• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.891-896
• /
• 2002

The structures and energies of p-tert-butylcalix[4]crown-6-ether(1) in various conformers and their alkyl ammonium complexes have been calculated by ab initio HF/6-31G quantum mechanics method. We have tried to obtain the relative affinity of partial-cone and 1,3-alternate conformers of 1 for alkyl ammonium guests by comparison with its cone-shaped analogue. We have also calculated the relative complexation efficiency of these host-guest complexes focusing on the binding sites of $crown-\sigma-enther$ moiety or benzene-rings pocket of the host molecule 1. These calculations revealed that the crown moiey has better complexation efficiency than upper rim part of calyx[4]arene that is in similar trend to the cone-shaped complexes.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1248-1254
• /
• 2001

The conformations and energies of p-tert-butylcalix[4]crown-6-ether (1) and its alkyl ammonium complexes have been calculated by ab initio HF/6-31G quantum mechanics method. The cone conformation was found to be most stable for free host 1. We hav e determined the binding site of these host-guest complexes focusing on the crown-6-ether or p-tert-butylcalix[4]arene pocket of the cone conformation of host molecule 1. The primary binding site of host 1 for the recognition of alkyl ammonium guests was confirmed to be the central part of the crown moiety of cone conformation. The complexation energy calculations revealed that the ammonium cation without alkyl group showed the highest complexation efficiency when combined with host 1, that is in satisfactory agreement with the experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2229-2237
• /
• 2012

The two chelates based on calix[4]arene and thiacalix[4]arene have been synthesized and used as neutral ionophores for preparing PVC based membrane sensor selective to $Ho^{3+}$ ion. The addition of potassium tetrakis(4-chlorophenyl)borate (KTpClPB) and various plasticizers, viz., NDPE, o-NPOE, DOP, TEP and DOS have been found to improve significantly the performance of the sensors. The best performance was obtained with the sensor no. 6 having membrane of $L_2$ with composition (w/w) ionophore (2%): KTpClPB (4%): PVC (37%): NDPE (57%). This sensor exhibits Nernatian response with slope $21.10{\pm}0.3mV/decade$ of activity in the concentration range $3.0{\times}10^{-8}-1.0{\times}10^{-2}M\;Ho^{3+}\;ion$, with a detection limit of $1.0{\times}10^{-8}M$. The proposed sensor performs satisfactorily over a wide pH range of 2.8-10, with a fast response time (5 s). The sensor was also found to work successfully in partially non-aqueous media up to 25% (v/v) content of methanol, ethanol and acetonitrile, and can be used for a period of 4 months without any significant drift in potential. The electrode was also used for the determination of $Ho^{3+}$ ions in synthetic mixtures of different ions and the determination of the arsenate ion in different water samples.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.793-799
• /
• 2011

We report the complexation behavior of calix[4]arenemonoquinone-triacid (CTAQ), which is an electroactive and water-soluble receptor for calcium ion. UV-visible and NMR spectroscopic studies revealed that CTAQ in aqueous media forms 1:2 as well as 1:1 (metal ion:CTAQ) stoichiometric complexes with $Ca^{2+}$, $Sr^{2+}$, and $Ba^{2+}$ ions. The nonlinear fitting of titration curves based on UV-visible absorption spectra showed that the binding constants of CTAQ for $Ca^{2+}$ ion are 4 $({\pm}2){\times}10^6\;M^{-1}$ for 1:1 and 1.4 $({\pm}0.5){\times}10^{11}\;M^{-2}$ for 1:2 complex. NMR conformational studies and the titration curves corroborate that the $Ca^{2+}$:CTAQ complex in aqueous solution is not present in the form of merely 1:1 one, being consistent with UV-visible spectrophotometric results. The Monte Carlo simulation supports the presence of a stable conformer of 1:2 complexes in which a $Ca^{2+}$ ion is interposed between two CTAQs at the global minimum. This is the first model of 1:2 stoichiometric complex of calix[4]arene and alkaline earth ions in aqueous media.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.3 no.2
• /
• pp.116-121
• /
• 2017

To overcome the low reactivity and solubility of alkali metal fluorides (MFs), various types of phase transfer catalysts (PTCs) have been developed over the last decades. However, since the fluoride activated by such PTC sometimes has a strong basicity, it may cause various side reactions such as elimination reaction or hydroxylation reaction in the nucleophilic fluorination reaction. Also, they may cause separation problems in the compound purification process. In recent advanced study, various PTCs have been developed to solve these problem of conventional catalyst. In this review, we would like to introduce three kinds of novel multifunctional organic catalysts such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), easy separable pyrene-tagged ionic liquid (PIL) by reduced graphene oxide (rGO), and tri-tert-butanolamine organic catalyst.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1374-1378
• /
• 2008

Using DFT B3LYP/6-31+G(d,p)//B3LYP/6-31G(d,p) calculation method, stable molecular structures were optimized for the p-tert-butylcalix[4]arene functionalized at lower rim by cage-annulated crown ether (1) in two different conformers and their potassium-ion complexes. Cone conformer of free host 1 was slightly more stable than partial-cone conformer. For two different kinds of complexation mode, the potassium ion in benzene-rings (bz) pocket showed comparable complexation efficiency with the cation in cage-annulated crown-ether (cr) for the cone and partial-cone conformers of 1. The complex (1${\bullet}K^+$) in the cr-binding mode for the partial-cone conformer was more stable than the cone conformer for B3LYP/6-31G(d,p) geometry optimization. However, $1_{(cone)}{\bullet}K^+$(cr) showed lower single-point energy than the $1_{(pc)}{\bullet}K^+$(cr) for B3LYP/6- 31+G(d,p) calculation method.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.7-13
• /
• 2006

infrared(IR) absorption spectra were calculated for the ethyl ester of p-tert-butylcalix[4]arene (1) in the cone conformer and its alkali-metal-ion complex. The vibrational spectra were obtained by restricted Hartree-Fock (RHF) calculations with the 6-31G basis set. The characteristic vibrational frequencies of various C-O and C=O stretching motions of the complexes show that the structure of 1+K+ complex is almost of C4v symmetry compared to 1+Na+ (C2v) analogue. The theoretical results for the host molecule 1 and complex (1+Na+) were compared with the experimental results, and the calculated vibrational frequencies agree well with the features of the experimental spectra.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3979-3990
• /
• 2011

Eight ionizable nano-baskets of cone 25,26-di(carboxymethoxy)calix[4]arene-crown-3,4,5,6 were synthesized and were verified by $^1H$ and $^{13}C$ NMR spectroscopy, IR spectroscopy and elemental analysis. The competitive solvent extractions of alkali and alkaline earth metal cations were studied using such nano-baskets. The novelty of this study is including three binding units of calixarene's bowl, crown ether's ring and electron-donor ionizable moieties in a unique scaffold to assess the binding tendency towards the cations. The objective of this work is to study the extraction efficiency, selectivity and $pH_{1/2}$ of such complexes. The result of solvent extraction experiments indicated that these compounds were effective extractants of alkali and alkaline earth metal cations. Their selectivities were greatly influenced by the acidity of solution and the conformations of the calixcrown. One conformer was selective to $Na^+$ in pH ${\geq}$ 4, while the other was highly selective to $Ba^{2+}$ in pH 6 and upper.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.40-44
• /
• 1998

The LAPS device of fast response and high sensitivity, based on electrochemical potential difference, and its system were fabricated for the precise measurement of pH changes and its characteristic were investigated. The electrostatic variation characteristics of LAPS according to the pH changes and parameters in the device were verified through a simulation using LAPS equivalent circuit model. The LAPS device and its system were fabricated on the basis of the result of simulation. The fabricated LAPS system showed linear sensitivity (about 56 mV/pH within the range of pH 2 to pH 11. In order to overcome the defect of general urea sensor (especially slow response time), urease immobilized nitrocellulose membrane was attached on the LAPS and resulted in the very fast response time, 0.29 mV/sec, 0.86 mV/sec at urea concentration of $50{\mu}g/ml,\; 500{\mu}g/ml$, respectively. And also in order to measure the uranyl ion, the uranyl ion selective sensing membrane with calix[6]arene derivative was used and its sensitivity was 25mV/concentration decade in the wide uranyl ion concentration range of $10^{-11}M\;to\;10^{-4}M$.