• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.168-179
• /
• 2016

This study describes an improved model for estimating pedestrian LOS (Level of Service) by utilizing the space occupied by pedestrians. The method introduced the concept of conflict along the bi-directional pedestrian flow which enables calculating conflict area and average travel time in walking. Especially, the method incorporates the idea of generalized density concept which can consider effective walking area and pedestrian flow rates that might vary during the analysis period. After establishing methodology, adjustments of pedestrian LOS criteria in term of walking space occupied by pedestrians were performed. As a result, walking-occupied space at capacity level is 0.68 and corresponding pedestrian flow rate was calculated as 80 persons/min/m, while different pedestrian-occupied spaces were ordered to classify LOS at the points where the gradient changes. Furthermore, the statistical verification of service levels has shown that there is significant difference among all LOS categories at 5% significance level.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.43-46
• /
• 2003

This paper presents capacity characteristics of the indoor LOS(Line-Of-Sight) propagation channel for MIMO system at 5GHz. The distance between antenna elements, their moving path, and number of transmitting and receiving antennas can be determined by wanted eigen-vlaue, and channel capacity of the MIMO communication channel using only reliable simulation without measurements. The simulation uses 3D Ray tracing and patch scattering model to which electromagnetic material constants are applied. As distance between antenna elements increases, distribution of the eigen-value show a tendency to decrease, but channel capacity increases in LOS environment. However, despite of short distance between antenna elements, large value of channel capacity is obtained in positions which have high AS. When the position of receiver antennas are shifted, channel capacity hardly changed, and as number of antenna elements increases, channel capacity also increases regularly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.267-271
• /
• 2006

In this paper, we use the OFDM transmission channel model applied to the MIMO antennas considering spatial propagation property to evaluate and investigate the ergodic capacity of the channel. Specially, we have applied our results to 3GPP TR 25.99 V1.1.0 case 1 LOS off channel description and calculated ergodic capacity with parameters, cluster angle spread and angle of arrival(AOA). Our results show that as the cluster angle spread increase the channel capacity increase until 35 degree, but for more than 35 degree channel capacity does not improved.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1594-1611
• /
• 2008

Level of Service(LOS) is classified A through F in highway system (KHCM), usually using LOS C in express way and D in national road. (LOS C denotes 75% of capacity) Meanwhile in Railroad System, there is no clearly defined LOS, and the daily demand in infra-structure planning has been used. It is very important that LOS provides consequently a consensus of opinion between users and operators because there is a close relation between user demand and level of services. Considering this, there should exist clearly defined Level of Services in Railroad System Planning so that demand can be predicted precisely.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.7-15
• /
• 2010

The walkway level of service (LOS) is conceptualized using pedestrian flow rate, speed, and density according to the Korean Highway Capacity Manual (KHCM). However, as it is based on the data of commuters at peak hours, it needs to be reevaluated considering various trip purposes and a pleasant pedestrian environment. Thus, the authors aimed to investigate and analyze the characteristics of each group: pedestrians during the peak hour and those during the non-peak hour. Then they were verified statistically for the walkway evaluation criteria. In this study, the authors investigated pedestrian speed and flow in a complex transit center walkway with diverse trip purposes by peak and non-peak hour. Then the authors statistically verified the differences between the groups. A model was built for estimating pedestrian density by speed and flow; it was used to calculate the walkway capacity (67.3p/m/m) corresponding to LOS E. The authors established new criteria for LOS, applying the LOS from the HCM. These standards can then be used as the design standards for pedestrian walkways.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.7-16
• /
• 2009

Korea Highway Capacity Manual (2001) proposes only LOS(Level of Service) analysis method on non-control and two-way-stop intersections, not dealing with the analysis method on LOS for roundabouts, nor even including the term 'roundabout'. This study selects proper MOEs for roundabouts and criteria the LOS through simulation analysis. To attain this goal, the authors reviewed the methods to select proper MOEs in the first step, criteria the Los. For this study, the MOEs were chosen from existing literature, and used for the criteria. The MOEs to be applied to roundabouts in this research were entry traffic volume, v/c (volume/capacity) ratio, and average vehicle delays. The results showed that the maximum entry traffic volume(LOS F) at local one-lane roundabout was analyzed to be 1,700pcph and average vehicle delay 18 seconds LOS A was analyzed as 700pcph and average vehicle delay 3 seconds and v/c 0.41 in this case Maximum entry traffic volume(LOS F) at local area 2 lane roundabouts was analyzed as 2,900pcph and their average vehicle delay as 31 seconds LOS A was analyzed to be 1.500pcph and average vehicle delay 8 seconds, v/c 0.52.

• Steel and Composite Structures
• /
• v.2 no.1
• /
• pp.21-34
• /
• 2002

A model of the process of local buckling in tubular steel structural elements is presented. It is assumed that this degrading phenomenon can be lumped at plastic hinges. The model is therefore based on the concept of plastic hinge combined with the methods of continuum damage mechanics. The state of this new kind of inelastic hinge is characterized by two internal variables: the plastic rotation and the damage. The model is valid if only one local buckling appears in the plastic hinge region; for instance, in the case of framed structures subjected to monotonic loadings. Based on this damage model, a new finite element that can describe the development of local buckling is proposed. The element is the assemblage of an elastic beamcolumn and two inelastic hinges at its ends. The stiffness matrix, that depends on the level of damage, the yielding function and the damage evolution law of the two hinges define the new finite element. In order to verify model and finite element, several small-scale frames were tested in laboratory under monotonic loading. A lateral load at the top of the frame was applied in a stroke-controlled mode until local buckling appears and develops in several locations of the frame and its ultimate capacity was reached. These tests were simulated with the new finite element and comparison between model and test is presented and discussed.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.161-172
• /
• 2008

The level of service (LOS) evaluation method of the Highway Capacity Manual (HCM) is limited to intersections with pre-timed signal operation, while advanced real-time traffic control systems have been expending in the field. This paper proposes a preliminary framework for LOS analysis at isolated intersections controlled by COSMOS, the real-time traffic control systems robustly utilizing the degree of saturation as basic inputs. The proposed LOS evaluation framework was devised with a pilot model developed to estimate the average cycle length and green times of COSMOS. The validation test showed that the proposed framework was able to accurately project the LOS, which was separately evaluated based upon field data.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.75-84
• /
• 2012

PURPOSES : This paper aims to improve the evaluation method of the Level of Service(LOS) for urban streets presented by the current Korean Highway Capacity Manual(KHCM) and suggest its utilization plan as a part of the methods to evaluate the sustainability of a transportation policy. METHODS : This paper carried out a research in 3 steps to develop a new evaluation method. First of all, this paper reviewed the previous studies related to the LOS of urban streets and the socially requested items for a sustainable transportation system. Then this paper derived an index and weight through expert questions to select an evaluation index. Lastly, this paper compared the results according to the existing evaluation methods with the new evaluation methods through case studies. This paper used an Analytic Hierarchy Process(AHP) for importance analysis and weight selection between new evaluation items and indices, and applied a Grey System Theory(GST) for a synthetic and integrated evaluation between the selected evaluation indices. RESULTS : As a result of evaluating the LOS according to the existing evaluation methods and the integrated evaluation methods using a GST through case studies, it was analyzed that new methods' results are less than or equal to the existing evaluation methods; and as a result of applying a weight between evaluation indices according to AHP, it was noticed that the total score seems to rise more when the LOS in the existing evaluation is calculated lower. It was analyzed that the LOS calculated by reflecting the newly established evaluation items and the importance between indices in this study has difference from the LOS of the existing urban streets. CONCLUSIONS : It is expected that this evaluation method can diagnose the current conditions when establishing a future sustainable traffic system and can be used for the measurement of the sustainability effects of the improvement plans and so on.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.75-83
• /
• 2012

This study is to find a shortcoming embedded in the current Korean Highway Capacity Manual (KHCM) on reflecting a heavy vehicle effect to the highway capacity. The KHCM suggests to handle the percent heavy vehicle to deal with its effect to a capacity regardless of density levels. Authors hypothesized in this study that the effect of heavy vehicles would vary at different levels of traffic density - the effect would be comparably insignificant when a density is low and it becomes comparably significant when it becomes high. Field data from a freeways located in Seoul were collected for 360 hours (15 days) and categorized them into a set of operation conditions grouped by 15 minutes and by the LOS density levels. Comparison between the field measured and the estimated by the KHCM method showed that the KHCM method overestimated the effect of heavy vehicles in LOS B and C but underestimated in LOS E. The results suggested that there be a difference pattern from the one the KHCM expected and brought discussion on further studies.