DOI QR코드

DOI QR Code

Application of nanoparticles in extending the life of oil and gas transmission pipeline

  • Yunye, Liu (School of Petroleum Engineering, China University of Petroleum (East China)) ;
  • Hai, Zhu (Guangzhou Gas Group South Branch) ;
  • Jianfeng, Niu (Henan YUNENG Holdings Company Limited)
  • Received : 2022.02.22
  • Accepted : 2022.12.05
  • Published : 2022.12.25

Abstract

The amount of natural gas that is used on a worldwide scale is continuously going up. Natural gas and acidic components, such as hydrogen sulfide and carbon dioxide, cause significant corrosion damage to transmission lines and equipment in various quantities. One of the fundamental processes in natural gas processing is the separation of acid gases, among which the safety and environmental needs due to the high toxicity of hydrogen sulfide and also to prevent wear and corrosion of pipelines and gas transmission and distribution equipment, the necessity of sulfide separation Hydrogen is more essential than carbon dioxide and other compounds. Given this problem's significance, this endeavor aims to extend the lifespan of the transmission lines' pipes for gas and oil. Zinc oxide nanoparticles made from the environmentally friendly source of Allium scabriscapum have been employed to accomplish this crucial purpose. This is a simple, safe and cheap synthesis method compared to other methods, especially chemical methods. The formation of zinc oxide nanoparticles was shown by forming an absorption peak at a wavelength of about 355 nm using a spectrophotometric device and an X-ray diffraction pattern. The size and morphology of synthesized nanoparticles were determined by scanning and transmission electron microscope, and the range of size changes of nanoparticles was determined by dynamic light scattering device.

Keywords

References

  1. Abel, S., Tesfaye, J.L., Shanmugam, R., Dwarampudi, L.P., Lamessa, G., Nagaprasad, N., Benti, M. and Krishnaraj, R. (2021), "Green synthesis and characterizations of zinc oxide (ZnO) nanoparticles using aqueous leaf extracts of coffee (Coffea arabica) and its application in environmental toxicity reduction", J. Nanomater., 2021, 3413350. https://doi.org/10.1155/2021/3413350.
  2. Aberle, D. and Agarwal, D.C. (2008), "High performance corrosion resistant stainless steels and nickel alloys for oil & gas applications", CORROSION 2008, OnePetro, March.
  3. Alamri, A.H. (2020), "Localized corrosion and mitigation approach of steel materials used in oil and gas pipelines-An overview", Eng. Fail. Anal., 116, 104735. https://doi.org/10.1016/j.engfailanal.2020.104735.
  4. Asadi, M., Nazarian-Firouzabadi, F., Naghavi, M. and Ismaili, A. (2022), "Scallion proteome analysis in Iranian A. stipitatum and A. scabriscapum species to identify proteins with different expression", Iran. J. Rangel. Forest. Plant Breed. Genetic Res., 29(2), 1. https://doi.org/10.22092/ijrfpbgr.2021.355432.1389.
  5. Azimi, M., Mirjavadi, S.S., Shafiei, N. and Hamouda, A.M.S. (2016), "Thermo-mechanical vibration of rotating axially functionally graded nonlocal Timoshenko beam", Appl. Phys. A, 123(1), 104. https://doi.org/10.1007/s00339-016-0712-5.
  6. Azimi, M., Mirjavadi, S.S., Shafiei, N., Hamouda, A.M.S. and Davari, E. (2018), "Vibration of rotating functionally graded Timoshenko nano-beams with nonlinear thermal distribution", Mech. Adv. Mater. Struct., 25(6), 467-480. https://doi.org/10.1080/15376494.2017.1285455.
  7. Bamdad, H., Hawboldt, K. and MacQuarrie, S. (2018), "A review on common adsorbents for acid gases removal: Focus on biochar", Renew. Sustain. Energy Rev., 81, 1705-1720. https://doi.org/10.1016/j.rser.2017.05.261.
  8. Bandeira, M., Giovanela, M., Roesch-Ely, M., Devine, D.M. and da Silva Crespo, J. (2020), "Green synthesis of zinc oxide nanoparticles: A review of the synthesis methodology and mechanism of formation", Sustain. Chem. Pharm., 15, 100223. https://doi.org/10.1016/j.scp.2020.100223.
  9. Barker, C. (1990), "Calculated volume and pressure changes during the thermal cracking of oil to gas in reservoirs1", AAPG Bull., 74(8), 1254-1261. https://doi.org/10.1306/0C9B247F1710-11D7-8645000102C1865D.
  10. Bharatiya, U., Gal, P., Agrawal, A., Shah, M. and Sircar, A. (2019), "Effect of corrosion on crude oil and natural gas pipeline with emphasis on prevention by ecofriendly corrosion inhibitors: A comprehensive review", J. Bio-Tribo-Corros., 5(2), 35. https://doi.org/10.1007/s40735-019-0225-9.
  11. Chen, C., Li, C., Reniers, G. and Yang, F. (2021), "Safety and security of oil and gas pipeline transportation: A systematic analysis of research trends and future needs using WoS", J. Clean. Prod., 279, 123583. https://doi.org/10.1016/j.jclepro.2020.123583.
  12. Cole, I.S. and Marney, D. (2012), "The science of pipe corrosion: A review of the literature on the corrosion of ferrous metals in soils", Corros. Sci., 56, 5-16. https://doi.org/10.1016/j.corsci.2011.12.001.
  13. Ebrahimi, F. and Shafiei, N. (2016), "Application of Eringen's nonlocal elasticity theory for vibration analysis of rotating functionally graded nanobeams", Smart Struct. Syst., 17(5), 837-857. https://doi.org/10.12989/sss.2016.17.5.837.
  14. Ebrahimi, F. and Shafiei, N. (2017), "Influence of initial shear stress on the vibration behavior of single-layered graphene sheets embedded in an elastic medium based on Reddy's higher-order shear deformation plate theory", Mech. Adv. Mater. Struct., 24(9), 761-772. https://doi.org/10.1080/15376494.2016.1196781.
  15. Ebrahimi, F., Shafiei, N., Kazemi, M. and Mousavi Abdollahi, S.M. (2017), "Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(15), 1257-1273. https://doi.org/10.1080/15376494.2016.1227499.
  16. Ehyaei, J., Akbarshahi, A. and Shafiei, N. (2017), "Influence of porosity and axial preload on vibration behavior of rotating FG nanobeam", Adv. Nano Res., 5(2), 141. https://doi.org/10.12989/anr.2017.5.2.141.
  17. Feng, Q., Li, R., Nie, B., Liu, S., Zhao, L. and Zhang, H. (2016), "Literature review: Theory and application of in-line inspection technologies for oil and gas pipeline girth weld defection", Sensor., 17(1), 50. https://doi.org/10.3390/s17010050.
  18. Georgiadis, A.G., Charisiou, N.D. and Goula, M.A. (2020), "Removal of hydrogen sulfide from various industrial gases: A review of the most promising adsorbing materials", Catal., 10(5), 521. http://doi.org/10.3390/catal10050521.
  19. Ghadiri, M., Hosseini, S.H.S. and Shafiei, N. (2016a), "A power series for vibration of a rotating nanobeam with considering thermal effect", Mech. Adv. Mater. Struct., 23(12), 1414-1420. https://doi.org/10.1080/15376494.2015.1091527.
  20. Ghadiri, M., Mahinzare, M., Shafiei, N. and Ghorbani, K. (2017a), "On size-dependent thermal buckling and free vibration of circular FG Microplates in thermal environments", Microsyst. Technol., 23(10), 4989-5001. https://doi.org/10.1007/s00542-017-3308-x.
  21. Ghadiri, M. and Shafiei, N. (2016a), "Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen's theory using differential quadrature method", Microsyst. Technol., 22(12), 2853-2867. https://doi.org/10.1007/s00542-015-2662-9.
  22. Ghadiri, M. and Shafiei, N. (2016b), "Vibration analysis of a nano-turbine blade based on Eringen nonlocal elasticity applying the differential quadrature method", J. Vib. Control, 23(19), 3247-3265. https://doi.org/10.1177/1077546315627723.
  23. Ghadiri, M. and Shafiei, N. (2016c), "Vibration analysis of rotating functionally graded Timoshenko microbeam based on modified couple stress theory under different temperature distributions", Acta Astronautica, 121, 221-240. https://doi.org/10.1016/j.actaastro.2016.01.003.
  24. Ghadiri, M., Shafiei, N. and Akbarshahi, A. (2016b), "Influence of thermal and surface effects on vibration behavior of nonlocal rotating Timoshenko nanobeam", Appl. Phys. A, 122(7), 673. https://doi.org/10.1007/s00339-016-0196-3.
  25. Ghadiri, M., Shafiei, N. and Alavi, H. (2017b), "Thermo-mechanical vibration of orthotropic cantilever and propped cantilever nanoplate using generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(8), 636-646. https://doi.org/10.1080/15376494.2016.1196770.
  26. Ghadiri, M., Shafiei, N. and Alavi, H. (2017c), "Vibration analysis of a rotating nanoplate using nonlocal elasticity theory", J. Solid Mech., 9(2), 319-337.
  27. Ghadiri, M., Shafiei, N. and Alireza Mousavi, S. (2016c), "Vibration analysis of a rotating functionally graded tapered microbeam based on the modified couple stress theory by DQEM", Appl. Phys. A, 122(9), 837. https://doi.org/10.1007/s00339-016-0364-5.
  28. Ghadiri, M., Shafiei, N. and Babaei, R. (2017d), "Vibration of a rotary FG plate with consideration of thermal and Coriolis effects", Steel Compos. Struct., 25(2), 197-207. https://doi.org/10.12989/scs.2017.25.2.197.
  29. Ghadiri, M., Shafiei, N. and Safarpour, H. (2017e), "Influence of surface effects on vibration behavior of a rotary functionally graded nanobeam based on Eringen's nonlocal elasticity", Microsyst. Technol., 23(4), 1045-1065. https://doi.org/10.1007/s00542-016-2822-6.
  30. Ghadiri, M., Shafiei, N., Salekdeh, S.H., Mottaghi, P. and Mirzaie, T. (2016d), "Investigation of the dental implant geometry effect on stress distribution at dental implant-bone interface", J. Brazil. Soc. Mech. Sci. Eng., 38(2), 335-343. https://doi.org/10.1007/s40430-015-0472-8.
  31. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  32. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  33. Izol, E., Temel, H., Yilmaz, M.A., Yener, I., Olmez, O.T., Kaplaner, E., Firat, M., Hasimi, N., Ozturk, M. and Ertas, A. (2021), "A detailed chemical and biological investigation of twelve Allium species from Eastern Anatolia with chemometric studies", Chem. Biodivers., 18(1), e2000560. https://doi.org/10.1002/cbdv.202000560.
  34. Jiang, Y., Zhou, P., Zhang, P., Adeel, M., Shakoor, N., Li, Y., Li, M., Guo, M., Zhao, W., Lou, B., Wang, L., Lynch, I. and Rui, Y. (2022), "Green synthesis of metal-based nanoparticles for sustainable agriculture", Environ. Poll., 309, 119755. https://doi.org/10.1016/j.envpol.2022.119755.
  35. Kirtane, A.R., Verma, M., Karandikar, P., Furin, J., Langer, R. and Traverso, G. (2021), "Nanotechnology approaches for global infectious diseases", Nat. Nanotech., 16(4), 369-384. https://doi.org/10.1038/s41565-021-00866-8.
  36. Kumseranee, S., Punpruk, S. and Dararatana, N. (2022), "Extension of non-sour severity boundary for carbon steel pipeline", SPE Asia Pacific Oil & Gas Conference and Exhibition, OnePetro, October.
  37. Lloyd, D. (2006), "Hydrogen sulfide: Clandestine microbial messenger?", Trend. Microbiol., 14(10), 456-462. https://doi.org/10.1016/j.tim.2006.08.003.
  38. Marriott, R.A., Pirzadeh, P., Marrugo-Hernandez, J.J. and Raval, S. (2015), "Hydrogen sulfide formation in oil and gas", Can. J. Chem., 94(4), 406-413. https://doi.org/10.1139/cjc-2015-0425.
  39. Martinez, D., Gonzalez, R., Montemayor, K., Juarez-Hernandez, A., Fajardo, G. and Hernandez-Rodriguez, M.A.L. (2009), "Amine type inhibitor effect on corrosion-erosion wear in oil gas pipes", Wear, 267(1), 255-258. https://doi.org/10.1016/j.wear.2008.12.056.
  40. Md Ishak, N.A.I., Kamarudin, S.K. and Timmiati, S.N. (2019), "Green synthesis of metal and metal oxide nanoparticles via plant extracts: an overview", Mater. Res. Expr., 6(11), 112004. https://doi.org/10.1088/2053-1591/ab4458.
  41. Mirjavadi, S.S., Afshari, B.M., Shafiei, N., Hamouda, A., Kazemi, M. and Structures, C. (2017a), "Thermal vibration of two-dimensional functionally graded (2D-FG) porous Timoshenko nanobeams", Steel Compos. Struct., 25(4), 415-426. https://doi.org/10.12989/scs.2017.25.4.415.
  42. Mirjavadi, S.S., Matin, A., Shafiei, N., Rabby, S. and Mohasel Afshari, B. (2017b), "Thermal buckling behavior of two-dimensional imperfect functionally graded microscale-tapered porous beam", J. Therm. Stress., 40(10), 1201-1214. https://doi.org/10.1080/01495739.2017.1332962.
  43. Mirjavadi, S.S., Mohasel Afshari, B., Shafiei, N., Rabby, S. and Kazemi, M. (2017c), "Effect of temperature and porosity on the vibration behavior of two-dimensional functionally graded micro-scale Timoshenko beam", J. Vib. Control, 24(18), 4211-4225. https://doi.org/10.1177/1077546317721871.
  44. Mirjavadi, S.S., Rabby, S., Shafiei, N., Afshari, B.M. and Kazemi, M. (2017d), "On size-dependent free vibration and thermal buckling of axially functionally graded nanobeams in thermal environment", Appl. Phys. A, 123(5), 315. https://doi.org/10.1007/s00339-017-0918-1.
  45. Mousavi, S.M., Shafiei, N. and Dadvand, A. (2017), "Numerical simulation of subsonic turbulent flow over NACA0012 airfoil: Evaluation of turbulence models", Sigma J. Eng. Nat. Sci., 35(1), 133-155.
  46. Nesic, S. (2007), "Key issues related to modelling of internal corrosion of oil and gas pipelines-A review", Corros. Sci., 49(12), 4308-4338. https://doi.org/10.1016/j.corsci.2007.06.006.
  47. Ohaeri, E., Eduok, U. and Szpunar, J. (2018), "Hydrogen related degradation in pipeline steel: A review", Int. J. Hydrog. Energy, 43(31), 14584-14617. https://doi.org/10.1016/j.ijhydene.2018.06.064.
  48. Omidi, S., Oskooee, M.B. and Shafiei, N. (2013), "Finite element analysis of an ultra-fine grained Titanium dental implant covered by different thicknesses of hydroxyapatite layer", Ind. J. Dentist., 4(1), 1-4. https://doi.org/10.1016/j.ijd.2012.10.002.
  49. Parashar, M., Shukla, V.K. and Singh, R. (2020), "Metal oxides nanoparticles via sol-gel method: A review on synthesis, characterization and applications", J. Mater. Sci.: Mater. Electron., 31(5), 3729-3749. https://doi.org/10.1007/s10854-020-02994-8.
  50. Qu, M., Liang, T., Hou, J., Liu, Z., Yang, E. and Liu, X. (2022), "Laboratory study and field application of amphiphilic molybdenum disulfide nanosheets for enhanced oil recovery", J. Petrol. Sci. Eng., 208, 109695. https://doi.org/10.1016/j.petrol.2021.109695.
  51. Schwermer Carsten, U., Lavik, G., Abed Raeid, M.M., Dunsmore, B., Ferdelman Timothy, G., Stoodley, P., Gieseke, A. and de Beer, D. (2008), "Impact of nitrate on the structure and function of bacterial biofilm communities in pipelines used for injection of seawater into oil fields", Appl. Environ. Microbiol., 74(9), 2841-2851. https://doi.org/10.1128/AEM.02027-07.
  52. Shafiei, N., Ghadiri, M. and Mahinzare, M. (2019), "Flapwise bending vibration analysis of rotary tapered functionally graded nanobeam in thermal environment", Mech. Adv. Mater. Struct., 26(2), 139-155. https://doi.org/10.1080/15376494.2017.1365982.
  53. Shafiei, N., Ghadiri, M., Makvandi, H. and Hosseini, S.A. (2017a), "Vibration analysis of Nano-Rotor's Blade applying Eringen nonlocal elasticity and generalized differential quadrature method", Appl. Math. Model., 43, 191-206. https://doi.org/10.1016/j.apm.2016.10.061.
  54. Shafiei, N., Hamisi, M. and Ghadiri, M. (2020), "Vibration analysis of rotary tapered axially functionally graded Timoshenko nanobeam in thermal environment", J. Solid Mech., 12(1), 16-32.
  55. Shafiei, N. and Kazemi, M. (2017a), "Buckling analysis on the bidimensional functionally graded porous tapered nano-/micro-scale beams", Aerosp. Sci. Technol., 66, 1-11. https://doi.org/10.1016/j.ast.2017.02.019.
  56. Shafiei, N. and Kazemi, M. (2017b), "Nonlinear buckling of functionally graded nano-/micro-scaled porous beams", Compos. Struct., 178, 483-492. https://doi.org/10.1016/j.compstruct.2017.07.045.
  57. Shafiei, N., Kazemi, M. and Fatahi, L. (2017b), "Transverse vibration of rotary tapered microbeam based on modified couple stress theory and generalized differential quadrature element method", Mech. Adv. Mater. Struct., 24(3), 240-252. https://doi.org/10.1080/15376494.2015.1128025.
  58. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016a), "Comparison of modeling of the rotating tapered axially functionally graded Timoshenko and Euler-Bernoulli microbeams", Physica E: Low Dimens. Syst. Nanostruct., 83, 74-87. https://doi.org/10.1016/j.physe.2016.04.011.
  59. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016b), "Nonlinear vibration behavior of a rotating nanobeam under thermal stress using Eringen's nonlocal elasticity and DQM", Appl. Phys. A, 122(8), 728. https://doi.org/10.1007/s00339-016-0245-y.
  60. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016c), "Nonlinear vibration of axially functionally graded tapered microbeams", Int. J. Eng. Sci., 102, 12-26. https://doi.org/10.1016/j.ijengsci.2016.02.007.
  61. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016d), "On size-dependent vibration of rotary axially functionally graded microbeam", Int. J. Eng. Sci., 101, 29-44. https://doi.org/10.1016/j.ijengsci.2015.12.008.
  62. Shafiei, N., Kazemi, M., Safi, M. and Ghadiri, M. (2016e), "Nonlinear vibration of axially functionally graded non-uniform nanobeams", Int. J. Eng. Sci., 106, 77-94. https://doi.org/10.1016/j.ijengsci.2016.05.009.
  63. Shafiei, N., Mirjavadi, S.S., Afshari, B.M., Rabby, S. and Hamouda, A.M.S. (2017c), "Nonlinear thermal buckling of axially functionally graded micro and nanobeams", Compos. Struct., 168, 428-439. https://doi.org/10.1016/j.compstruct.2017.02.048.
  64. Shafiei, N., Mirjavadi, S.S., MohaselAfshari, B., Rabby, S. and Kazemi, M. (2017d), "Vibration of two-dimensional imperfect functionally graded (2D-FG) porous nano-/micro-beams", Comput. Meth. Appl. Mech. Eng., 322, 615-632. https://doi.org/10.1016/j.cma.2017.05.007.
  65. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016f), "On size-dependent nonlinear vibration of porous and imperfect functionally graded tapered microbeams", Int. J. Eng. Sci., 106, 42-56. https://doi.org/10.1016/j.ijengsci.2016.05.007.
  66. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016g), "Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory and GDQEM", Compos. Struct., 149, 157-169. https://doi.org/10.1016/j.compstruct.2016.04.024.
  67. Shafiei, N. and She, G.L. (2018), "On vibration of functionally graded nano-tubes in the thermal environment", Int. J. Eng. Sci., 133, 84-98. https://doi.org/10.1016/j.ijengsci.2018.08.004.
  68. Shivanian, E., Ghadiri, M. and Shafiei, N. (2017), "Influence of size effect on flapwise vibration behavior of rotary microbeam and its analysis through spectral meshless radial point interpolation", Appl. Phys. A, 123(5), 329. https://doi.org/10.1007/s00339-017-0955-9.
  69. Singh, M. and Markeset, T. (2009), "A methodology for risk-based inspection planning of oil and gas pipes based on fuzzy logic framework", Eng. Fail. Anal., 16(7), 2098-2113. https://doi.org/10.1016/j.engfailanal.2009.02.003.
  70. Smith, S.N. and Joosten, M.W. (2006), "Corrosion of carbon steel by H2S in CO2 containing oilfield environments", CORROSION 2006.
  71. Tajallipour, N., Zhu, Z., Teevens, P.J. and Place, T. (2012), "Parametric study of solids deposition in a heavy-oil transmission pipeline", CORROSION 2012, OnePetro, March.
  72. Van Hinte, T., Gunton, T.I. and Day, J.C. (2007), "Evaluation of the assessment process for major projects: A case study of oil and gas pipelines in Canada", Impact Assess. Project Appr., 25(2), 123-137. https://doi.org/10.3152/146155107X204491.
  73. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bidirectional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound. Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  74. Wasim, M. and Djukic, M.B. (2022), "External corrosion of oil and gas pipelines: A review of failure mechanisms and predictive preventions", J. Nat. Gas Sci. Eng., 100, 104467. https://doi.org/10.1016/j.jngse.2022.104467.
  75. Wen, X., Bai, P., Luo, B., Zheng, S. and Chen, C. (2018), "Review of recent progress in the study of corrosion products of steels in a hydrogen sulphide environment", Corr. Sci., 139, 124-140. https://doi.org/10.1016/j.corsci.2018.05.002.
  76. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  77. Xue, X., Zhang, H., Liu, H., Wang, S., Li, J., Zhou, Q., Chen, X., Ren, X., Jing, Y., Deng, Y., Geng, Z., Wang, X. and Su, J. (2022), "Rational design of multifunctional CuS nanoparticle-PEG composite soft hydrogel-coated 3D hard polycaprolactone scaffolds for efficient bone regeneration", Adv. Funct. Mater., 32(33), 2202470. https://doi.org/10.1002/adfm.202202470.
  78. Yavorskyi, A.V., Karpash, M.O., Zhovtulia, L.Y., Poberezhny, L.Y. and Maruschak, P.O. (2017), "Safe operation of engineering structures in the oil and gas industry", J. Nat. Gas Sci. Eng., 46, 289-295. https://doi.org/10.1016/j.jngse.2017.07.026.
  79. Zubail, A., Traidia, A., Masulli, M., Vatopoulos, K., Villette, T. and Taie, I. (2021), "Carbon and energy footprint of nonmetallic composite pipes in onshore oil and gas flowlines", J. Clean. Prod., 305, 127150. https://doi.org/10.1016/j.jclepro.2021.127150.