• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.44-47
• /
• 1997

Building a reliable mobile robot - one that can navigate without failures for long periods of time - requires that the uncertainty which results from control and sensing is bounded. This paper proposes a new mobile robot localization method using artificial landmarks. For a mobile robot localization, the proposed method uses a camera calibration(only extrinsic parameters). We use the FANUC arc mate to estimate the posture error, and the result shows that the position error is less than 1 cm and the orientation error less than 1 degrees.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.693-696
• /
• 1998

For camera calibration, this paper describes two steps to camera constants and camera parameters. The former is the radial distortion of lens, image center and focal length etc.. The latter is translation, rotation etc.. Camera calibration use tsai's algorithm. In this paper, the solutions are introduced into overdetermined system as matching points that are acquired from two CCD and measured object depth information.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.68-72
• /
• 1990

This paper describes a method of calculating the viewing parameters of a camera using a perspective view of a circular pattern. The proposed method determines the angle of pan, tilt, and swing, as well as the distance from the camera to the reference point of a world coordinate system, using simple equations. The proposed method is so simple and accurate that when used in a well-controled environment as in robot vision systems or visual inspection systems it may even seem trivial.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.304-308
• /
• 2000

Surface roughness measurement system with capacitance type gap sensor. Tentative result from the calibration measurement showed the potential applicability of the sensor to the processed specimen. In order to test the sensitivity of the measurement system, several parameters including valley depth, width of the specimen have been changed. Effect of the charge area between sensor and specimen surface has been also analyzed.

• 방송공학회논문지
• /
• 제5권2호
• /
• pp.260-272
• /
• 2000

본 논문에서는 왜곡율이 큰 광각 렌즈가 부착된 CCD 카메라를 위한 왜곡 영상의 간단한 자동 보정 방법을 제안한다. 제안된 방법으로 보정 목표물(Calibration Target)인 왜곡 그리드(Grid) 영상과 왜곡되지 않은 표준 그리드 영상에서 매칭되는 교차점들 사이의 관계를 3차 와핑(Warping) 식으로 모델링하고, 모델링한 식으로부터 보정 계수를 추출한다. 실험은 방사 왜곡이 심한 광각 CCD 컬러 카메라로부터 얻어진 투시가 강하게 들어있는 입력 영상을 가지고 수행하였다. 제안한 방법은 왜곡 영상의 보정율이 평균 영상오차와 최대 영상오차 영역에 대하여 모두 95 퍼센트 이상을 유지하므로 보정의 정확도가 기존 방법 보다 우수하며, 렌즈의 종류나 왜곡의 형태에 관계없이 포괄적으로 적용이 가능한 것으로 나타났다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.47-56
• /
• 2020

As a shift control of automatic transmission was managed with the electronic control unit (ECU), shift quality which is a measure of shift shock during gear change has markedly improved. However, the initial clutch pressure control of the clutch filling phase should continue to rely on the predetermined control input since the input and output speeds are unchanged until the shifting process attains the inertia phase. It is critical to minimize the clutch response time and control the clutch pressure accurately at the end of clutch fill to achieve quick shift response and smoothness. Advanced transmission companies have adopted an auto calibration method which establishes the databases for the clutch piston fill-up attributes and the frictional characteristics of the disks. In this study, a distinctive auto calibration algorithm for forklift transmission under development is proposed and verified with the real-vehicle test. The experimental calibration results showed consistent turbine dynamics at the initial stage of shifts with the properly calibrated clutch-fill control parameters. By using this technique, it is necessary to finalize the shift control for the various operation conditions.

• 한국측량학회지
• /
• 제30권1호
• /
• pp.31-38
• /
• 2012

UAV기반 멀티센서 시스템을 통해 취득된 영상의 지오레퍼런싱 정확도는 사용된 GPS/INS 시스템의 성능뿐만 아니라 카메라와 GPS/INS 시스템간의 상호관계를 나타내는 탑재변수의 정확도에 의해 영향을 받는다. 따라서 멀티센서 시스템 개발에 있어서 탑재변수의 정확한 추정은 필수적이다. 현재 우리는 재난/재해와 같은 긴급 상황에 대한 빠른 대응을 위해 실시간으로 대상지역을 감시할 수 있는 저고도 UAV기반의 실시간 공중자료획득 시스템을 개발하고 있다. 본 연구는 현재 개발 중인 시스템의 탑재변수 추정을 위한 시스템 캘리브레이션 방법론을 제안한다. 또한 실제 시스템의 제원을 이용한 시뮬레이션 데이터를 이용하여 정확하고 효율적인 캘리브레이션을 위한 효과적인 비행경로 및 지상기준점의 필요 개수를 도출하였다. 실험 결과, 총 6개의 스트립으로 구성된 비행경로를 따라 획득된 데이터와 5점 이상의 지상기준점 정보를 이용하면 제안된 방법론을 통해 정확한 탑재변수의 추정이 가능함을 확인할 수 있었다. 향후에는 제안된 방법론을 이용하여 개발된 시스템의 탑재변수를 추정하고 이를 이용하여 획득된 센서 데이터의 지오레퍼런싱 정확도 평가를 수행할 예정이다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.137-137
• /
• 2021

In this study we aimed to enhance streamflow prediction skill of a land-surface hydrological model, WRF-Hydro, over one of the snow dominated catchments lies in Himalayan mountainous range, Astore. To assess the response of the Himalayan river flows to climate change is complex due to multiple contributors: precipitation, snow, and glacier melt. WRF-Hydro model with default glacier module lacks generating streamflow in summer period but recently developed WRF-Hydro-CROCUS model overcomes this issue by melting snow/ice from the glaciers. We showed that by implementing WRF-Hydro-CROCUS model over Astore the results were significantly improved in comparison to WRF-Hydro with default glacier module. To constraint the model with the observed streamflow we chose 17 sensitive parameters of WRF-Hydro, which include groundwater parameters, surface runoff parameters, channel parameters, soil parameters, vegetation parameters and snowmelt parameters. We used Dynamically Dimensioned Search (DDS) method to calibrate the daily streamflow with the Nash-Sutcliffe efficiency (NSE) being greater than 0.7 both in calibration (2009-2010) and validation (2011-2013) period. Based on the number of iterations per parameter, we found that the parameters related to channel and runoff process are most sensitive to streamflow. The attempts to address the responses of the streamflows to climate change are still very weak and vague especially northwest Himalayan Part of Pakistan and this study is one of a few successful applications of process-based land-surface hydrologic model over this mountainous region of UIB that can be utilized to have an in-depth understanding of hydrological responses of climate change.

• 센서학회지
• /
• 제11권4호
• /
• pp.239-246
• /
• 2002

In this paper a new design of multi-layer perceptron(MLP) for camera calibration is proposed. Most existing techniques determine a transformation from 3D spatial points to their image points and camera parameters are tried to be estimated from the transformation. The technique proposed here, on the other hand, determines rays of sight uniquely from image points and parameters are estimated from the relationship using an MLP. By this approach projection and back-projection can be done more straightforwardly. Being based on a geometric model, a network design process becomes less ambiguous, which is a clear merit compared to other neural net based techniques. An MLP designed according to the technique proposed showed fast and stable learning in tests under various conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.260-265
• /
• 1994

Efforts have been devoted to developing rapid and accurate methods for measuring the errors of machine tools. The method os measurement and calibration of machine tool errors should be general and efficient. The objective of this study is to show in detail the full sequence from the measurement of errors factors to the verification of the positioning accuracy after compensation for the volumetric error. In this paper, we described the steps in measuring the volumetric error parameters, a general error model composed of error parameters, temperature, and the desired position. The validity of the error calibration methods proposed in this paper was tested using a vertical 3-axis CNC machine with a laser interferometer and a ball bar.