• Bulletin of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.496-498
• /
• 1996

Fatty alcohol ethers, nonionic surfactants which are used as general purpose emulsifiers were separated by use of water-modified carbon dioxide mobile phase in capillary supercritical fluid chromatography. Much greater peak intensities and improved separation were observed in the chromatogram with on-line modified mobile phase than with pure CO2. A simple method for the preparation of on-line modified mobile phase is also introduced.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.109-120
• /
• 2021

Global warming due to increased carbon dioxide is perceived as one of the factors threatening the future. Efforts are being made to reduce carbon dioxide emissions in each industry around the world. In particular, environmental loads and impacts during the life cycle of SOC structures and buildings have been quantitatively assessed through a quantitative method called Life Cycle Assessment (LCA). However, the construction sector has gone through difficulty in quantitative assessment for several reasons: 1) LCI DB is not fully established; 2) the life cycle is very long; 3) the building structures are unique. Therefore, it takes enormous effort and time to carry out LCA. Rather than estimating carbon emissions with accuracy, this study aims to present a simplified estimation model that allows owners or designers to easily estimate carbon dioxide emissions with little effort, given that rapid and rough decisions regarding environmental load reduction are to be made. This study performs the LCA using data from 25 road construction projects across the country, followed by multiple regression analyses to derive a simplified carbon estimation model (SLCA). The study also carries out a comparative analysis with values estimated by performing a typical LCA. The comparison analysis shows an error rate of less than 5% for 16 road projects.

• Clean Technology
• /
• v.11 no.3
• /
• pp.117-122
• /
• 2005

N-vinyl caprolactam (NVCL), a kind of N-vinyl amide monomer, must be dissolved in continuous phase ($scCO_2$) for dispersion polymerization in supercritical carbon dioxide. Phase behavior of $CO_2$+NVCL is very important and necessary for determining initial polymerization condition and for monomer extraction from final polymer. There is the limitation of experimental method for obtaining pure properties of the monomer because of the possibility of polymerization. And N-methyl caprolactam (NMCL) is the useful solvent for the gas treating process. In the viewpoint of molecular thermodynamics, NVCL and NMCL have same functional group i.e. ${\varepsilon}$-caprolactam. In the case of NVCL, hydrogen of amide group is substituted with vinyl group and for NMCL, hydrogen of amide group is substituted with methyl group. We suggested modified group contribution method for this ${\varepsilon}$-caprolactam derivatives. This new group contribution parameter was applied to correlate $CO_2$ + N-vinyl caprolactam or N-methyl caprolactam system.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.5
• /
• pp.1-6
• /
• 2013

This study was performed to develop a method for quantitative analysis obtaining the amount of calcium carbonate minerals formed when Ca salts biomimetically reacted with carbon dioxide. There were two methods compared; 1) volumetric calcimeter method that determining the amount of released carbon dioxide after calcium carbonate minerals were acidified by 4N HCl and 2) Thermogravimetry-Differential Thermal Analysis (TG-DTA) adopting differential decomposition temperature breaking-up the structural link within calcium carbonate minerals. The comparisons were made by batch experiment (i.e., biocalcification process) along with control (i.e., nominal concentration of $CaCO_3$ prepared). For the control, TG-DTA took a minor root mean square deviation (RMSD) of 1.1~5.9 mg, whereas volumetric calcimeter exposed a greater RMSD of 28.3 mg. For the biocalcification, the amount of $CaCO_3$ was more precisely obtained for TG-DTA rather than that of volumetric calcimeter. It was decided that TG-DTA was more successfully used for quantitative analysis to observe the amount of calcium carbonate minerals derived from biocalcification.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.232-238
• /
• 2016

In this study, a liquid carbonation method was applied for producing precipitate calcium carbonate by liquid-liquid reaction. Also a shuttle mechanism of wet chemical absorption using MEA was utilized. The high concentration $CO_2$(A) and exhaust gas(B) was used for collecting carbon dioxide in the 30% MEA aqueous solution, and $CO_2$ was fixed with rate of 0.35 mg of $CO_2$ per mg of sludge through the liquid carbonation process. It was found from SEM data that calcium carbonate was mainly made up with spherical vaerite with the mixing of a small quantity of calcite.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.15-21
• /
• 2015

This paper presents the feasibility study on $CO_2$ carrier for carbon dioxide marine geological storage. Conceptual design was carried out to acquire $CO_2$ carriers by retrofitting existing vessels and new ship-building. Based on conceptual design, the acquisition cost of $CO_2$ carriers was estimated. Finally, necessary expense and number of ships were estimated based on operational plans for the assumed scenario.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.201-204
• /
• 2007

A novel self-humidifying composite membrane for the proton exchange membrane fuel cell (PEMFC) at low humidity condition was developed. The $Pt/TiO_2 catalyst particles were synthesized via supercritical impregnation methods. Pt precursor was dissolved in supercritical carbon dioxide and impregnated onto $TiO_2$ particles. Pt precursors were platinum(II) acetylacetonate, Dimethyl(1,5-cyclooctadiene) platinum(II) and we controlled the ratio of Pt to $TiO_2$ The impregnated Pt precursor was converted to $TiO_2$ supported Pt nanoparticle under various reducing conditions. $TiO_2$ catalyst particles were dispersed uniformly into the Nafion solution, and then $Pt/TiO_2/Nafion$composite membrane was prepared using solution-cast method. The size, dispersion and content of the platinum had been characterized with Transmission Electron Micrograph (TEM), X-ray diffract ion (XRD) and Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES). The cell performance with the self-humidifying composite membrane was compared with a recast Nafion membrane under both humidified and dry conditions at 65 $^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1347-1353
• /
• 2014

It's possible for a human to breathe under water, if dissolved oxygen is effectively used. Fish can stay under water using the gill which extracts dissolved oxygen from water. Water includes small amounts of oxygen, so a human needs larger amounts of water to acquire oxygen enough for underwater breathing. The exhalation gas from a human is another method to get higher amounts of oxygen under water. It mainly composes of oxygen, nitrogen and carbon dioxide. So, if only carbon dioxide is decreased, the exhalation gas has good characteristics for breathing of a human under water. In this paper, composition of the exhalation gas from a human was analyzed using GC. Based on these results, the synthesized gas was prepared and mixed into water which was used for experimental devices to analyze separation characteristics of dissolved gases from water. Experimental devices included a water pump, a hollow fiber membrane module and a vacuum pump. The effects of pressure and water flow on separation characteristics of synthesized gas were investigated. The compositions of gases separated from water using synthesized gas were investigated using GC. These results expect to be applied to the development of underwater breathing technology for a human.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.41-48
• /
• 1997

Separation of EPA and DHA from fish oil fatty acid ethyl ester (FAFE) by urea adductive crystallization method was carried out in the supercritical carbon dioxide (SC $CO_2$) as a solvent. Our results showed that SC $CO_2$ is a good candidate as a solvent in the urea adductive crystallization to separate FAFE by the number of unsaturated bonds. Compared to the separation process using methanol. SC $CO_2$ yielded better performance in the overall selectivity of EPA and DHA. The effect of process variables on separation of EPA and DHA was discussed in detailed. A hybrid technology of SC $CO_2$ fractionation and urea adductive crystallization with SC $CO_2$ was conformed as a viable process to separate and concentrate EPA and DHA from fish oil.

• Journal of Biosystems Engineering
• /
• v.18 no.1
• /
• pp.60-70
• /
• 1993

In this study, the environment variations and distributions in different types of greenhouses were measured and analyzed. The elements of environment analyzed were temperature, relative humidity, illumination, carbon dioxide and wind velocity. The analyzed greenhouse types were auto-multi type which has an automatic environment control system and multiple continuous arches, regular-multi type which has an temperature control system and multiple continuous arches, and single arch type which has no environment control system without manual temperature keeping method. The results of this study can be used for the greenhouse building and managements.