• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.7-15
• /
• 1998

In this paper a calibration method is proposed for calibrating distorted image from lens and various factors. The similar origin image can be generated by the proposed method that calculate a calibration coefficient by modeling third transformation between standard image and distorted image and then apply the coefficient to distorted image The coefficient is effective until camera position is changed or lens is exchanged. This research consists of processes to calculate calibration coefficient and to set similar real image by the coefficient. Proposed method especially is applied to a system to obtain a real image from a distorted image causing effects of special system environment and camera lens The advantage of this method is verified by experiment using distorted images from a CCD camera that will attach atomic pile.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.294-298
• /
• 2009

In this study, we proposes the method to improve the quality of the image through the edge extraction more delicately. Our method is named ESII(Edge Sensitive Image Interpolation) and doesn't use the fixed parameter of the interpolation kernel. However, it changes the parameter of pixel which is interpolated to the high definition image using the proper information from the surrounding pixels. It reconstructs the image by using the LSE(Least Square Error) and determining the pixel values to make the CME(Camera Modelling Error) minimized. Compared to the conventional methods, suggested method shows the higher quality of subjective and objective image definition and lessons the computational complexity by separating the image into 1-D data.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.85-92
• /
• 2005

This paper describes the recognition method of small-obstacles using a camera for a mobile robot in indoor environment. The technique of image processing using a camera has been widely used for an automaton of industrial system, an inspection of inferior goods, a lookout of an invader, and a vision sensor of intelligent robot. Mobile robot could meet small-obstacles such as a small plastic bottle of about 0.5 l in quantity, a small box of $7{\times}7{\times}7cm^3$ in volume, and so on in its designated path, and could be disturbed by them in the locomotion of a mobile robot. So, it is necessary to research on the recognition of small-obstacles using a camera and program. In this paper, 2-D image processing algorism and method fur recognition of small-obstacles using a camera for a mobile robot in indoor environment was developed. The characteristic test of the developed program to confirm the recognition of small-obstacles was performed. It is shown that the developed program could judge the size and the position of small-obstacles accurately.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1590-1591
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV camera. UV camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The UV camera was developed and measured using a UV image, as applied voltage increased ultraviolet images of the phenomenon could be obtained. And we investigated properties of UV corona image on insulator in salt water environments. From the results, the breakdown voltage was decreased and UV images were taken at low voltages and the UV image is rapidly increased with increasing High voltage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.475-483
• /
• 2015

This study examined the feasibility of using an automatic lens distortion correction (ALDC) camera as the payload for a photogrammetric unmanned aerial vehicle (UAV) system. First, lens distortion for the interior orientation (IO) parameters was estimated. Although previous studies have largely ignored decentering distortion, this study revealed that more than 50% of the distortion of the ALDC camera was caused by decentering distortion. Second, we compared the accuracy of bundle adjustment for camera calibration using three image types: raw imagery without the ALDC option; imagery corrected using lens profiles; and imagery with the ALDC option. The results of image triangulation, the digital terrain model (DTM), and the orthoimage using the IO parameters for the ALDC camera were similar to or slightly better than the results using self-calibration. These results confirm that the ALDC camera can be used in a photogrammetric UAV system using only self-calibration.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1178-1183
• /
• 2021

Based on the camera movement on image expression and grammar, this study intended to analyze the characteristics of image expression filmed and broadcasted by drones. This study analyzed drone images using the movement characteristics of existing video cameras as a coding nomenclature. These were intended to examine the differences from existing video grammar and their implications. This study conducted a content analysis using the entire population of drone news footage broadcast for four years in 2015, 2016, 2017 and 2018 by TV Chosun. The size of the screen, camera work, duration of the shot, camera angle, etc. were selected and analyzed. As a result, the drone camera work showed that it uses the most dolly shots in the case of camera movement, followed by the drone camera movement in the order of pan and tilt shots. For zoom, the frequency of use was the smallest. In addition, this study analyzed the size of the screen, duration of the shot, and camera angle of drone. Analysis shows that drones use certain camera movements most frequently, and unlike grandiose modifiers such as "extension of human gaze," drone remains as a supplementary means to enhance the traditional media expression.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2003

The image-based 3D modeling is the technique of generating a 3D graphic model from images acquired using cameras. It is being researched as an alternative technique for the expensive 3D scanner. In this paper, we propose the image-based, 3D modeling system using calibrated stereo cameras. The proposed algorithm for rendering, 3D model consists of three steps, camera calibration, 3D reconstruction, and 3D registration step. In the camera calibration step, we estimate the camera matrix for the image aquisition camera. In the 3D reconstruction step, we calculate 3D coordinates using triangulation from corresponding points of the stereo image. In the 3D registration step, we estimate the transformation matrix that transforms individually reconstructed 3D coordinates to the reference coordinate to render the single 3D model. As shown the result, we generated relatively accurate 3D model.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.430-436
• /
• 2022

In this paper, we propose an intelligent camera for multiple body temperature detection. The proposed camera is composed of optical(4056*3040) and thermal(640*480), which detects abnormal symptoms by analyzing a person's facial expression and body temperature from the acquired image. The optical and thermal imaging cameras are operated simultaneously and detect an object in the optical image, in which the facial region and expression analysis are calculated from the object. Additionally, the calculated coordinate values from the optical image facial region are applied to the thermal image, also the maximum temperature is measured from the region and displayed on the screen. Abnormal symptom detection is determined by using the analyzed three facial expressions(neutral, happy, sadness) and body temperature values. In order to evaluate the performance of the proposed camera, the optical image processing part is tested on Caltech, WIDER FACE, and CK+ datasets for three algorithms(object detection, facial region detection, and expression analysis). Experimental results have shown 91%, 91%, and 84% accuracy scores each.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.268-271
• /
• 2017

In this paper, we propose the development of high resolution $360^{\circ}$ omnidirectional IP camera with 12 million pixels. The proposed 12-megapixel high-resolution $360^{\circ}$ omnidirectional IP camera consists of a lens unit with $360^{\circ}$ omnidirectional viewing angle and a 12-megapixel high-resolution IP camera unit. The lens section of $360^{\circ}$ omnidirectional viewing angle adopts the isochronous lens design method and the catadioptric facet production method to obtain the image without peripheral distortion which is inevitably generated in the fisheye lens. The 12 megapixel high-resolution IP camera unit consists of a CMOS sensor & ISP unit, a DSP unit, and an I / O unit, and converts the image input to the camera into a digital image to perform image distortion correction, image correction and image compression And then transmits it to the NVR (Network Video Recorder). In order to evaluate the performance of the proposed 12-megapixel high-resolution $360^{\circ}$ omnidirectional IP camera, 12.3 million pixel image efficiency, $360^{\circ}$ omnidirectional lens angle of view, and electromagnetic certification standard were measured.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.167-175
• /
• 2002

Image Mosaicing creates a new image by composing video frames or still images that are related, and performed by arrangement, composition and redundancy analysis of images. This paper proposes a hierarchical image mosaicing system using camera and object parameters far efficient video database construction. A tree-based image mosiacing has implemented for high-speed computation time and for construction of static and dynamic image mosaic. Camera parameters are measured by using least sum of squared difference and affine model. Dynamic object detection algorithm has proposed for extracting dynamic objects. For object extraction, difference image, macro block, region splitting and 4-split detection methods are proposed and used. Also, a dynamic positioning method is used for presenting dynamic objects and a blurring method is used for creating flexible mosaic image.