotating disk electrode after the same treatment was employed to study the mechanism of the O2 reduction and two-electron reduction of O2 was observed. The difference from the previous results was explained by the different reactivity of the (hmc)CoOOH2+ intermediate, which is produced after the two electron reduction of (hmc)Co3+ in the presence of O2.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.202-210
• /
• 2018

This study was carried out to quantify degree of contribution of harvested wood product (HWP) on mitigation of climate change by valuation of public benefits, environmentally and economically. The potential carbon dioxide emission reduction of HWP was estimated by accounting carbon storage effect and substitution effect. Based on 2014 statistics of Korea Forest Service, domestic HWPs were sorted by two categories, such as wood products produced domestically from domestic and imported roundwood. The wood products were divided into seven items; sawnwood, plywood, particle board, fiberboard (MDF), paper (including pulp), biomass (wood pellet) and other products. The carbon stock of wood products and substitution effects during manufacturing process was evaluated by items. Based on the relevant carbon emission factor and life cycle analysis, the amount of carbon dioxide emission per unit volume on HWP was quantified. The amounts of carbon stock of HWP produced from domestic and from imported roundwood were 3.8 million $tCO_{2eq}$., and 2.6 million $tCO_{2eq}$., respectively. Also, each reduction of carbon emission by substitution effect of HWP produced from domestic and imported roundwood was 3.1 million $tCO_{2eq}$. and 2.1 million $tCO_{2eq}$., respectively. The results of this study, the amount of carbon emission reduction of HWP, can be effectively used as a basic data for promotion of wood utilization to revise and establish new wood utilization promotion policy such as 'forest carbon offset scheme', and 'carbon storage labeling system of HWP'.

• 무역상무연구
• /
• 제58권
• /
• pp.329-351
• /
• 2013

Since the Kyoto Protocol was released in 2005, there has been a number of mechanisms about funding and how to allocate the burdens. The UNFCCC(United Nations Framework Convention on Climate Change)have discussed establishing an international fund to support the reduction of a greenhouse gas. As the availability of adaption finance for developing countries increase, it's needed for a way of prioritizing countries. This article analyzes the carbon reduction system that includes a emission trading scheme, a carbon tax and examines GCF(Green Climate Fund)'s role and needs. A solution to finance Green Climate Fund is more preferred a harmonized carbon tax that across all nations with carbon tax. Especially the role of industrialized countries is important that based on their historical responsibility for fossil fuel emission. That is, they should get more shares of the global costs than developing countries.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.217-222
• /
• 2015

Carbon-nickel nanocomposites were prepared by the reaction of fullerene ($C_{60}$) and nickel hydroxide in an electric furnace at $700^{\circ}C$ for 2 h. The hybrid carbon-nickel nanocomposites were characterized by X-ray diffraction, Raman spectroscopy, and scanning electron microscopy. The kinetics and catalytic activity of the carbon-nickel nanocomposites in the reduction of 4-nitrophenol were confirmed by UV-vis spectroscopy.

• 한국환경과학회지
• /
• 제30권10호
• /
• pp.863-877
• /
• 2021

While there a growing interest in Voluntary Carbon Disclosure (VCD), comparatively little is discussed whether the improved quality of voluntary carbon disclosure can lead to subsequent changes in a company's carbon reduction performance. Drawing on companies under the Korean Emission Trading Scheme (ETS) with the contents analysis of their sustainable reports, the present research seeks to address the existing knowledge gaps in the current literature on environmental disclosure. Findings empirically show that an increase in the voluntary carbon disclosure score is positively transformed into changes in carbon performance and further develop that the effect of voluntary carbon disclosure on carbon performance varies depending on changes in management capability with the moderation effect.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 추계학술발표회요약집
• /
• pp.257.2-257
• /
• 2001

• 자원리싸이클링
• /
• 제26권4호
• /
• pp.19-25
• /
• 2017

금속실리콘을 제조하는 방법에는 탄소환원법, 플라즈마환원법, 테르밋반응 등이 있다. 상업용 금속실리콘을 대량 생산하는 방법으로 탄소환원법에 의한 아크전기로가 일반적으로 많이 사용되고 있다. 아크전기로를 이용한 생산시스템이 극복해야 할 문제로는 제조원가 중 전력비 비율이 30%를 차지할 정도로 높은 전기에너지 비용과 환경방지 시설구축 및 유지관리비용이다. 이러한 이유로 국내에서는 아직 아크전기로를 이용한 생산시스템이 상용화 제조시스템으로 구축되지 못하고 있다. 기업 및 연구기관에서 탄소환원법의 아크전기로를 이용하여 최적 생산시스템을 연구하고 있다. 세 가지 유형의 이산화규소를 테르밋반응을 통하여 순도변화를 알 수 있었다. 그리고 실험분석에서 테르밋반응을 사용하여 이산화규소 순도로 금속실리콘 순도 변화를 분석하였다. 이산화규소 순도와 금속실리콘 순도는 밀접한 관계가 있음을 알 수 있었다.

• 한국환경과학회지
• /
• 제5권5호
• /
• pp.677-682
• /
• 1996

페로브스카이트 ($La_{0.9}$$Sr_{0.1}$$CuO_3$) 전극을 이용하여 이산화탄소를 메탄올, 에탄올등의 알콜류와 아세트 알데히드로 전해환원하였다. 전해환원 실험은 전류밀도 100mA/c$m^2$ 그리고 환원 전위 -2 to -2.5 V vs. Ag/AgCl에서 수행하였다. 실험결과 메탄올은 11.6%, 에탄올은 15.3% 그리고 아세트알데히드는 6.2 %의 최고효율을 나타내었다. 따라서 페로브스카이트 전극은 알콜생성 면에서 기타 다른 금속전극에 비하여 매우 우수한 효과를 보여주었다.