• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.88-94
• /
• 2013

This paper proposes a capacitive touch switch using a switched-capacitor. The proposed method charges capacitance for measurement using the switched-capacitor until the voltage across the capacitance reaches a threshold voltage. As the proposed method uses the number of times being charged to measure the capacitance, the method has no relation with the operating frequency of the switched-capacitor. This paper also shows the quantization resolution of the proposed method is related to the capacitance in the switched-capacitor and the threshold voltage, i.e., the resolution is improved when the capacitance in the switched-capacitor is decreased and the threshold voltage is increased. Simulation result shows the method gives 31fF quantization resolution when the capacitance in the switched-capacitor is 50fF and threshold voltage is 80% of the supply voltage.

• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.331-336
• /
• 2011

최근 편리함과 측정의 정확성으로 인해 Capacitance sensor가 토양수분 연구나 물관리에 국제적으로도 널리 이용되고 있다. 이 연구는 Capacitance sensor (EnviroSCAN, Sentek Ltd.)가 화산회토양이 많이 분포하는 제주도 지역에서도 활용성이 있는 지를 알아보기 위해 유기물함량이 다른 제주도의 대표적인 토양 종류를 이용하여 Calibration 시험을 수행하였다. 시험 결과 화산회토양에서는 비화산회토양과 달리 센서의 Scaled frequency와 토양의 용적수분함량 간에 Calibration식이 로그식 형태로 나타내는 것이 일반적으로 적용되는 지수식 형태로 나타내는 것보다 상관이 더 높게 나타났다. 또한 화산회토양이 많이 분포하는 지역에 서는 토양수분함량이 높아 습하거나 매우 적어 건조할 경우에는 Capacitance sensor에 의한 수분함량 측정값이 건조기를 이용한 수분함량 값보다 과소하게 측정될 수 있었다. Capacitance sensor를 이용하여 화산회토양에서 토양 수분함량을 정확하게 측정하기 위해서 Calibration식에 적용될 수 있는 현실적인 계수값을 제시하였다. 또 현재 이용되는 EnviroSCAN capacitance probes의 활용성을 제고하기 위해서 계수값을 유기물함량별로 추정하는 식을 제시 하였다. Capacitance sensor를 이용하여 토양수분함량을 정확하게 측정하기 위해서는 사전에 토양의 공극분포, 유기물함량, EC 등 측정여건을 파악하여 조절하는 것이 필요하였다.

• 한국전기전자재료학회논문지
• /
• 제30권11호
• /
• pp.693-698
• /
• 2017

In this study, the thermal degradation properties of polyethylene terephthalate film has been examined by the capacitance, Tan ${\delta}$, thermography, FTIR, and SEM results at temperatures of $90{\sim}170^{\circ}C$ and frequencies of 0.3~3,000 kHz. It was found that the capacitance decreased with increasing thermal imaging temperature, probably caused by weakening of chemical bond with increasing temperature. Tan ${\delta}$ decreased upon increasing temperature from $90^{\circ}C$ to $170^{\circ}C$, probably due to the molecular motion of COOH radical or OH radical. The FT-IR measurement reveals that no structural change of the material occurs upon thermal radiation. The SEM measurement shows that the material is stabilized by thermal decomposition with increasing temperature; however, excessive thermal degradation obstructs the stabilization of the material.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1607-1610
• /
• 2007

The measurement technology of the electrical and optical properties of CCFL and EEFL for LCD-BLU is investigated. The lamp current and voltage are affected by the leakage of parasitic capacitance. The methods using the photometer and the integrating sphere are compared to determine the lamp efficiency.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.560-564
• /
• 1999

Burr sensing for burr size measurement and deburring process control is one of the essential elements in an automated deburring procedure. This paper presents the implementation of capacitance sensing and acoustic emission (AE) to deburring. The first application is the "on-line" measurement of burrs using a capacitance sensor. A non-contact capacitance gauging sensor is attached to an ultra precision milling machine which was used as a positioning system. The setup is used to measure burr profiles along machined workpiece edges. The proposed scheme is shown to be accurate, easy to setup, and with minor modifications, readily applicable to automatic deburring processes. As the second example, AE signals were sampled and analyzed for the sensor feedback of a precision deburring process - laser deburring -. The results, such as the sensitivity of AE signals to burr shapes and edge detection capability show a clear correlation between physical process parameters and the AE signals. A subsequent control strategy for deburring automation is also briefly discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1733-1736
• /
• 2005

Many studies have been carried out to produce 3D features in the size range between $10{\mu}m\~10,000{\mu}m$, called Meso-scale. If these miniaturized systems have high relative accuracy and good volumetric utilization, it is possible to manufacture more complex and accurate shapes with various materials as well as there are advantages of reducing energy, space and resources. Due to imperfect components and misalignment in assembly, it is necessary to assess the accuracy of the miniaturized system itself to obtain high relative accuracy. Laser interferometers are widely used to measure geometric errors called as quasi-static errors. For miniaturized system, however, it is difficult to install the required accessories such as optics and the measuring range is limited because of the size of the system and also this method is very expensive. Moreover, it is impossible to measure each error component simultaneously. A new system to measure simultaneously multiple geometric errors is proposed using capacitance sensors. Each error was measured using capacitance sensors and a measurement algorithm was mathematically derived. The experiments show that the proposed measurement system can be used effectively to assess the accuracy of miniaturized system at a low cost.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.333-340
• /
• 1996

Cu 확산방지막으로서의 Tin의 특성을 면저항 특정, X선 회절 분석, SEM, AES, capacitance-voltage(C-V) 측정에 의하여 평가하고, Cu의 확산을 민감하게 알아내는 정도를 특성 평가 방법간에 비교하였다. 여러 가지 증착방법에 의하여 Cu/TiN/Ti/SiO2/Si 구조의 다층 박막시편을 제작하였으며, 이 시편을 10% H2/90% Ar분위기, 열처리 온도 500~$800{\circ}C$ 범위에서 2시간 동안 열처리하였다. TiN의 Cu 확산방지 효과가 소멸된 경우 Cu 박막 표면에서 불규칙한 모양의 spot을 관찰할 수 있었으며 outdiffusion된 Si를 검출할 수 있었다. MOS capacitor의 C-V 특성은 열처리 온도에 따라 급격하게 변화하였다. C-V 측정에서 inversion capacitance는 열처리 온도 500~$700^{\circ}C$범위에서 열처리 온도가 높아질수록 감소하다가 $800^{\circ}C$에서 크게 증가하였으며, 이러한 특성의 변화는 TiN을 통해서 $SiO_2$와 Si내로 확산된 Cu에 의하여 발생되는 것으로 생각된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.447-448
• /
• 2012

• Corrosion Science and Technology
• /
• 제8권1호
• /
• pp.21-26
• /
• 2009

The influence of $H_2S$ on the corrosion of iron and the corrosion prevention mechanism of an inhibitor was investigated with a differential capacitance measurement and a weight loss measurement method. The results show that $H_2S$ accelerates both the anodic iron dissolution and the cathodic hydrogen evolution in most cases. However, $H_2S$ acts as an inhibitor of the corrosion of iron under certain special conditions. An EIS method is proposed to explain the ability of inhibitors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.683-684
• /
• 2008

The resistance is frequency dependent by the Seeback effect, loading effect, Eddy current loss, uniformly distributed inductance of the resistance element and uniformly distributed self-capacitance of the resistance element and capacitance between resistance element and it's box. A precise ac resistance measurement system has been developed for using as maintaining and dissemination of national ac resistance standards. The developed resistance measurement system can be used as a instrument of national ac resistance standards at frequency less than 10 kHz and it's measurement accuracy was 0.23(${\mu}{\Omega}/{\Omega}$)+4.2 ${\mu}{\Omega}$ at 1592 Hz and 20 V.