• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.138-138
• /
• 2003

Low temperature co-fired ceramic (LTCC) technology offers significant benefits over the other established packaging technologies for high density, high microwave frequency, and fast signal application. Most conventional electroceraramics do not meet the basic requirements in respect of sinterability for LTCC technology. Attention is, therefore, focused on the role of glasses because of the capability they supply with lower sintering temperatures. In this study, commercial ceramic (MBRT-90) in the system BaO-N $d_2$ $O_3$-Ti $O_2$ (BNT: 40 ~ 80 wt%) and L $a_2$ $O_3$- $B_2$ $O_3$-Ti $O_2$ glass (LBT;60 ~ 20 wt%) were prepared. These glass/ceramic composites were evaluated for sintering behavior, phase evaluation, densities, interface reaction, crystallinity, microstructure and microwave dielectric properties. It was found that the addition LBT glass frits significantly lowered the sintering temperature to below 90$0^{\circ}C$ and as temperature increased (750~90$0^{\circ}C$) densification developed dynamically which was meant to be as over 95% of relative density. It is supposed that in the microstructure, the grain size was increased accompanying with the formation of different phases such as LaB $O_3$ and Ti $O_2$ under the condition of increasing sintering temperature. The sintered bodies represented applicable dielectric properties, namely 20 ~ 40 for $\varepsilon_{{\gamma}}$, ~ 10000 GHz for Q* $f_{0}$ and 10~80 ppm/$^{\circ}C$ for $\tau$$_{f}$. The results suggest that the composite is one of feasible candidates for the microwave use in LTCC technology.y.e use in LTCC technology.y.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.222-222
• /
• 2011

Plastic product is increasing by the growth of its demand and most of refused plastics are incinerated or reclaimed. However, the refused plastic is not easily decomposed and has the environmental problem with its various toxic gas in case of incineration. Therefore, many countries such as USA, Japan, Germany and other developed industrial countries as well as Korea are interested in studying the recyclable resource of refused plastic. The macromolecular waste pyrolysis has the advantage of collecting of raw materials in high price and can at least get fuel gas or oil with high heat capacity. It also discharges low waste gas and low toxic gas including SOx, NOx and HCl heavy metals. However, pyrolyzed oil includes enough excess unsaturated hydrocarbons to form tar, which can cause the nozzle of engines to plug when pyrolyzed oil is used as fuel. Activated carbon was proven to have prominent adsorption capability among the other adsorbents that were mainly composed of carbon. This study examined the possibility of application in activated charcoal of its solid formation by analysing the feature of pyrolysis which is one of the chemical recycling methods and getting chemical analysis of the product and activated energy. Analyze the element of the oil produced by pyrolysis using GC-MS. The experiment of tar adsorption using fly-ash showed that fly-ash improved the optical intensity of pyrolyzed oil and decreased oxygen compounds in the pyrolyzed oil.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.1
• /
• pp.209-217
• /
• 2013

The objective of this study was to evaluate the bone regeneration capability of silk membrane plus 3% 4-hexylresorcinol (3% 4-HR plus SM) in a rabbit calvarial defect model. Twenty New Zealand white rabbits were used in this study. Bilateral round shaped defects were created in the parietal bone (diameter: 8.0 mm). And the defects were covered with (1) 3% 4-HR plus SM, (2) collagen membrane (CM), (3) no graft material. After surgery, the animals were sacrificed at 4 weeks and 8 weeks. Bone regeneration was analyzed in each section by micro-computerized tomography (${\mu}$-CT). And Hematoxylin and eosin stains were used for histological analysis. As measured by ${\mu}$-CT analysis 4 weeks after surgery, the average of new bone formation in animals treated with 3% 4-HR plus SM was greater than that of animals treated with CM. and the difference was statistically significant. And well organized lamella bones were observed in the histological view of the 3% 4-HR plus SM group. Therefore, more bone regeneration was seen in animals treated with 3% 4-HR plus SM than in those treated with CM or uncovered control.

• Journal of the Korea Furniture Society
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2007

Korea has a dark age in terms of culture in the last 20th century. Korea had been struggling between the Great Powers of the world in the imperialism and had sacrifice to keep our own culture itself. Japanese imperialist's a invasion, culture liquidation by Japan, Independence from Japan, Korean war and Influence by US are major bitter historical affair after close of Chosun Dynasty in the process of modernization. Therefore Korea couldn't stay in the center of world cultural core parts and was degraded as cultural consumption country which was provided oversea culture by other countries. Then Korea couldn't develop our unique traditional idea and culture. In the meantime there are both extreme phenomena; one is expulsion of other cultures absolutely and the other is only following western culture unconditionally like trimming policy in the end of colony age. These discreet and unfiltered western culture had been influenced Korea culture over the wide range strongly and resulted in cultural colony situation to produce western imitation culture without philosophy and traditional spirit. Even though Korea has met opportunity in the culture, we called "Han Trend", no formation of own culture is main reason for psychological panic. Korea furniture design is one of parts of lost of tradition culture and typical parts in reproducing western imitation culture. As a result furniture industry's major reason for loss value as exporting industry compared to other industries result in most of the furniture products without our unique identity. This situation become more deepen unfortunately. This report would like to suggest the direction of design with global competition capability and cultural identity to boost Korean furniture design industry by comparing, analyzing and speculating between design of Chosun dynasty and philosophy of modernism in western.

• Computers and Concrete
• /
• v.13 no.1
• /
• pp.49-70
• /
• 2014

Steel fiber-reinforced concrete (SFRC) is known as one of the efficient modern composites that can greatly enhance the material performance of cracked concrete in tension. Such improved tensile resistance mechanism at crack interfaces in SFRC members can be heavily influenced by methodologies of treatments of crack direction. While most existing studies have focused on developing the numerical analysis model with the rotating-angle theory, there are only few studies on finite element analysis models with the fixed-angle model approach. According to many existing experimental studies, the direction of principal stress rotated after the formation of initial fixed-cracks, but it was also observed that new cracks with completely different angles relative to the initial crack direction very rarely occurred. Therefore, this study introduced the direct tension force transfer model (DTFTM), in which tensile resistance of the fibers at the crack interface can be easily estimated, to the nonlinear finite element analysis algorithm with the fixed-angle theory, and the proposed model was also verified by comparing the analysis results to the SFRC shear panel test results. The secant modulus method adopted in this study for iterative calculations in nonlinear finite element analysis showed highly stable and fast convergence capability when it was applied to the fixed-angle theory. The deviation angle between the principal stress direction and the fixed-crack direction significantly increased as the tensile stresses in the steel fibers at crack interfaces increased, which implies that the deviation angle is very important in the estimation of the shear behavior of SFRC members.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.1
• /
• pp.21-24
• /
• 2001

Peucedanum japonicum $T_{HUNB}$ used as a edible and medicinal plants was investigated for in uitro regeneration. Callus formation occurred on leaf and stem explant cultures and showed spontaneous embryogenic and organogenic capability on MS basal medium supplemented with 0.1~5 mg/L NAA and 0~10 mg/L BA in dark. The regeneration was highest on the condition supplemented with 2.5 mg/L NAA and 10 mg/L BA. Development of the somatic embryo progressed through the globular, heart-shaped, torpedo-shaped and cotyledonary stage, typical of zygotic embryos. When the first somatic embryos was cultured on the medium supplemented with 0.2 mg/L NAA, secondary somatic embryo were induced with higher frequency on the hypocotyl then on the cotyledon and root.t.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.1-12
• /
• 2007

S45C steel has been widely used in industrial applications, such as crank shafts, gears, main spindles of machine tools, connecting rods, etc., because of its distinguished mechanical property. In the convention arc welding of S45C plates without heat treatments, it is possible for welding defects to take place, such as a void or a hot-crack, due to a high carbon composition of S45C. Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, single-pass thick section capability, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as power of laser and welding speed, on the characteristics of laser welding for the case of nickel coated and nickel uncoated S45C steel. As the result of the experiment, in case of butt welding, nickel coated S45C steel has a uniform formation of welding zone and it was judged that the welding nature was better as inner defects and the quantity of spatter were formed relatively fewer than nickel uncoated S45C steel.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.403-409
• /
• 2005

Mature nodal segments of 2-year-old greenhouse stock plant were cultured on Murashige and Skoog basal medium supplemented with the different kinds and various concentrations of cytokinins to produce multiple shoots in in vitro condition. The most adventitious shoots were produced from excised ends of nodal segments. The highest average number $(24.6\;{\pm}\;4.6)$ of shoots was produced with the combination of BA 1.0mg/L and TDZ 0.1mg/L in MS medium. In addition, several shoots were formed from lenticels of bark cambium with the same treatment. These concentrations promoted high shooting capability upto $94.6\%$ and NAA was the best cytokinin among five different PGR sources.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.59-65
• /
• 2001

Epoxy/$BaTiO_3$composite capacitor films with excellent stability at room temperature, uniform thickness, and electrical properties over a large area ware successfully fabricated. The composite capacitor films with good film formation capability and easy process ability were made from epoxy resin developed for ACF as a matrix and two kinds of $BaTiO_3$powders as fillers to increase the dielectric constant of the composite film. The crystal structure of the powders and its effects on dielectric constant of the films were investigated by X-ray diffraction (XRD). And the optimum amount of dispersant, phosphate ester, was determined by viscosity measurement of suspension. DSC and dielectric property tests were conducted to decide the right curing temperature and the optimum amount of the curing agent. As a result, the capacitors of 7 $\mu \textrm{m}$ thick film with 10 nF/$\textrm{cm}^2$ and low leakage current were successfully demonstrated.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2385-2392
• /
• 2012

The lack of effective treatment targets for triple-negative breast cancers make them unfitted for endocrine or HER2 targeted therapy, and their prognosis is poor. Transcription factor ER81, a downstream gene of the HER2, is highly expressed in breast cancer lines, breast atypical hyperplasia and primary breast cancers including triple-negative examples. However, whether and how ER81 affects breast cancer carcinogenesis have remained elusive. We here assessed influence on a triple-negative cell line. ER81-shRNA was employed to silence ER81 expression in the MDA-MB-231 cell line, and MTT, colony-forming assays, and flow cytometry were used to detect cell proliferation, colony-forming capability, cell cycle distribution, and cell apoptosis in vitro. MDA-MB-231 cells stably transfected with ER81-shRNA were inoculated into nude mice, and growth inhibition of the cells was observed in vivo. We found that ER81 mRNA and protein expression in MDA-MB-231 cells was noticeably reduced by ER81-shRNA, and that cell proliferation and clonality were decreased significantly. ER81-shRNA further increased cell apoptosis and the residence time in $G_0/G_1$ phase, while delaying tumor-formation and growth rate in nude mice. It is concluded that ER81 may play an important role in the progression of breast cancer and may be a potentially valuable target for therapy, especially for triple negative breast cancer.