• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2003

We have developed a seeing monitoring system and measured seeing variation of the Bohyunsan Optical Astronomy Observatory (BOAO) and the Sobaeksan Optical Astronomy Observatory (SOAO) using a small telescope system. Our seeing monitoring system is similar to the differential image motion monitor (DIMM) installed at the ESO. The ooly difference between the BOAO and the SOAO seeing monitoring system is a detector system, a video camera at the BOAO and ST-4 camera at the SOAO. We confirmed that the seeing monitoring system at the SOAO can measure average seeing size inspite of its simple detector system. From the BOAO seeing measurement, we found that the seeing size changes fast. We expect that our seeing monitoring system could be used for real time seeing monitoring after some improvement, and the data to be obtained would be very useful when we build adaptive optic system in the future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1365-1373
• /
• 1994

Elasto-dynamic deformation of flexible linkage mechanism was analyzed using the finite element method. A computer program was constructed and applied to analyze a specific crank-level 4-bar mechanism, in which the elasto-dynamic deformation of the mechanism system was obtained using mode superposition method in the case of constant input speed and the effect of geometric stiffness on the mechanism is included. Experimental verification of numerical results was conducted by measuring the elasto-dynamic deformation of mid-points of coupler and lever for the 4-bar lingkage mechanism using high speed camera and image data processing systeem. For the elasto-dynamic deformation at the lever mid-point, the numerical results including geometric stiffness almost agree with the experimental ones. However, the numerical results excluding geometric stiffness good agree with the experimental ones at the couper mid-point.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.41-46
• /
• 2001

The flow induced by a vertically impinging circular jet under a horizontal plate is investigated by visualization technique, using kerosene smoke in nitrogen gas to visualize the vortex flow and impinging flow. The light source was the sheet beam of Ar-Ion laser. The vertical and horizontal images scattering of kerosene smoke were recorded by the high speed CCD camera and the video camera. The instantaneous velocity of the vortex and the mean velocity of the smoke front were measured from the acquisited images.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.874-879
• /
• 1992

It is shown that there exists a nonlinear mappping which transforms features and their changes to the desired camera motion without measurement of the relative distance between the camera and the part, and the nonlinear mapping can eliminate several difficulties encountered when using the inverse of the feature Jacobian as in the usual feature-based visual feedback controls. And instead of analytically deriving the closed form of such a nonlinear mapping, a fuzzy membership function (FMF) based neural network is then proposed to approximate the nonlinear mapping, where the structure of proposed networks is similar to that of radial basis function neural network which is known to be very useful in function approximations. The proposed FMF network is trained to be capable of tracking moving parts in the whole work space along the line of sight. For the effective implementation of proposed IMF networks, an image feature selection processing is investigated, and required fuzzy membership functions are designed. Finally, several numerical examples are illustrated to show the validities of our proposed visual servoing method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.4
• /
• pp.268-273
• /
• 2003

In the present study, the characteristics of upward bubble flow were experimentally investigated in a liquid bath. An electro-conductivity probe was used to measure local volume fraction and bubble frequency. Since the gas is concentrated at the near nozzle, the flow parameters are high near the nozzle. In general their axial and radial values tended to decrease with increasing distance. For visualization of flow characteristics, a Particle Image Velocimetry (P.I..V) and a thermo-vision camera were used in the present study. The experimental results show that heat transfer from bubble surface to water is largely completed within z=10mm from the nozzle, and then the temperature of bubble surface reaches that of water rapidly. Due to the centrifugal force, the flow was more developed near the wall than at bubble-water plume. Vortex flow in the bottom region was relatively weaker than that in the upper region.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.173-177
• /
• 1992

The Helicopter has a lot of flight modes. The most characteristic flight mode is Hovering. It enables the helicopter to be used in many situations. However, a helicopter has nonlinear dynamics so its mathematical modeling is very difficult. Hence it is not easy to control helicopter in hover. In this paper, RC model helicopter is selected as a plant. To stabilize the behavior of RC model helicopter, Fuzzy alogrithm is used as a controller and one camera is used as a sensor. To get proper Information from camera Image, three characteristic points are attatched to the helicopter and a position recognition algorithm is developed. Experiments are performed to stabilize 3 rotational motions synchronousely with fuzzy control algorithm. As a result, Fuzzy control represents better performances than the conventional PID control.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.43.3-44
• /
• 2017

We report the operational highlights of KMTNet in the point of observing rate, image pre-processing and data reduction, observing run for each science program, and scientific publications performed in 2016. Major system upgrade has been conducted in the CCD camera and the wide field telescope optics: the post amp and readout electronics of the 18k Mosaic CCD camera at Siding Spring Observatory site has been fine tuned and the protected silver coat of the primary mirror has been replaced with the bare aluminium coat due to the degradation of reflectivity of the primary mirror surface. A plan of KMTNet observation system improvement for 2017 will be introduced in this talk.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.753-758
• /
• 1998

본 논문은 카메라 파라메터의 측정오차에 대하여 강인성을 보이는 새로운 로봇의 스테레오 시각 위치제어 알고리즘을 제시한다. 제시된 알고리즘은 카메라로부터 측정된 영상 데이터만을 이용함으로써, 특히 파라메터 측정오차에 대하여 매우 민감함을 보이는 영상 데이터로부터 작업 공간에서의 위치로의 변환, 즉 역변환 추정장치의 필요성을 제거하였다. 이러한 특징이 기존 개발된 시각 제어기와의 큰 차이를 두고 있다. 그럼에도 불구하고 제시된 제어기는 전 작업 영역 내에서 시스템 안정성을 갖는다. 또한 카메라의 위치 측정 오차에 대하여 전혀 영향을 받지 않음이 증명되어지고 방향 폭정 오류에 대해서도 기존 제어기보다 강인함을 시뮬레이션을 통하여 보여진다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.974-978
• /
• 2013

AVI (Automatic Vision Inspection) systems automatically detect defect features and measure their sizes via camera vision. AVI systems usually report different measurements on the same defect with some variations on position or rotation mainly because different images are provided. This is caused by possible variations from the image acquisition process including optical factors, nonuniform illumination, random noises, and so on. For this reason, conventional area based defect measuring methods have problems of robustness and consistency. In this paper, we propose a new defect size measuring method to overcome this problem, utilizing volume information that is completely ignored in the area based defect measuring method. The results show that our proposed method dramatically improves the robustness and consistency of defect size measurement.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.107-110
• /
• 2003

In this paper, we propose sharing 3D media between multisite using enhanced Access Grid (e-AG) which is a composition of 3D display and Access Grld (AG) Conventional AG and other collaborative systems have a limitation to share immersive 3D media Thus, proposed system supports sharing 3D media contents in a AG meeting section. Real object can be shared by acquiring stereo image with pre-calibrated stereo camera and by delivering, and virtual object can be shared by transmitting state information after downloading 3D model. And also, real video scene acquired by stereo camera and virtual object from 3D model can be displayed on the 3D display system of each node adaptively. The characteristics of proposed sharing method are sharing 3D media, displaying 3D media on a system adaptively, supporting real-time interaction. The proposed sharing method will be used remote lecture, remote collaboration with 3D media.