• Journal of Korean Society of Rural Planning
• /
• v.26 no.2
• /
• pp.61-70
• /
• 2020

The purpose of this study is to calculate the annual carbon reduction of crops according to the carbon fixation method of agricultural land, therefore to analyze whether the economic inducement of farmers to switch from single cropping to double cropping if the amount of carbon reduction were traded on the Korea Exchange. The analysis targets were Gyeonggi Province, which was divided into four areas to compare the difference between agricultural income and carbon income by crop and cropping system. Agricultural profit was estimated by multiplying the prior data of 2012 by the change rate of the consumer price index, and carbon income was calculated through the carbon reduction for each crop and the average transaction price of KAU19 traded on the Korea Exchange. According to the analysis, the profit rate of double cropping in all areas is -110.4% to 23% compared to single cropping, when only agricultural profit is taken into account, with no economic inducement for farmers to change the cropping system. However, when carbon income is taken into account together, the profit rate of double cropping rises significantly from 122.5% to 238.9% over a single operation in all areas, resulting in an economic inducement to switch the cropping system. This research is meaningful in that farming households could raise their income by additional carbon income, and that carbon credits could be supplied at Korea Exchange to further boost the carbon emission exchange.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.141-147
• /
• 2012

A direct injection diesel engine with large amount of exhaust gas recirculation was used to investigate low temperature diesel combustion. Pilot injection strategy was adopted in low temperature diesel combustion to reduce high carbon monoxide and hydrocarbon emissions. Combustion characteristics and exhaust emissions of low temperature diesel combustion under different pilot injection timings, pilot injection quantities and injection pressures were analyzed. Retarding pilot injection timing, increasing pilot injection quantity and higher injection pressure advanced main combustion timing and increased peak heat release rate of main combustion. As a result of these strategies, carbon monoxide and hydrocarbon emissions were reduced. Soot emission was slightly increased with retarded pilot injection timing while the effect of pilot injection on nitrogen oxides emission was negligible under low combustion temperature condition. Spatial distribution of fuel from the spray targeting visualization was also investigated to provide more insight into the reason for the reduction in carbon monoxide and hydrocarbon emissions.

• Carbon letters
• /
• v.14 no.4
• /
• pp.255-258
• /
• 2013

Flexible transparent conducting films (TCFs) were fabricated by dip-coating single-wall carbon nanotubes (SWCNTs) onto a flexible polyethylene terephthalate (PET) film. The amount of coated SWCNTs was controlled simply by dipping number. Because the performance of SWCNT-based TCFs is influenced by both electrical conductance and optical transmittance, we evaluated the film performance by introducing a film property factor using both the number of interconnected SWCNT bundles at intersection points, and the coverage of SWCNTs on the PET substrate, in field emission scanning electron microscopic images. The microscopic film property factor was in an excellent agreement with the macroscopic one determined from electrical conductance and optical transmittance measurements, especially for a small number of dippings. Therefore, the most crucial factor governing the performance of the SWCNT-based TCFs is a SWCNT-network structure with a large number of intersection points for a minimum amount of deposited SWCNTs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.3
• /
• pp.260-265
• /
• 2008

As one of renewable energy sources, biomass is playing a major role in reducing the greenhouse gas emission in the UK. The country currently produces about 4.5% (18.1TWh in 2006) of the total electricity generation from renewables, where biomass-based sources accounts for 50% of the amount and the remainder mostly from hydro and windpower. In 2007, the UK government has announced its new energy policy through the Energy White Paper, which includes an ambitious national target of 60% cuts in carbon emission by 2050. Complementary strategic plans in key renewable energy technologies accompanied the Energy White Paper, including biomass strategy, waste strategy and low carbon transportation strategy. This paper summarizes the current status and policy of UK for renewable energy production with focus on the use of biomass and bioenergy.

• Korean Journal of Organic Agriculture
• /
• v.8 no.2
• /
• pp.97-110
• /
• 2000

An organic agriculture should be managed by mixed farming in farm unit as a closed recycling system. Due to restricted purchased of fertilizers from outside, organic farmer has to deal with limited amount of nutrient source in farm unit. Especially the supply of the essential nutrient, nitrogen, mostly depends on legumes fixing nitrogen optimizing the site-adapted crop rotation. Dynamics of humus and metabolic plant carbon and active soil carbon compartment in active and passive humuspool by rotation system was explained, and dynamics of potentially mineralizable nitrogen in organic nitrogen and biomass was discussed. It was also discussed comparison of ammonia emission, potential greenhouse effect, primary energy input, acidification potential, CO2 emission between organic and conventional farming, the nitrate-nitrogen dynamic in the soil profile by organic, integrated and conventional farming system. In conclusion, it was suggested for Korean Organic Agriculture that the importance of legumes and green manures in rotation system for increase/maintenance of soil ferfility, and was pointed out the need of investment for environment impact of Korean organic farming implement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.47-48
• /
• 2022

In Korea, construction and development has been continued rapidly since the 1970s, and the reconstruction and renovation market has recently been activated to improve old buildings. Most of the environmental evaluation of reconstruction and renovation projects is focused on the use of operating energy, and It is necessary to analyze carbon emissions throughout the life cycle for a comprehensive evaluation of reconstruction and remodeling projects. Therefore, this study quantitatively predicted carbon emissions from reconstruction and renovation based on ISO 14040s through case analysis for the purpose of evaluating the carbon emissions of renovated buildings from the perspective of the whole life cycle. In additional, the amount of carbon savings of each was analyzed through comparison with existing building.

• Atmosphere
• /
• v.25 no.1
• /
• pp.85-97
• /
• 2015

This study is to investigate future changes in carbon cycle using the HadGEM2-Carbon Cycle simulations driven by $CO_2$ emissions. For experiment, global carbon budget is integrated from the two (8.5/2.6) representative concentration pathways (RCPs) for the period of 1860~2100 by Hadley Centre Global Environmental Model, version 2, Carbon Cycle (Had-GEM2-CC). From 1985 to 2005, total cumulative $CO_2$ amount of anthropogenic emission prescribed as 156 GtC. The amount matches to the observed estimates (CDIAC) over the same period (136 GtC). As $CO_2$ emissions into the atmosphere increase, the similar increasing tendency is found in the simulated atmospheric $CO_2$ concentration and temperature. Atmospheric $CO_2$ concentration in the simulation is projected to be 430 ppm for RCP 2.6 at the end of the twenty-first century and as high as 931 ppm for RCP 8.5. Simulated global mean temperature is expected to rise by $1.6^{\circ}C$ and $3.5^{\circ}C$ for RCP 2.6 and 8.5, respectively. Land and ocean carbon uptakes also increase in proportion to the $CO_2$ emissions of RCPs. The fractions of the amount of $CO_2$ stored in atmosphere, land, and ocean are different in RCP 8.5 and 2.6. Further study is needed for reducing the simulation uncertainty based on multiple model simulations.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.46-55
• /
• 2013

Recently, there are growing interests on carbon emissions related in climate change which is worldwide emerging important issue. Some research works are now carrying out in order to reduce the carbon emission in pulp and paper industries by the synthesis of precipitated calcium carbonate using the exhaust carbon dioxide from combustion furnace or incinerator. However, for solving the original problems on carbon emission, we need to consider the analysis of basic methodology on $CO_2$ through the process efficiencies. There are two general tools for carbon emissions; one is the greenhouse gas inventory and the other is $LCCO_2$ method which is applied to particular items of raw materials and utilities in unit process. In this study, the carbon emissions in wood-containing printing paper production line were calculated by using $LCCO_2$ method. The general materials and utilities for paper production, such as fibrous materials, chemical additives, electric power, steam, and industrial water were analyzed. As the results, $Na_2SiO_3$ showed the highest loads in carbon emissions, and the total amount of carbon emissions was the highest in electricity. In the production line of printing paper using de-inked pulp and BTMP, as the mixing ratio of DIP was higher, the carbon emissions were decreased because of high use of electric power in TMP process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.65-74
• /
• 2016

This study mainly focuses on urban regeneration project as a countermeasure to resolve climate change issues by analyzing the carbon-reduction effect of Jeonju test-bed cases. First, an urban regeneration project is designed for city, Jeonju by analyzing its environmental problems and potential improvement. Then, carbon emission and reduction amounts are evaluated for different businesses and scenarios. Carbon emission sources are classified according to a standard suggested by IPCC, and the emissions are calculated by various standard methods. The result shows that carbon emission amount in Jeonju test-bed is 102,149 tCO2eq. The fact that 70% of the emission from energy sector originates from buildings implies that urban regeneration projects can concentrate on building portions to effectively reduce carbon emission. It is also projected carbon emission will decrease by 3,826tCo2eq in 2020 compared to 2011, reduction mainly based on overall population and industry shrinkage. When urban regeneration projects are applied to 5 urban sectors (urban environment, land use, green transportation, low carbon energy, and green buildings) total of 10,628tCO2eq is reduced and 4,857tCO2 (=15.47%) when only applied to the green building sector. Moreover, different carbon reduction scenarios are set up to meet each goal of different sectors. The result shows that scenario A, B, and C each has 5%, 11%, and 15% of carbon reduction, respectively. It is recommended to apply scenario B to achieve 11% reduction goal in a long term. Therefore, this research can be a valuable guideline for planning future urban regeneration projects and relative policies by analyzing the present urban issues and suggesting improvement directions.

• Korea Trade Review
• /
• v.47 no.6
• /
• pp.355-375
• /
• 2022

In this study, LCA based on EU PAS 2050 and Product Category Rules (PCR) was conducted for steel products with the highest proportion of Korea's exports to the EU among the carbon border adjustment items that were passed by the EU Parliament in June and applied to imports from 2025. Carbon emissions were calculated by (ISO 14040) analysis. As a result of the analysis, the total emission is 394,000 tons, and when converted to the EU ETS weekly price, it is 39,000.000 euros, which is about 5% of the export amount of 734 million dollars. This is the same effect as a 5% tariff increase. This study applies international standards in calculating the carbon footprint and provides information that is closest to the expected amount to be imposed in the future EU CBAM, providing the effect of enabling exporters to establish trade strategies and international competitiveness measures in advance.