• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2415-2423
• /
• 1999

We propose a new optical method which conceals the data of authorized persons by encryption before they are stored or compared in the pattern recognition system for security systems. This proposed security system is made up of two subsystems : a proposed optical encryption system and a pattern recognition system based on the JTC which has been shown to perform well. In this system, each image of authorized persons as a reference image is stored in memory units through the proposed encryption system. And if a fingerprint image is placed in the input plane of this security system for access to a restricted area, the image is encoded by the encryption system then compared with the encrypted reference image. Therefore because the captured input image and the reference data are encrypted, it is difficult to decrypt the image if one does not know the encryption key bit stream. The basic idea is that the input image is encrypted by performing optical XOR operations with the key bit stream that is generated by digital encryption algorithms. The optical XOR operations between the key bit stream and the input image are performed by the polarization encoding method using the polarization characteristics of LCDs. The results of XOR operations which are detected by a CCD camera should be used as an input to the JTC for comparison with a data base. We have verified the idea proposed here with computer simulations and the simulation results were also shown.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.76-80
• /
• 2018

In recent years, with the development of automobile technology, smart system technology that assists safe driving has been developed. A camera is installed on the front and rear of the vehicle as well as on the left and right sides to detect and warn of collision risks and hazards. Beyond the technology of simple black-box recording via cameras, we are developing intelligent systems that combine various computer vision technologies. However, most related studies have been developed to optimize performance in laboratory-like environments that do not take environmental factors such as weather into account. In this paper, we propose a method to detect object by restoring visibility in image with degraded image due to weather factors such as fog. First, the image quality degradation such as fog is detected in a single image, and the image quality is improved by restoring using an intermediate value filter. Then, we used an adaptive feature extraction method that removes unnecessary elements such as noise from the improved image and uses it to recognize objects with only the necessary features. In the proposed method, it is shown that more feature points are extracted than the feature points of the region of interest in the improved image.

• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.124-129
• /
• 2006

We have developed a compact and cost-effective camera module on the basis of wafer-scale-replica processing. A multiple-layered structure of several aspheric lenses in a mobile-phone camera module is first assembled by bonding multiple glass-wafers on which 2-dimensional replica arrays of identical aspheric lenses are UV-embossed, followed by dicing the stacked wafers and packaging them with image sensor chips. This wafer-scale processing leads to at least 95% yield in mass-production, and potentially to a very slim phone with camera-module less than 2 mm in thickness. We have demonstrated a VGA camera module fabricated by the wafer-scale-replica processing with various UV-curable polymers having refractive indices between 1.4 and 1.6, and with three different glass-wafers of which both surfaces are embossed as aspheric lenses having $230{\mu}m$ sag-height and aspheric-coefficients of lens polynomials up to tenth-order. We have found that precise compensation in material shrinkage of the polymer materials is one of the most technical challenges, in orderto achieve a higher resolution in wafer-scaled lenses for mobile-phone camera modules.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1239-1249
• /
• 2003

Gaze detection is to locate the position on a monitor screen where a user is looking by computer vision. Previous gaze detection system uses a wide view camera, which can capture the whole face of user. However, the image resolution is too low with such a camera and the fine movements of user's eye cannot be exactly detected. So, we implement the gaze detection system with a wide view camera and a narrow view camera. In order to detect the position of user's eye changed by facial movements, the narrow view camera has the functionalities of auto focusing and auto pan/tilt based on the detected 3D facial feature positions. As experimental results, we can obtain the facial and eye gaze position on a monitor and the gaze position accuracy between the computed positions and the real ones is about 3.1 cm of RMS error in case of Permitting facial movements and 3.57 cm in case of permitting facial and eye movement. The processing time is so short as to be implemented in real-time system(below 30 msec in Pentium -IV 1.8 GHz)

• Smart Structures and Systems
• /
• v.25 no.2
• /
• pp.135-153
• /
• 2020

There has been a sustained interest towards the non-contact structural displacement measurement by means of videogrammetric technique. On the way forward, one of the major concerns is the spurious image drift induced by temperature variation. This study therefore carries out an investigation into the temperature effect of videogrammetric technique, focusing on the exploration of the mechanism behind the temperature effect and the elimination of the temperature-caused measurement error. 2D videogrammetric measurement tests under monotonic or cyclic temperature variation are first performed. Features of measurement error and the casual relationship between temperature variation and measurement error are then studied. The variation of the temperature of digital camera is identified as the main cause of measurement error. An excellent linear relationship between them is revealed. After that, camera parameters are extracted from the mapping between world coordinates and pixels coordinates of the calibration targets. The coordinates of principle point and focal lengths show variations well correlated with temperature variation. The measurement error is thought to be an outcome mainly attributed to the variation of the coordinates of principle point. An approach for eliminating temperature-caused measurement error is finally proposed. Correlation models between camera parameters and temperature are formulated. Thereby, camera parameters under different temperature conditions can be predicted and the camera projective matrix can be updated accordingly. By reconstructing the world coordinates with the updated camera projective matrix, the temperature-caused measurement error is eliminated. A satisfactory performance has been achieved by the proposed approach in eliminating the temperature-caused measurement error.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.177-187
• /
• 2009

This paper describes a automatic video surveillance system(AVSS) with long range and 360$^{\circ}$ coverage that is automatically rotated in an elevation over azimuth mode in response to the TTM(tracked target message) signal of vessels tracked by ARPA(automatic radar plotting aids) radar. This AVSS that is a video security and tracking system supported by ARPA radar, CCTV(closed-circuit television) camera system and other sensors to automatically identify and track, detect the potential dangerous situations such as collision accidents at sea and berthing/deberthing accidents in harbor, can be used in monitoring the illegal fishing vessels in inshore and offshore fishing ground, and in more improving the security and safety of domestic fishing vessels in EEZ(exclusive economic zone) area. The movement of the target vessel chosen by the ARPA radar operator in the AVSS can be automatically tracked by a CCTV camera system interfaced to the ECDIS(electronic chart display and information system) with the special functions such as graphic presentation of CCTV image, camera position, camera azimuth and angle of view on the ENC, automatic and manual controls of pan and tilt angles for CCTV system, and the capability that can replay and record continuously all information of a selected target. The test results showed that the AVSS developed experimentally in this study can be used as an extra navigation aid for the operator on the bridge under the confusing traffic situations, to improve the detection efficiency of small targets in sea clutter, to enhance greatly an operator s ability to identify visually vessels tracked by ARPA radar and to provide a recorded history for reference or evidentiary purposes in EEZ area.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.1-12
• /
• 2014

The projection mapping technique is used in various ways in almost every genre of performance arts at the moment. Thus, artist from various areas are participated in contents productions using it. The diversification of projection mapping contents gave producers a clue to try fresher visual effects and it was connected to the change of point of time using the camera working which was never used in old projection mapping contents productions. It is analyzed that the use of camera workings in the projection mapping image maximizes the visual Tactility and helps audiences concentrate on the contents. This study performed the theoretical research on the 'camera working' which is a new visual expression of the projection mapping and analyzed cases of projection mapping works applying them. It is to reconstruct the camera working which has been applied only by images of movies and suggest a guideline to create the optimized visual effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.158-164
• /
• 2009

The real time security system using web camera shall correspond in commensurate with it in real time through classifying moving object and analyzing the behavior. But, as to the detection of moving object in real time image through a camera, it is difficult to detect movement correctly according to the change of unnecessary noises, lighting conditions and screened phenomenon. This paper proposes real time security system by dual camera and ultrasonic sensor, a method of advanced detection in order to detect correct movement of specific object. That is, we could improve the tracing characteristics by using ultrasonic sensor as measurement factor of changed position and verify through experiments that the information interchanged between camera upwards and in front of it have effect on tracing a specific object continuously. The results of the experiment show that recognition rate of object was 97.4% and the correct tracing could be done lastingly in a phenomena of screening object.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.4
• /
• pp.177-186
• /
• 2015

For data fusion of laser range finder (LRF) and vision camera, accurate calibration of external parameters which describe relative pose between two sensors is necessary. This paper proposes a new calibration method which can acquires more accurate external parameters between a LRF and a vision camera compared to other existing methods. The main motivation of the proposed method is that any corner data of a known 3D structure which is acquired by the LRF should be projected on a straight line in the camera image. To satisfy such constraint, we propose a 3D geometric model and a numerical solution to minimize the energy function of the model. In addition, we describe the implementation steps of the data acquisition of LRF and camera images which are necessary in accurate calibration results. In the experiment results, it is shown that the performance of the proposed method are better in terms of accuracy compared to other conventional methods.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.148-155
• /
• 2009

In this paper, we analysed what effect the design variables, such as refractive index, central thickness and radius of curvature, had on the first order properties and image quality of optical systems when temperature changed. The optical parameters were varied at each temperature, then the coupling and ruler methods were used to design an athermalized lens for a phone camera. This concept was first used to design the lens for a 1/3.2" 5M phone camera. The designed lens satisfies all the specifications for a phone camera, and the variations of the back focal length(${\Delta}BFL$) are reduced to $10{\mu}m$ for a temperature range of $-10^{\circ}C$ to $+60^{\circ}C$. Also, the TTL of 5.5 mm results in a compact system. All design concepts and results discussed in this paper are expected to be useful in development for the phone and CCTV camera.