• KIEAE Journal
• /
• v.11 no.3
• /
• pp.31-36
• /
• 2011

People spend most of their time inside buildings recently, so the indoor air quality is one of the most important factors to human health. Furthermore, minimum energy use with proper ventilation systems for pleasant indoor environment is necessary because of energy shortage over the world. The concern to maintain proper indoor air quality at home has been increased, and a proper indoor air quality is continuously requested by the residents. By measuring and analyzing the density fluctuation of $CO_2$ through indoor humidity and testing personal reactions regarding comfort condition, we can obtain a way to effective ventilation. Heat and carbon dioxide emissions from resident's metabolism and construction materials could be the causes of indoor air pollution. If these materials stay indoors for a long time, it could directly influence the resident's health condition with diseases. It also leads massive energy use. Therefore, the way to save energy and to have effective control of indoor ventilation is needed. This study presented the control method of bedroom ventilation by $CO_2$ concentration change and subjective evaluation.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.667-674
• /
• 2008

In this study, we prepared Fe-activated carbon fiber(ACF)/$TiO_2$ composites with titanium (VI) n-butoxide (TNB) as the titanium source for ACF pre-treated with iron compounds through the impregnation method. In terms of textural surface properties, the composites demonstrate a slight decrease in the BET surface area of the samples and an increase in the amount of iron compounds treated. The surface morphology of the Fe-ACF/$TiO_2$ composites was characterized by means of SEM. The composites have a porous texture with homogenous compositions of Fe and titanium dioxide distributed on the sample surfaces. The phase formation and structural transition of the iron compounds and titanium dioxide were observed in X-ray diffraction patterns of the Fe-ACF/$TiO_2$ composites. The chemical composition of the Fe-ACF/$TiO_2$ composites, which was investigated with EDX shows strong peaks for the C, O, Fe and Ti elements. The photo degradation results confirm that the Fe-ACF/$TiO_2$ composites show excellent removal activity for the COD in piggery waste due to photocatalysis of the supported $TiO_2$, radical reaction by Fe species, and the adsorptivity and absorptivity of ACF.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.23-30
• /
• 2011

International cooperation to reduce greenhouse gas emissions is expected to provide a big crisis and a great opportunity at the same time for our industry that heavily consumes energy. To cope actively with the international environmental regulation, such as the Framework Convention on Climate Change, quantitative measurement of the volume of greenhouse gases emitted by various industries and quantitative prediction of the greenhouse gas emissions of the future are becoming more important than anything else at the national level. This study aims to propose the calculation process of carbon dioxide($CO_2$) emission for building in life cycle. This paper describes and compares 9 different tool for environmental load estimation with LCA. This study proposed the calculation process for quantitatively predicting and assessing $CO_2$ emissions during the life cycle of buildings based on the life cycle assessment(LCA). The life cycle steps of buildings were divided into the design/supervision, new construction, repair, renovation, use of operating energy in buildings, maintenance, and reconstruction stage in the life cycle inventory analysis and the method of assessing the environmental load in each stage was proposed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.9
• /
• pp.669-678
• /
• 2007

In this study, the ventilation characteristics is investigated numerically of the longitudinal ventilation method in the curved long road tunnel. Numerical work has been conducted for the jet fan location by utilizing the commercial finite-volume code, FLUENT. Configuration of the tunnel is three-lane, 1600 m long, $120m^2$ in area, 3000 m curvature radius. The velocity profile, distribution of mono-dioxide carbon and flow rate of air are examined in the tunnel. Through the analysis, it is found that the difference of ventilation flow rate Is a little by the jet fan location, but tunnel outlet setup (CASEIII) of jet fans is the most efficient concerned with CO concentration.

• Journal of Convergence for Information Technology
• /
• v.8 no.3
• /
• pp.193-198
• /
• 2018

Recently, the casualties of automobile traffic accidents are rapidly increasing, and serious accidents involving serious injury and death are increasing more than those of ordinary people. More than 70% of major accidents occur in drowsy driving. Therefore, in this paper, we studied the drowsiness prevention system to prevent large-scale disasters of traffic accidents. In this paper, we propose a real-time flicker recognition method for drowsy driving detection system and drowsy recognition according to the increase of carbon dioxide. The drowsy driving detection system applied the existing image detection and the deep running, and the carbon dioxide detection was developed based on the IoT. The drowsy prevention system using both of these techniques improved the accuracy compared to the existing products.

• Structural Engineering and Mechanics
• /
• v.84 no.6
• /
• pp.733-741
• /
• 2022

The amount of natural gas that is used on a worldwide scale is continuously going up. Natural gas and acidic components, such as hydrogen sulfide and carbon dioxide, cause significant corrosion damage to transmission lines and equipment in various quantities. One of the fundamental processes in natural gas processing is the separation of acid gases, among which the safety and environmental needs due to the high toxicity of hydrogen sulfide and also to prevent wear and corrosion of pipelines and gas transmission and distribution equipment, the necessity of sulfide separation Hydrogen is more essential than carbon dioxide and other compounds. Given this problem's significance, this endeavor aims to extend the lifespan of the transmission lines' pipes for gas and oil. Zinc oxide nanoparticles made from the environmentally friendly source of Allium scabriscapum have been employed to accomplish this crucial purpose. This is a simple, safe and cheap synthesis method compared to other methods, especially chemical methods. The formation of zinc oxide nanoparticles was shown by forming an absorption peak at a wavelength of about 355 nm using a spectrophotometric device and an X-ray diffraction pattern. The size and morphology of synthesized nanoparticles were determined by scanning and transmission electron microscope, and the range of size changes of nanoparticles was determined by dynamic light scattering device.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.188-189
• /
• 2020

In the field of architecture, concrete and steel bars are the most common and popular combinations. The relationship between the two in a structure is a complementary good that increases in utility when consuming both materials at the same time. However, the combination of the two, which has been perceived as semi-permanent, often faces repairs or reconstruction without its lifespan reaching decades. There are a number of deterioration factors at work for the reason for this phenomenon. Among them, the neutralization of concrete in particular refers to the process in which calcium hydroxide inside concrete reacts with carbon dioxide and loses alkalinity, which creates a corrosive environment for rebars inside concrete, causing serious damage to concrete. In this study, we intend to use a multi-physical analysis program using finite element analysis method to analyze the degree of carbonation according to the internal temperature and concentration of carbon dioxide in concrete, thereby contributing to the prediction of long-term neutralization of concrete and the research related to measures for neutralization of concrete.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1041-1050
• /
• 2009

The ambient temperature and concentration of carbon dioxide in Gwangju and the reducing method of temperature, air pollutants were investigated using the atmospheric data in Gwangju. Average ambient temperature ($T_{a-ave}$ was $13.5^{\circ}C$ during 1961 to 2008. The temperature was predicted as increasing of about $2.7^{\circ}C$ in 2108 after 100 years using the trend line of regression equation. Carbon dioxide was 370.7 and 391.4 ppm at Anmyundo, in 1999 and 2008, respectively, showing proportionally increased as ambient temperature. The temperature at Gwangju, $14.2^{\circ}C$ during 1997 to 2008, was a little higher than at neighboring counties as Naju, Damyang, Hwasoon, and Jangsung. In Gwangju, Spring will start in mid-January of 2108, Summer in mid-May, Autumn in mid-October, and Winter in last-December. The average relative humidity in the air ($RH_{a-ave}$) was gradually decreased as the temperature inversely increased. The average $CO_2$ was 457 ppm, which is 65.6 ppm higher than that in Anmyundo, korean background area of $CO_2$ in 2008. Carbon dioxide showed positive correlation, both of them, with carbon monoxide (0.87) and relative humidity (0.48).

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.126-134
• /
• 1986

7-Alkyl-2-aminophenazine-5,10-dioxides bearing butyl, hexyl and octyl group were synthesized by the reaction of 4-aminophenol with 6-alkylbenzofuroxans which had been obtained from aniline and n-alkyl alcohols. And 2-aminophenazine-5,10-dioxide was prepared by the reaction of 4-aminophenol with benzofuroxan. Infrared, nuclear magnetic resonance spectrophotometers, and elemental analyzer were employed to identify the products concerned with the synthetic processes. Surface tension of aqueous solutions of these phenazine derivatives was determined by surface tensiometer and it was found that the surface tension decreased with an increase of the number of carbon in the alkyl group. Antimicrobial activities were evaluated in terms of minimum inhibitory concentration by a dilution method. The butyl derivative showed the highest activity among these derivatives. It was observed that the antimicrobial activity of these alkyl substituted 2-aminophenazine-5,10-dioxides was stronger than that of 2-aminophenazine-5,10-dioxide.

• Journal of Hydrogen and New Energy
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2018

The amount of biogas increases as the amount of organic waste increases. Recently, biogas from organic waste have been made much efforts to utilize as a energy. In particular, the concentration of $CH_4$ and $CO_2$ generated from sewage sludge and livestock manure treatment are 60-70% and 30-35%, and $CH_4$ and $CO_2$ generated from food wastes are 60-80% and 20-40%. In case of landfill gas, $CH_4$ and $CO_2$ have a concentration of 40-60% and 40-60% respectively. Therefore, in order to use the biogas more widely, it is necessary to convert the biogas to methanol, LNG or DME. In this study, experiments were conducted to produce hydrogen and carbon monoxide through various biogas reforming reactions on $Ni/Ce-ZrO_2/Al2O3$ catalysts. The experiment of synthetic gas synthesis was carried out on a wide concentrations of methane and carbon dioxide, which were the major constituents of biogas from various organic wastes. The effect of $(O_2+CO_2)/CH_4$ (=R') on the yields of hydrogen and carbon monoxide, the conversion rate of methane and carbon dioxide was investigated. Also simulation for syngas synthesis on the $CO_2$ reforming of $CH_4$ was computed by employing total Gibbs free energy minimization method using PRO/II simulator, and compared with the experimental results on wet and dry reforming reaction of biogas.