• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.285-296
• /
• 2010

Robot-assisted illuminating equipment based on image-processing technology was developed and then its accuracy was measured. The current system was designed to detect facial appearance using a camera and to illuminate it using a robot-assisted system. It was composed of a motion control component, a light control component and an image-processing component. Images were captured with a camera and following their acquisition the images that showed motion change were extracted in accordance with the Adaboost algorithm. Following the detection experiment for the oral cavity of patients based on image-processing technology, a higher degree of the facial recognition was obtained from the frontal view and the light robot arm was stably controlled.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.20-32
• /
• 2010

Previous hardware devices to capture human motion have many limitations; expensive equipment, complexity of manipulation or constraints of human motion. In order to overcome these problems, real-time motion capture algorithms based on computer vision have been actively proposed. This paper presents an efficient analysis method of multiple view images for real-time motion capture. First, we detect the skin color regions of human being, and then correct the image coordinates of the regions by using camera calibration and epipolar geometry. Finally, we track the human body part and capture human motion using kalman filter. Experimental results show that the proposed algorithm can estimate a precise position of the human body.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.918-931
• /
• 2013

The conventional object tracking techniques using PTZ camera detects object movements by analyzing acquired image. However, this technique requires expensive hardware devices to perform a complex image processing. And it is occasionally hard to detect object movements, if an acquired image is low quality or image acquisition is impossible. In this paper, we proposes a smart security CCTV system applying to wireless sensor network technique based on IEEE 802.15.4 standard to overcome the problems of conventional object tracking technique, which enables to track suspicious objects by detecting object movements and GPS data in sensor node. This system enables an efficient control of PTZ camera to observe a wide area, decreasing image processing complexity. Also, wireless sensor network is implemented using mesh networks to increase the efficiency of installing sensor node.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2013

This study focuses on the determination of optimal photographing angle and overlapping ratio for automatic image stitching system using a non-metric camera module with motorized head. Photographing overlap was calculated considering the angle of view on different kinds of lenses and moving angle of motorized head per each option, and optimal photographing angle and overlapping ratio could be determined through the experimental result using the operating time, data volume and performance of image stitching. Through this experiment, we could find that it was effective to take a picture with $36^{\circ}$ of interval(33.82% of overlap) in vertical direction and $24^{\circ}$ or $30^{\circ}$ of interval(36.51% or 20.63% of overlap) in horizontal direction using 35mm lens for automatic image stitching system.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1131-1138
• /
• 2006

This paper proposes a novel method for grading of underground communication conduits by laser projection image analysis. The equipment thrust into conduit consists of a laser diode, a light emitting diode and a camera, the laser diode is utilized for generating projection image onto pipe wall, the light emitting diode for lighting environment and the image of conduit is acquired by the camera. In order to segment profile region, we used a novel color difference model and multiple thresholds method. The shape of profile ring is represented as a minimum diameter and the Fourier descriptor, and then the pipe status is graded by the rule-based method. Both local and global features of the segmented ring shaped, the minimum diameter and the Fourier descriptor, are utilized, therefore injured and distorted pipes can be correctly graded. From the experimental results, the classification is measured with accuracy such that false alarms are less than 2% under the various conditions.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.227-233
• /
• 2017

Purpose: Morphological properties of soybean roots are important indicators of the vigor of the seed, which determines the survival rate of the seedlings grown. The current vigor test for soybean seeds is manual measurement with the human eye. This study describes an application of a machine vision technique for rapid measurement of soybean seed vigor to replace the time-consuming and labor-intensive conventional method. Methods: A CCD camera was used to obtain color images of seeds during germination. Image processing techniques were used to obtain root segmentation. The various morphological parameters, such as primary root length, total root length, total surface area, average diameter, and branching points of roots were calculated from a root skeleton image using a customized pixel-based image processing algorithm. Results: The measurement accuracy of the machine vision system ranged from 92.6% to 98.8%, with accuracies of 96.2% for primary root length and 96.4% for total root length, compared to manual measurement. The correlation coefficient for each measurement was 0.999 with a standard error of prediction of 1.16 mm for primary root length and 0.97 mm for total root length. Conclusions: The developed machine vision system showed good performance for the morphological measurement of soybean roots. This image analysis algorithm, combined with a simple color camera, can be used as an alternative to the conventional seed vigor test method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.186-192
• /
• 2019

In general, many marine organisms are attached to the bottom of a ship in operation or a ship in construction. Due to this phenomenon, the roughness of the ship surface increases, resulting in loss of ship speed, resulting in economic losses and environmental pollution. This study acquires / utilizes camera images attached to ship's bottom and underwater drones to check the condition of bottom. The acquired image will determine the roughness according to marine life by the administrator's visual confirmation. Therefore, by applying a filter algorithm to correct the image to the original image can help in the correct determination of whether or not attached to marine life. Various correction filters are required for the underwater image correction algorithm, and the lighting suitable for the dark underwater environment has a great influence on the judgment. The results of the research test according to the calibration algorithm and the roughness of each algorithm are considered to be applicable to many fields.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.11-20
• /
• 2015

In this paper, we develop an intelligent mobile surveillance system based on binary CDMA for the unmanned automatic tracking and surveillance. That is, we implement a intelligent surveillance system using the binary CDMA wireless communication technology which is applied the merit of CDMA and TDMA on it complexly. This system is able to monitor the site of the accident on network in real time and process the various situations by implementing the security surveillance system. This system pursues an object by the 360-degree using camera, expands image using a PTZ(Pan/Tilt/Zoom) camera zooming function, identifies the mobile objects image within a screen and transfers the identified image to the remote site. Finally, we show the efficiency of the implemented system through the simulation of the controlled situations, such as tracking coverage on objects, object expansion, object detection number, monitoring the remote transferred image, number of frame per second by the image output signal etc..

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1480-1487
• /
• 2004

This study is proposed the novel gesture recognition method for the remote camera robot control. To recognize the dynamics gesture, the preprocessing step is the image segmentation. The conventional methods for the effectively object segmentation has need a lot of the cole. information about the object(hand) image. And these methods in the recognition step have need a lot of the features with the each object. To improve the problems of the conventional methods, this study proposed the novel method to recognize the dynamic hand gesture such as the MMS(Max-Min Search) method to segment the object image, MSM(Mean Space Mapping) method and COG(Conte. Of Gravity) method to extract the features of image, and the structure of recognition MLPNN(Multi Layer Perceptron Neural Network) to recognize the dynamic gestures. In the results of experiment, the recognition rate of the proposed method appeared more than 90[%], and this result is shown that is available by HCI(Human Computer Interface) device for .emote robot control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2636-2641
• /
• 2010

To support anti-collision between ship to ship and sea-search and sea-rescue work, ship automatic identification system(AIS) that can both send and receive messages between ship and VTS Traffic control have been adopted. And port control system can control traffic vessel service which is co-operated with AIS. For more efficient traffic vessel service, ship recognition and display system is required to cooperated with AIS. In this paper, we propose ship detection system which is co-operated with AIS by using background estimation based on image processing for on the sea or harbor image extracted from camera. We experiment with on the sea or harbor image extracted from real-time input image from camera. By computer simulation and real world test, the proposed system show more effective to ship monitoring.