• Journal of Environmental Science International
• /
• v.15 no.12
• /
• pp.1087-1091
• /
• 2006

This paper describes the current spatial patterns of the net primary productivity (NPP) of the terrestrial vegetation and carbon emission (C) in the world due to the burning of fossil fuels in order to clarify the amount of expansion of human activity. The C/NPP value varies spatially from almost zero to several tens of thousand times the local NPP. C/NPP is higher under the condition of extensive human activities due to a high human population density or when the local NPP is extremely low in severe climatic zones. In contrast, the low C/NPP areas are distributed mainly in sparsely populated districts, loading to a low impact of human activity. Although the area where C/NPP is less than 10% accounts for about 70% of the entire land area, one-third of these areas cannot contribute to carbon absorption because of low NPP with a shortage of climatic resources. Since more than half of the areas of the remaining areas are agricultural land and forest ecosystems with high NPP, the possible afforestation area was evaluated to be maximum of $30{\times}10^{6}\;km^{2}$; here only sequestrate carbons that correspond to 2% of the global total NPP are present. These analyses revealed that presently most of the areas where the NPP is high are those exclusively used by humans and that it is difficult for large-scale forest plantations to absorb a substantial amount of the carbon emitted annually by humans.

• Journal of Environmental Impact Assessment
• /
• v.20 no.2
• /
• pp.235-248
• /
• 2011

In this study, we investigated the effect of carbon sequestration and sink on the environmental impact assessment of a Bogeumjari Housing Project. Through the case study, we found that, if the project is implemented, the amount of carbon stock tends to decrease greatly while as the amount of the carbon emission tends to greatly increase. Furthermore, we found that the future land use should be planned in detail in order to maintain the soil carbon stock prior to development. Also, enlargement of undeveloped forest land area would be more efficient than that of newly planted area in terms of carbon sequestration.

• Korean Management Science Review
• /
• v.29 no.2
• /
• pp.157-165
• /
• 2012

This paper researches on the effective and efficient logistics policy for the parcel express company. The paper derives new policy by considering the number of used vehicles, carbon emission amount, delivery completion time, etc. The maximum waiting of delivery is considered as the time limit T day. To verify the effectiveness of the derived policy, the data of 30 days is generated, and it was shown that the derived policy is very effective compared with the conventional one.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.2
• /
• pp.114-121
• /
• 2009

There are increased in using the bio-ethanol, as the carbon neutral attracts many researchers due to a reduction in carbon dioxide spotted as the global warming gas. A gasoline engine with 100% of the bioethanol was developed and used in Brazil already, but researches of using the bio-ethanol in diesel engines are lack. In this study, combustion tests with blend fuel of the gas oil and bio ethanol by 50% maximally due to a low cetane number of bio-ethanol were accomplished as a basic study of introduction of using the bioethanol in diesel engines. The result was that smoke emission was decreased with increase in proportion of the bio-ethanol, due to the increase of a amount of pre-mixed combustion with ignition delay. Although the amount of $CO_2$ is reduced according as the bio-ethanol is used(carbon neutral), the emission of $CO_2$ with increase in the proportion of the bio-ethanol was more increased due to lower a heat value of bio-ethanol than gas oil.

• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.9-12
• /
• 2012

Attempts to dope carbon nanotube (CNT) with impurities in order to control the electronic properties of the CNT is a natural course of action. Boron is known to improve both the structural and electronic properties. In this report, we study the field emission properties of Boron-doped double-walled CNT (DWCNT). Boron-doped DWCNT films were fabricated by catalytic decomposition of tetrahydrofuran and triisopropyl borate over a Fe-Mo/MgO catalyst at $900^{\circ}C$. We measured the field emission current by varying the doping amount of Boron from 0.8 to 1.8 wt%. As the amount of doped boron in the DWCNT increases, the turn-on-field of the DWCNT decreases drastically from 6 V/${\mu}m$ to 2 V/${\mu}m$. The current density of undoped CNT is 0.6 mA/$cm^2$ at 9 V, but a doped-DWCNT sample with 1.8 wt% achieved the same current density only at only 3.8 V. This shows that boron doped DWCNTs are potentially useful in low voltage operative field emitting device such as large area flat panel displays.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.83-92
• /
• 2012

Recently, many countries are tightening a variety of policies and controls with great efforts to reduce emission of GHGs(Greenhouse Gases) as concern for climate change heightens. The purpose of the study is to provide guidelines for planning and evaluate element and evaluate housing development. The elements are also assorted into 6 sections and 30 planning elements were drawn from them. It is drawn to 6 sections, 27 categories, 31 evaluation elements except cultural and perceptual aspects unrelated to planning elements from these elements. Case analysis has shown that most of planning elements were applied because these cases obtained environment-friendly certification in the country. Followings are the common characteristics. Firstly, it showed that application of planning element in all cases is excellent. Secondly, the case with excellent application of elements related with energy and application degree obtained excellent degree i environment-friendly certification in the country. Finally, application of planning elements related with renewable energy was in poor condition in all cases. With the utilization of SBTool, the evaluation results about planning elements of housing complex of Carbon emissions-reduction type showed that CASE-A obtained 11.17 points and CASE-B obtained 9.24 points. In the case of renewable energy section, it was confirmed that the evaluation doesn't work well. As a result, changes of planning elements affect environment-friendly extent. It was confirmed that accessibility to housing complex of Carbon emissions-reduction type could change. Estimated result of Amount of Carbon emission showed that annual energy consumption per each family of CASE-A is $4,269,964MJ/m^2$, as a result of which, Carbon emission is $234,815kg/m^2$. And annual energy consumption per family of CASE-B is $4,197,563MJ/m^2$, as a result of which, Carbon emission is $214,584kg/m^2$. Application of planning elements in the aspect of housing complex of Carbon emissions-reduction type shows that the level for Carbon emissions-reduction is high level. And study with assessment from the draft should be followed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1495-1501
• /
• 2013

This study aims to figure out the effectiveness of low-carbon oriented residential regeneration by on-site improvement method. For this, we examined some technical planning elements for carbon reduction and selected standard criteria of computation on energy use-based amount of carbon emission through previous literature review and case studies. Next, based on this, we compared and analyzed three types of carbon emission in the designated renewal area in Cheongju City. The three types of carbon emission were the existing development, the redevelopment of apartment by overall removal, and the development of low-carbon oriented residential regeneration by on-site improvement method. Finally, we examined proper way to reduce carbon emission in low-carbon oriented residential regeneration.

• Journal of Climate Change Research
• /
• v.5 no.3
• /
• pp.189-197
• /
• 2014

Carbon footprint of apple was a sum of $CO_2$ emission in the step of manufacturing waste of agri-materials, and greenhouse gas emission during apple cultivation. Input amount of agri-materials was calculated on 2007 Income reference of Apple by Rural Development Administration. Emission factor of each agri- materials was based on domestic data and Ecoinvent data. $N_2O$ emission factor was based on 1996 IPCC guideline. Carbon dioxide was emitted 0.64 kg $CO_2$ to produce 1 kg apple fruit, and carbon dioxide was emitted 43.6% in the step of the manufacturing byproduct fertilizer, 1.3% in the step of the manufacturing single fertilizer, 4.7% in the step of the manufacturing composite fertilizer, 6.3% in the step of the manufacturing agri-chemicals, 14.6% in the step of the manufacturing fuel, 11.5% in the step of the fuel combustion, 17.7% of $N_2O$ emission by nitrogen application and 0.18% of disposal of agri-materials. It is needed for farmers to use fertilization recommendation based on soil testing (soil. rda.go.kr) because scientific fertilization is a major tools to reduce carbon dioxide of apple production. The fertilization recommendation could be also basic data in Measurable-ReporTablele-Verifiable (MRV) system for carbon footprint.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.2
• /
• pp.67-76
• /
• 2012

BIM and its quantity take-off widely apply to the construction projects and LCCO2 Assessment using the BIM's quantity take-off function can be tried recently. Because BIM modeling programs such as Revit and ArchiCAD do not provide adequate library for LCCO2 Assessment, quantity take-off data should be conversed and applied to Carbon Emission Coefficient using Excel program or manual work. Therefore, the purpose of this research is 1) to propose the Unit Conversion Systems for Carbon Emission Coefficient, 2) to provide basic library sets for BIM based LCCO2 Assessment method, and 3) to apply 11 material library sets on a apartment unit plan modeling to pursue the CO2 emission evaluation of the material production in the process of LCCO2 Assessment. Research results showed CO2 emission amount of 458.64kgCO2/m2 from the apartment unit plan modeling.

• Journal of Environmental Science International
• /
• v.16 no.3
• /
• pp.287-297
• /
• 2007

Increasing carbon dioxide emissions from fossil fuel use and land-use change has been perturbing the balanced global carbon cycle and changing the carbon distribution among the atmosphere, the terrestrial biosphere, the soil, and the ocean. SGCM(Simple Global Carbon Model) was used to simulate global carbon cycle for the IPCC emissions scenarios, which was six future carbon dioxide emissions from fossil fuel use and land-use change set by IPCC(Intergovernmental Panel on Climate Change). Atmospheric $CO_2$ concentrations for four scenarios were simulated to continuously increase to $600{\sim}1050ppm$ by the year 2100, while those for the other two scenarios to stabilize at $400{\sim}600ppm$. The characteristics of these two $CO_2$-stabilized scenarios are to suppress emissions below $12{\sim}13$ Gt C/yr by tile year 2050 and then to decrease emissions up to 5 Gt C/yr by the year 2100, which is lower than the current emissions of $6.3{\pm}0.4$ Gt C/yr. The amount of carbon in the atmosphere was simulated to continuously increase for four scenarios, while to increase by the year $2050{\sim}2070$ and then decrease by the year 2100 for the other two scenarios which were $CO_2$-stabilized scenarios. Even though the six emission scenarios showed different simulation results, overall patterns were such similar that the amount of carbon was in the terrestrial biosphere to decrease first several decades and then increase, while in the soil and the ocean to continuously increase. The ratio of carbon partitioning to tile atmosphere for the accumulated total emissions was higher for tile emission scenario having higher atmospheric $CO_2$, however that was decreasing as time elapsed. The terrestrial biosphere and the soil showed reverse pattern to the atmosphere.