• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.839-841
• /
• 1999

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.274-279
• /
• 2008

Roll to roll (R2R) manufacturing process, also known as 'web processing', has been tried for producing electronic devices on a flexible plastic or metal foil. To increase the performance and productivity the R2R process, effective control and on-line supervision for web quality becomes very important. Wrinkle is one of the defects, which is incurred due to compressive stresses. A system for on-line measurement of wrinkle is developed using area scan camera and machine vision laser. The 2D image, obtained by area scan camera, is produced by Gaussian regression method to characterize the wrinkle on a transparent web. The experiment proves that 0.3mm wrinkle height can be measured successfully with 74fps.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.4 s.15
• /
• pp.55-61
• /
• 2004

Rapid developments in sensor technologies now allow the generation of multi-source topographical data. For many applications, however, the geospatial information provided by individual sensors is not complete, precise, and consistent. To solve these inherent problems, additional diverse sources of complementary data can be used and fused. In this paper, the experiment was done for generation of 3D orthoimage data using LIDAR data and digital camera image. And the results show that 3D orthoimage can be used for the flood monitoring.

• The Journal of Korea Robotics Society
• /
• v.4 no.4
• /
• pp.312-319
• /
• 2009

This paper proposes a low-complexity indoor localization method of mobile robot under the dynamic environment by fusing the landmark image information from an ordinary camera and the distance information from sensor nodes in an indoor environment, which is based on sensor network. Basically, the sensor network provides an effective method for the mobile robot to adapt to environmental changes and guides it across a geographical network area. To enhance the performance of localization, we used an ordinary CCD camera and the artificial landmarks, which are devised for self-localization. Experimental results show that the real-time localization of mobile robot can be achieved with robustness and accurateness using the proposed localization method.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.905-907
• /
• 2005

In this paper, we propose the system that can monitor and control the camera in the remote place using the PDA. The server PC attached to the PLC (Programmable Logic Controller) acquires the current status (On/Off) of the devices through the RS-232 serial communications. Also, the moving image frames captured from the wireless camera is compressed in the JPEG format and is stored in the server. The PDA, which is connected to the server through wireless internet, receives the data about the status of the devices and controls the devices according to the circumstances of them. Also, it can receive the images from the server simultaneously. So, we ran monitor and control the specified area in the remote place using the PDA through the wireless communication.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.202-204
• /
• 2006

In this paper, the detection scheme of the spatial coordinates based on stereo camera for a Transformation algorithm of an Leg-wheel Hexapod Robot is proposed. Robot designed as can have advantages that do transfer possibility fast mobility in flat topography and uneven topography through walk that use wheel drive. In the proposed system, using the disparity data obtained from the left and right images captured by the stereo camera system and the perspective transformation between a 3-D scene and an image plane, depth information can be detected. Robot uses construed environmental data and transformation algorithm, decide wheel drive and leg waik, and can calculate width of street and regulate width of robot.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3117-3119
• /
• 2005

In this paper, we propose the system that can monitor and control the camera in the remote place using the PDA. The server PC attached to the PLC (Programmable Logic Controller) acquires the current status (On/Off) of the devices through the RS-232 serial communications. Also, the moving image frames captured from the wireless camera is compressed in the JPEG format and is stored in the server. The PDA, which is connected to the server through wireless internet, receives the data about the status of the devices and controls the devices according to the circumstances of them. Also, it can receive the images from the server simultaneously. So, we can monitor and control the specified area in the remote place using the PDA through the wireless communication.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.33-35
• /
• 2005

We propose an eye gaze tracking system under natural head movements. The system consists of one CCD camera and two front-surface mirrors. The mirrors rotate to follow head movements in order to keep the eye within the view of the camera. However, the mirror controller cannot guarantee the fast head movements, because the frame rate is generally 30Hz. To overcome this problem, we applied Kalman predictor to estimate next eye position from the current eye image. In the results, our system allows the subjects head to move 50cm horizontally and 40cm vertically, with the speed about 10cm/sec and 6cm/sec, respectively. And spatial gaze resolutions are about 4.5 degree and 4.5 degree, respectively, and the gaze estimation accuracy is 92% under natural head movements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.02a
• /
• pp.122-123
• /
• 1994

RHEED ppattern을 C.C.D Camera를 이용하여 관측한 후 C.C.D outpput signal을 Frame Garbber를 이용하여 Digitize하였다. Digitize된 RHEED ppattern의 정보로부터 원하는 Sppot의 intensity를 Image pprocessing Software를 개발하여 측정할 수 있다. [그림 1] 특히 thin film growth를 monitor하기 위하여 RHEED diffraction Sppot의 Intensity oscillation을 측정할 경우 실시간 측정이 필요하며 이를 위해 매우 빠른 속도의 data aquisition과 dispplay를 필요로 한다. 그림2는 이런 조건을 만족하는 software를 개발하여 실시간으로 측정한 AlGaAs/GaAs. multilayer RHEED Oscillation을 보여주고 있다. 이 실험은 매우 간단하고, 특별한 주의를 요하지 않으며, 측정되는 RHEED Sppot을 눈으로 동시에 관찰할 수 있어 실험 상황을 좀더 쉽게 monitor할 수 있게 해준다. 또한 data-aquitition. data-analysis, data-dispplay를 한 대의 compputer를 이용해 손쉽고 값싸게 할 수 있으므로, opptical fiber와 pphoto-diode, X-Y recorder등을 동원한 기존의 번잡한 실험을 대체할 수 있을 것이다.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.4
• /
• pp.7-13
• /
• 2005

We developed an accurate and reliable photogrammetric method available instead of the direct measurement method and the three-dimensional scanning method. Our research was restricted to a head on the body. Approaching three-dimensionally, we calibrated a distorted image of a photograph and got linear equations of camera beams. Then we assigned z values of landmarks in the head and obtained three-dimensional coordinates for each landmark putting those z values in linear equations of camera beams and finally could calculate measurement results from those three-dimensional coordinates. When we compared results obtained by a program, 'Venus Face Measurement(VFM)' that we had developed applying our method with results obtained by the direct measurement method, VFM showed very accurate and reliable results. In conclusion the photogrammetric method developed in this study was testified to an outstanding measurement method as a substitute for the direct measurement method and the three-dimensional scanning method.