• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.2001-2006
• /
• 2009

Temperature dependence of the critical micelle concentration (CMC), $x_{CMC}$, in micellization can be described by ln $x_{CMC}$ = A + BT + C lnT + D/T, which has been derived statistical-mechanically. Here A, B, C, and D are fitting parameters. The equation fits the CMC data better than conventionally used polynomial equations of temperature. Moreover, it yields the unique(exponent) value of 2 when the CMC is expressed in a power-law form. This finding is quite significant, because it may point to the universality of the thermal behavior of CMC. Hence, in this article, the nature of the equation ln $x_{CMC}$ = A + BT + C lnT + D/T is examined from a lattice-theory point of view through the Flory-Huggins model. It is found that a linear behavior of heat capacity change of micellization is responsible for the CMC equation of temperature.

• Architectural research
• /
• 제7권2호
• /
• pp.55-60
• /
• 2005

Based on an experimental study, this study provides an equation to describe the shear strength of high-strength concrete deep beams with rectangular openings and without web reinforcements. Twenty-four concrete deep beams were tested with the variables of concrete strength, size of web opening, and shear span-to-depth ratio. The proposed equation is expressed as the sum of the shear strength provided by longitudinal bars and concrete. It is illustrated that the proposed equation predicts the load-carrying capacity of the deep beams more properly than the experimental equations proposed by other researchers.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.14-20
• /
• 2008

In this paper, the characteristics of trapezoidal air screws is studied. These screws can e applied to the elevator having column driving shaft. The generalized coordinate transformation technique is used to solve incompressible Reynolds' equation because the air lubricated plane is twisted. The transformed equation is discretized by the base of Finite difference method. Using Visual C++ language, a GUI program which can calculate he load carrying capacity for this kind of air screw is developed, then the design variables for these air screws is studied.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.715-720
• /
• 1999

The objective of this study is to develope a new equation that can predict the flexural capacity in RC beams strengthened with Carbon Fiber Sheets(CFS). To evaluate the influence of each experimental variable, the conducted experimental test data were investigated; the variables that had an effect on the increment of the flexural capacity were the number of plys, the strengthening length, the reinforced type such as U-type after reinforcing the bottom of the beam. The previous equations were compared using the existing experimental test data, then analyzed for the merits and demerits of existing equations, using the coefficient of correlation(R). The proposed equation was derived in such a way that main parameters and their combination were obtained from the analytical study and then their coefficients were determined by regression analysis using the previous test data. As a result, the proposed equation showed the better agreement than the previous equations.

• 한국공간구조학회논문집
• /
• 제15권1호
• /
• pp.47-55
• /
• 2015

This paper shows the simplified equation to predict the ultimate moment capacity and corresponding rod stress in reinforced concrete beam with external post-tensioning rods. Because the stress of external post-tensioning rod depends on the beam deflection, the previous analytical model for post-tensioned beams requires a tedious iteration process. Also, the stress equations in ACI code or other researchers' models are suitable only for internal tendons in concrete beams. In this study, given the lack of analytical approaches to predict the nominal stress of the external unbonded rod, a simple and robust equation has been proposed for externally post-tensioned concrete beams. It is concluded that the proposed equation predicted the stress of external steel rods in post-tensioned concrete beams reasonably well.

• 한국지반공학회논문집
• /
• 제20권1호
• /
• pp.21-27
• /
• 2004

본 연구에서는 $\phi=0$ 조건에서 준설매립지반에 대한 지지력 산정의 문제점과 적용범위를 파악하기 위하여 2차 원모형재하시험을 실시하였고 기존의 제안식과 재하시험결과를 비교분석하여 다음과 같은 결과를 얻었다. 재하판폭의에 해당되는 깊이까지의 평균비배수전단강도와 깊이 이내의 임의의 깊이에서 측정된 전단강도 값의 차이가 $\pm50%$ 이상일 경우에는 $\phi=0$ 해석을 단일층으로 고려할 경우 사용되는 지지력계수, Nc는 적용성이 떨어지는 것으로 나타났다. 또한, 특별한 제안사항없이 포화된 점토에 적용하는 것으로 되어있는 $\phi=0$ 해석에 이용되는 지지력 계수, Nc=5.7, 5.14에 의한 준설매립지반의 지지력 산정은 불안전측의 값을 도출하여 적용성이 떨어지므로, 일축압축시험이 가능한 약 75% 이하의 함수비에서 적용이 가능할 것으로 판단된다.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.421-427
• /
• 2005

This work analyzes the behaviors of aerated lubricant in the gap between con-rod bearing and journal. It is assumed that the film formation with aerated lubricant is influenced by the two major factors. One is the density characteristics of the lubricant due to the volume change of lubricant for the formation of bubbles and the other is the viscosity characteristics of the lubricant due to the surface tension of the bubble in the lubricant. These two major factors surprisingly increase the load capacity in some ranges of bubble sizes and densities. Modified Reynolds' equation is developed for the computation of fluid film pressure with the effects of aeration ratio in the lubricant. From the calculated load capacity by solving modified Reynolds' equation, journal locus is computed with Mobility method after comparing it with the applied load at each time step. The differences of journal orbits between aerated and pure lubricants are shown in the computed results.

• 지식경영연구
• /
• 제15권3호
• /
• pp.95-120
• /
• 2014

In order to successfully adapt in ever-changing social and economic environment, organizational members need to get a capacity to be open to accepting change, effectively leverage the knowledge assets accumulated inside and outside the company for pursuing new values. In this study, we defined such competence as generativity capacity and demonstrated mechanism for forming generativity capacity and an impact on job performance. We suggested absorptive capacity, tertius iungens orientation, use of information technology as antecedent variables of generativity capacity. For empirically verifying the proposed model, we collected sample data from 201 workers and conducted analysis using a structural equation modeling. The empirical analysis results revealed that all of the proposed antecedent variables significantly impacted on generativity capacity, which in turn had a significant effect on job performance. We expect that this study will provide researchers and managers who want to get a broader perspective on knowledge management beyond the boundaries with useful theoretical and practical implications.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.409-416
• /
• 1997

• Tuberculosis and Respiratory Diseases
• /
• 제81권1호
• /
• pp.42-48
• /
• 2018

Background: The diffusing capacity of the lung is influenced by multiple factors such as age, sex, height, weight, ethnicity and smoking status. Although a prediction equation for the diffusing capacity of Korea was proposed in the mid-1980s, this equation is not used currently. The aim of this study was to develop a new prediction equation for the diffusing capacity for Koreans. Methods: Using the data of the Korean National Health and Nutrition Examination Survey, a total of 140 nonsmokers with normal chest X-rays were enrolled in this study. Results: Using linear regression analysis, a new predicting equation for diffusing capacity was developed. For men, the following new equations were developed: carbon monoxide diffusing capacity (DLco)=-10.4433-0.1434${\times}$age (year)+0.2482${\times}$heights (cm); DLco/alveolar volume (VA)=6.01507-0.02374${\times}$age (year)-0.00233${\times}$heights (cm). For women the prediction equations were described as followed: DLco=-12.8895-0.0532${\times}$age (year)+0.2145${\times}$heights (cm) and DLco/VA=7.69516-0.02219${\times}$age (year)-0.01377${\times}$heights (cm). All equations were internally validated by k-fold cross validation method. Conclusion: In this study, we developed new prediction equations for the diffusing capacity of the lungs of Koreans. A further study is needed to validate the new predicting equation for diffusing capacity.