• Structural Engineering and Mechanics
• /
• v.3 no.1
• /
• pp.25-34
• /
• 1995

General free vibration characteristics of cantilevered circular cylindrical tanks are analyzed using the integral equations technique with the cubic spline functions. For computations, the partial differential equations for thin shallow shells as given by Flugge's have been employed after the addition of the inertia forces. The application of the method is illustrated with a numerical examples of tanks which are free at the top edge and fixed at the bottom. The results obtained by this method have been compared with the available results and a good agreement was found.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.78-86
• /
• 2005

In this study, cantilever cylindrical shells with edge-stiffeners are analyzed. A versatile 4-node flat shell element which is useful for the analysis of shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. Three models by load conditions are considered. Model A, B and C are loaded by point load at the free edge, line load and external pressure respectively. A various parameter examples are presented to obtain proper stiffened length and stiffened thickness of edge-stiffeners. It is shown that the thickness of shell can be reduced more than 50% for Model A, about $20{\sim}30%$ for Model B by appropriate edge-stiffeners.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.2
• /
• pp.47-54
• /
• 2012

In this study, composite laminate cantilever type cylindrical shells with edge-stiffeners are analyzed. A versatile 4-node flat shell element which is useful for the analysis of shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. Two models by load conditions are considered. Load type A and B are loaded by point load at the free edge and line load respectively. A various parameter examples are presented to obtain proper stiffened length and stiffened thickness of edge-stiffeners. It is shown that the thickness of shell can be reduced minimum 30% by appropriate edge-stiffeners.

• Structural Engineering and Mechanics
• /
• v.13 no.5
• /
• pp.533-542
• /
• 2002

This paper considers the buckling and post-buckling behavior of empty metal storage tanks under wind load. The structures of such tanks may be idealized as cantilever cylindrical shells, and the structural response is investigated using a computational model. The modeling employs a doubly curved finite element based on a theory by Simo and coworkers, which is capable of handling large displacements and plasticity. Buckling results for tanks with four different geometric relations are presented to consider the influence of the ratios between the radius and the height of the shell (R/L), and between the radius and the thickness (R/t). The studies aim to clarify the differences in the shells regarding their imperfection-sensitivity. The results show that thin-walled short tanks, with R/L = 3, display high imperfection sensitivity, while tanks with R/L = 0.5 are almost insensitive to imperfections. Changes in the total potential energy of tanks that would buckle under the same high wind pressures are also considered.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.929-936
• /
• 1986

Free vibration characteristics of laminated orthotropic circular cylindrical shells with clamped free boundary condition are investigated. The solution is obtained through a direct solution procedure with axial mode displacements represented as simple Fourier series expressions. On the basis of the thin shell theories of Sanders, Love, Loo, Morley and Donnell, the 4*$ frequency determinant is derived and is expressed in a unified form. Various numerical examples determining the natural frequencies of circular cylindrical shells with isotropic material and also with layers of orthotropic elastic material arbitraily laminated either symmetrically or anti-symmetrically about the shell middle surface. The results obtained compared very well with some available experimental and numerical results.