• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.101-112
• /
• 2019

The grouting method is utilized to reinforce and waterproof poor grounds, enhance the bearing capacity of geo-structures damaged from differential settlement. The purpose of this research is to improve the compressive strength and degree of grout using reinforcing fibers and blast furnace slag powder. In this regard, this study has conducted uniaxial compression tests for the specimens with high ratios (higher than 50%) of blast furnace slag powder. The carbon fiber content was increased by 0, 0.5, and 1.0% to coMpare its compressive strength with that of aramid fiber. The uniaxial compressive strength increased with the increase of fiber content and the bridging activity by fiber in cement tended to increase uniaxial compressive strength. Based on the results, it was confirmed that the aramid fiber has a gel time of 14 seconds and the uniaxial compressive strength is more than 3 Mpa coMpared to carbon fiber.

• Composites Research
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2021

Commercialized carbon fiber obtained from polyacrylonitrile(PAN) precursor is subjected to oxidation stabilization at 180 to 300℃ in air atmosphere and carbonization process at 1600℃ or lower in inert gas atmosphere. Both of these processes use a lot of time and high energy, but are essential and important for producing high-performance carbon fibers. Therefore, in recent years, an alternative stabilization technology by being assisted with various other energy sources such as plasma, electron beam and microwave which can shorten the process time and lower energy consumption has been studied. In this study, the PAN precursor was stabilized by using plasma treatment and heat treatment continuously. The morphology, structural changes, thermal and physical properties were analyzed using Field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), Fourier transform infrared(FT-IR), Thermogravimetric analysis(TGA) and Favimat.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2022

The purpose of this study was to develop self-heating concrete by utilizing the conduction resistance of concrete in order to reduce the risk of occurrence of black ice in the concrete pavement in winter and to prevent damage caused by freez-thawing effect. For this purpose, it was attempted to evaluate the strength and temperature exothermic characteristics using powder and liquid waste CNTs and a waste cathode agent as a conduction promotion. It was analyzed that liquid waste CNT had an effective dispersion degree in the mortar and a small decrease in strength occurred. In addition, DC 24 V was supplied by applying steel mesh, copper foil and copper wire to the mortar as electrodes, and the temperature change characteristics according to the mixing ratio of spent CNTs, anodes and carbon fibers were evaluated. In addition, by evaluating the temperature characteristics according to the electrode spacing from the selected optimal mixture, it was confirmed that it had sufficient heating characteristics up to an electrode spacing of 100 mm up to AC 50 V.

• Composites Research
• /
• v.22 no.6
• /
• pp.32-38
• /
• 2009

In this study, the energy absorption capabilities and failure modes of four different kinds of circular tubes made of carbon, Kevlar and carbon-Kevlar hybrid composites with epoxy resin have been evaluated. In order to achieve these goals, these tubes were fabricated with unidirectional prepregs and compressive tests were conducted for the tubes under 10mm/min loading speed. From the test results, carbon/epoxy tubes were collapsed by brittle fracturing mode and showed the best energy absorption capabilities, while Kevlar/epoxy tubes were crushed by local buckling mode and worst. The hybrid [$90_C/0_K$] tubes were failed in a local bucking mode and showed good post crushing integrity, whereas [$90_K/0_C$] tubes were failed in a lamina bending mode and bad post crushing integrity.

• Composites Research
• /
• v.36 no.6
• /
• pp.388-394
• /
• 2023

In composites manufacturing, increasing resin impregnation is a key way to speed up the manufacturing process and improve product quality. While resin improvement is important, simple fiber surface treatments can also improve resin flowability. In this study, different plasma treatment times were applied to carbon fiber fabrics to improve the impregnation between resin and fiber. Electrical resistivity measurements were used to evaluate the dispersion of resin in the fibers, which changed with plasma treatment. The effect of fiber surface treatment on resin spreadability could be observed in real time. When inserting a carbon fiber tow into the resin, the amount of resin that soaked into the tow was measured to objectively compare resin impregnation. Five minutes of plasma treatment improved the tensile and compressive strength of the composite by more than 50%, while reducing the void content and increasing the fire point impregnation flow rate. Finally, a dynamic flexural fatigue test was conducted using a portion of the composite used as an architectural composite part, and the composite part did not fail after one million cycles of a 3 kN load.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.53-60
• /
• 2024

We developed a coin cell battery using high-strength carbon fiber and glass fiber, taking a preliminary step toward creating a battery that supports structural loads and stores energy, with potential applications in satellite structures. High-strength fiber-based electrodes and electrolytes were fabricated and applied to coin cells to evaluate their electrochemical performance. Consequently, the discharge capacities under continuous charge/discharge cycles and high discharge rates of 2 C-rate were determined to be 122.9 and 103.5 mAh/g, respectively, indicating that high-strength fibers can replace conventional battery components. Although current performance is lower than that of commercial batteries, this research has demonstrated significant potential as foundational work for multi-functional energy storage devices and is expected to contribute to the development of structural batteries for satellite applications.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.5
• /
• pp.577-585
• /
• 2024

Reinforced concrete structures are vulnerable to the corrosion of reinforcing steel, which is typically caused by the neutralization of concrete and the presence of surrounding chlorides in various environmental conditions. This corrosion leads to cracking in the concrete, thereby reducing durability of the structure and shortening its lifespan. To address this issue, there has been an increasing interest in research on Fiber Reinforced Polymers(FRP), particularly Carbon Fiber Reinforced Polymer(CFRP). CFRP, composed of carbon fibers, is noted for its lightweight properties, outstanding tensile strength, and high elastic modulus. It also offers excellent corrosion resistance and durability against weathering. Despite the potential benefits, the data on CFRP's performance and integration into reinforced concrete structures remain limited. This study contributes fundamental data regarding the application of CFRP, highlighting its advantages and exploring its practical implications. A significant finding from this research is that concrete specimens cured underwater exhibited superior bond strength compared to those cured under dry conditions.

• Polymer Science and Technology
• /
• v.21 no.2
• /
• pp.149-156
• /
• 2010

전기방사 탄소섬유와 s-VGCFs는 그 미세구조의 특성 때문에 응용분야가 서로 다르다. 전기방사 탄소나노섬유는 유기물을 섬유화하고 그것을 탄화하기 때문에 VGCFs에 비해서 낮은 가격에 대량생산이 가능하고 촉매를 사용하지 않기 때문에 전극으로 사용할 경우 금속불순물에 대한 부반응의 우려가 없다. 한편, 결정성이 낮고 세공이 잘 발달되어 비표면적이 크기 때문에 이온을 흡착해서 에너지를 저장하는 전기화학 캐패시터나 가스 흡착 분리나 촉매의 지지체로 사용하는데 장점이 있다. 이에 비해서 s-VFCFs는 섬유의 직경이 기존의 VGCF에 비해서 작으면서 잘 발달된 흑연구조가 동심원 구조를 하고 있어 굴곡강도가 크고 열 및 전기전도도가 우수하여 납축전지나 Li 이온전지의 충전제로 사용하여 역학적 특성과 향상시켜 주는 역할을 한다. 또한, 금속과 복합화하여 가벼우면서도 강도를 증가시켜주는 보강재로 사용가능하다.

• Computers and Concrete
• /
• v.20 no.2
• /
• pp.229-246
• /
• 2017

The dynamic bending response of single walled carbon nanotube reinforced composite (SWCNTRC) plates subjected to hygro-thermo-mechanical loading are investigated in this paper. The mechanical load is considered as wind pressure for dynamic bending responses of SWCNTRC plate. The dynamic version of the High Order shear deformation Theory (HSDT) for a composite plate with Matrix and SWCNTRC plate is first formulated. Distribution of fibers through the thickness of the SWCNTRC plate could be uniform or functionally graded (FG). The dynamic displacement response is predicted by using Nemarck integration method. The effective material properties of SWCNTRC are estimated by using micromechanics based modeling approach. The effect of different environmental condition, volume fraction of SWCNT, Width-to-thickness ratio, wind pressure, different SWCNTRC-FG plates, boundary condition, E1/E2 ratio, different temperature on dynamic displacement response is investigated. The dynamic displacement response is compared with the available literature and it shows good agreement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.717-720
• /
• 1999

Recently, the fiber composite materials such as carbon fiber, glass fiber, or aramid, have been frequently used in strengthening reinforced concrete structures. The fiber composite materials typically have orthotropic characteristic and the strength changes significantly acording to the direction of fibers and the method of the lamination. In this study, an algorithm to estimate the stress-strain relationship of the composite materials which have different fiber directions and symmetric or non-symmetric lamination has been developed by using Tsai-Hill and Tsai-Wu failure criteria and progressive laminate failure theory. This algorithm has been implemented to several stress-strain models for the laterally confined concrete compression members such as Mander, Hosotani, and Nakatsuka. The evaluated stress-strain behaviors by the different models are discussed.