• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.219-225
• /
• 2000

The major movement block of the containers have range between apron and designation points on yard in container terminal. The yard tractor operated by human takes charge of its movement in conventional container terminal. In automated container terminal, AGV(Automated Guided Vehicle) has charge of the yard tractor's role and the navigation path is ordered from upper level control system. The automated container terminal facilities must have the docking system to guide landing line to have high speed travelling and precision positioning. The general method for docking system uses the vision system with CCD camera, infra red, and laser. This paper describes the detection of AGV's position and orientation using laser slit beam to develop docking system.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.256-267
• /
• 2017

An active research area in computer vision, stereo matching is aimed at obtaining three-dimensional (3D) information from a stereo image pair captured by a stereo camera. To extract accurate 3D information, a number of studies have examined stereo matching algorithms that employ adaptive support weight. Among them, the adaptive census transform (ACT) algorithm has yielded a relatively strong matching capability. The drawbacks of the ACT, however, are that it produces low matching accuracy at the border of an object and is vulnerable to noise. To mitigate these drawbacks, this paper proposes and analyzes the features of an improved stereo matching algorithm that not only enhances matching accuracy but also is also robust to noise. The proposed algorithm, based on the ACT, adopts the truncated absolute difference and the multiple sparse windows method. The experimental results show that compared to the ACT, the proposed algorithm reduces the average error rate of depth maps on Middlebury dataset images by as much as 2% and that is has a strong robustness to noise.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.437-442
• /
• 2005

In this paper, we proposed the 2-dimensional inspection algorithm for micro-BGA(Ball Grid Array) device using a vision system. The proposed method uses the subpixel algorithm for high precision. The proposed algorithm preferentially extracts the package area of device in the input image. After the extraction of package area, each ball areas are extracted by ball search window method. The parameters for inspection are calculated for the extracted ball area. In the simulation results, we have the average error within $17{\mu}m$.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1881_1882
• /
• 2009

Simple quadratic potential functions for unicycle robot path planning are presented, where proposed algorithm for path planning has the different environment for each robot based on LOS(Line Of Sight) between a target and an obstacle, unlike a conventional path planning. In doing so, the proposed algorithm assumes that each swarm robot equips its own vision instead of a ceiling camera. In particular, this paper presents that each robot follows its different local leader. As a result proposed algorithm reduces local minimum problems by the help of each local leader.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.121-127
• /
• 2008

In this paper, we propose a new 3-D working point determination method for industrial robot using vision camera system and block interpolation technique with feature points in a vehicle body. To detect the feature points in a vehicle body, we applied the pattern matching method. For determination of working point, we applied block interpolation method. The block consists of 3-D type blocks with detected feature points per section. 3-D position is selected by Euclidean distance between 245 feature values and an acquired feature point. In order to evaluate the proposed algorithm, experiments are performed in glass equipment process in real industrial vehicle assembly line.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1830-1835
• /
• 2015

In this paper, we propose an algorithm for the automatic registration of two rigid parts using multiple 3D sensor systems on a robot. Four sets of structured laser stripe system consisted of a camera and a visible laser stripe is used for the acquisition of 3D information. Detailed procedures including extrinsic calibration among four 3D sensor systems and hand/eye calibration of 3D sensing system on robot arm are presented. We find a best pose using search-based pose estimation algorithm where cost function is proposed by reflecting geometric constraints between sensor systems and target objects. A pose with minimum gap and height difference is found by greedy search. Experimental result using demo system shows the robustness and feasibility of the proposed algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.120-127
• /
• 2003

A novel three degrees of freedom sensing method utilizing binary grid pattern image and vision camera is presented. The binary grid pattern image is designed by Pseudo-Random Binary Arrays and referenced to encode in-plane position of a moving stage of the contact-free planar actuator. First, the yaw motion of the stage is detected using fast image processing and then the other planar positions, x and y, are decoded with a sequence of images. This method can be applied to the system that needs feedback of in-plane position, with advantages of a good accuracy and high resolution comparable with the encoder, a relatively compact structure, no friction, and a low cost. In this paper, all the procedures of the above sensing mechanism are described in detail, including simulation and experiment results.

• International Journal of Contents
• /
• v.9 no.4
• /
• pp.16-21
• /
• 2013

Vision system is an indispensable part of constructing the chess-playing robot. Chessboard detection and pieces localization in the captured image of robot's camera are important steps for processes followed such as pieces recognition, move calculation, and robot controlling. We present a method for detecting the Janggi chessboard and pieces based on the edge and color feature. Hough transform combined with line extraction is used for segmenting the chessboard and warping it to form the rectangle shape in order to detect and interpolate the lines of chessboard. Then we detect the existence of pieces and their side by applying the saliency map and checking the color distribution at piece locations. While other methods either work only with the empty chessboard or do not care about the piece existence, our method could detect sufficiently side and position of pieces as well as lines of the chessboard even if the occlusion happens.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.439-448
• /
• 2003

An image processing algorithm was developed for a robot system which was used in gene study. The robot system achieved a job of colony picking. The colony included DNA of an organism. The robot picked up the colony in petri-dish, which included the cultivated colony in medium, by a picking pin, and moved the colony to wellplates. The vision system consisted of an image acquisition system which acquired the image information of colony, an illumination device which irradiated the object once when it got the image of it, a computer and so on. The image processing algorithm distinguished the colony and detected colony positions. Performance test of the developed algorithm showed that the distinguishing success rate of colony and detecting success rate of colony positions were over 96%.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.285-290
• /
• 1998

Growth information of crops is essential for efficient control of greenhouse environment. However, a few non-invasive and continuous monitoring methods of crop growth has been developed. A computer vision system with a CCD camera and a frame grabber was developed to conduct non-destructive and intact plant growth analyses. The developed system was evaluated by conducting the growth analysis of lettuce. A linear model that explains the relationship between the relative crop coverage by the crop canopy and dry weight of a lettuce was presented. It was shown that this measurement method could estimate the dry weight from the relative crop coverage by the crop canopy. The result also showed that there was a high correlation between the projected top leaf area and the dry weight of the lettuce.