• 펄프종이기술
• /
• 제30권4호
• /
• pp.69-78
• /
• 1998

Papers loaded with 10-40% $TiO_2$ by dry weight were calendered under the various combinations of calendering conditions such as calender type, linear pressure, and roll temperature. After being calendered, light scattering coefficient, surface roughness, density, and tensile strength of the papers were measured and the results were summerized as follows: 1. To increase the light scattering coefficient of $TiO_2$-highly-loaded paper further by calendering, the calender roll pressure and temperature should be kept low. Under these conditions, the physical strength of the paper was not significantly affected. 2. At low roll temperature, soft nip calender and machine calender type showed the same relationship between paper density and its roughness. At high roll temperature, soft nip calender type gave much lower roughness than machine calender type at the same density. 3. At high roll temperature of both calenders, the density as well as the tensile strength of the TiO$_2$-loaded paper was increased significantly.

• 영어어문교육
• /
• 제13권1호
• /
• pp.133-158
• /
• 2007

The purpose of this study is to try to date the letters of Lady Susan and to find out which year's calender Jane Austen used to write the novel. The novel in forty-one letters with a brief narrated conclusion was transcribed as a fair copy by Jane Austen around 1805. However, no conclusive evidence for a precise date of composition exists, as only the fair copy survives. There is a watermark of 1805 on two leaves of the surviving manuscript of the transcribed copy. This indicates the period of the work's transcription but it does not indicate when it was first composed beyond suggesting that it was completed sometime before 1805. In the novel itself Jane Austen marked time sufficiently and frequently enough to allow us to follow it precisely. This strongly suggests that Jane Austen used a calender to write letters of the novel, even though dates and days were not given to the letters. To determine the most probable date of the calender is significant because it can be a clue to clarify when the novel was composed originally. Many words and phrases pointing to specific days or periods are mentioned in almost all the letters of the novel. From the words and phrases, a potential date to each letter can be successfully deduced and a potential possible calender for the novel can be made. In the end, all attempts to determine the authentic calender used for the novel fail. The main reason for the failure is that discovering clues to a specific authentic date to each letter proves internally impossible. Composition date of the novel still remains as a challenge requiring further study.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.49-57
• /
• 2001

This study was performed to identify the effect of calendering variables on the properties of coated paper such as sheet gloss, surface roughness, opacity, etc. The effect of calendering variables including the number of nips, pressure, machine speed and moisture content on the properties of coated paper was investigated. The calender was installed with two steel rolls and one cotton-made roll. With this calender, the coated sheets were passed through the calender from 1 to 4 times, applying the linear pressure on calender rolls, 5 through 100kg/cm and operating the machine speed 3 to 12m/min. Also, the moisture content of coated sheet was varied about 5 and 10%. It was found that sheet gloss and surface roughness of coated paper was increased with increasing the number of passing nips, linear roll pressure and the moisture content of coated paper. But it was shown that the opacity and brightness of coated paper were decreased under the above conditions due to the blackening. It was also suggested that the soft nip possibly increased the thermoplasticity of coating layer with the heat of steel roll, resulting in the reinforcement of surface properties positively. The sheet gloss and surface roughness of coated paper could be improved by the longer dwell time over the rolls.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.30-34
• /
• 2011

This study was carried out in order to evaluate the effect of coated weight and calender pressure on conductivity of printed RFID tags. The printed RFID tags have been manufactured with gravure printing and it has been well known that the efficiency of printed RFID tags is influenced by surface properties of substrate. In this study, coated paper was prepared with four different coated weight and three different calender pressure. After printing conductivity ink on coated paper, surface resistance was measured to evaluate the efficiency of the printed RFID tag. It was found that, with increasing of coated weight and calender pressure, the paper gloss, smoothness, brightness and gravure printability were improved while the surface resistance of the printed RFID tag was decreased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1157-1158
• /
• 2010

• 펄프종이기술
• /
• 제32권2호
• /
• pp.26-34
• /
• 2000

Understanding the nip geometry and heat transfer phenomena of soft nip calenders, which has been used in the production of newsprint and coated papers for many years, is very important since improper setting of soft nip calendering conditions causes deterioration of paper quality and productivity. In this study theoretical analysis on nip pressure and heat transfer phenomena in the nip of soft nip calenders has been made. The variables examined were calendering pressure, surface temperature of the heating roll, nip residence time and ingoing sheet moisture, By measuring nip widths and maximum nip pressure with Prescale film at a normal temperature, accurate line load has been obtained. With this line load, nip pressures at different temperature and nip widths were calculated. Results showed that as temperature increased, nip widths increased and nip pressures decreased. Equations derived for the heat conduction phenomena in soft nip calender nip were derived based on the semi-infinite plate and finite difference method and were used for the analysis of heat transfer within the nip. Temperature profiles in z-direction of paper within the nip were obtained. Finite difference method allowed more accurate analysis of the heat transfer in the calender nip. In this study newsprint and coated paper were considered as a single plate and two-layer plate consisted of sheet and coating layers, respectively. Heat trans-fer to paper increased as heated roll surface temperature and nip residence time were increased.

• 한국자기학회지
• /
• 제6권1호
• /
• pp.21-27
• /
• 1996

초미립 자성 입자를 이용한 MP(metal particle) 테이프의 특성을 개선하기 위하여, 제조 공정상의 여러가지 인자의 영향을 조사하였다. kneading 조건, milling 고형분, coating 두께, 배향조건, calender 조건, 경화 조건 등 주요 제조 조건에 따른 MP 테이프의 휘도(luminance) S/N, RF 재생 출력등의 전자 변환 특성과 광택, 점도, 강성 (stiffness)등의 물리특성이 조사하였으며, 이로부터 각 공정의 최적 제조 조건을 결정하였다. 이상의 제조 공정 조건으로 제조된 테이프는 High Band 8 mm 비디오 테이프에서 요구되는 전자변환특성, 툴리특성 및 내구성 등의 기본특성을 모두 만족하였다.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• 대한한의학원전학회지
• /
• 제20권1호
• /
• pp.113-123
• /
• 2007

The astronomical understanding of the heavens in "Hwangje-Naegyeong" can be divided into three main fields: the theory of cosmos, astronomy and calender. "Hwangie-Naegyeong" comprised the theory of cosmos, astronomy and calender established in the Han period. Astronomy was to describe the heavenly world and to interpret its phenomena. Calendar was to make numerical representations of the observations of all kinds of celestial bodies and to give them number-mystical meanings. Theory of cosmos treated what ancient Chinese speculated on the structure of the heavens including the earth. These three fields developed independently. However, they can also be be combined into one tradition, the astronomical knowledge. In the Han period that the astronomical knowledge grew from the mere accumulation of primitive knowledge to the established form. Throughout the Chinese history, the essential contents of astronomical knowledge including the theory of calendar, did not change much from what they were in Han period. "Hwangje-Naegyeong" use the lunisolar calendar(太陰太陽曆) and the Calendar in the late Han period(後漢四分曆). The use of the subdivisions of the seasons(24節氣) and the leap month(閏月) in "Hwangje-Naegyeong" means that it adopted the lunisolar calendar. Also "Hwangje-Naegyeong" adopted the Calendar in the late Han period by the four points: "Hwangje-Naegveong" ruled the circulation of the universe(周天度數) at 365, 1/4 terms, use the The Twenty Eight Constellations in astronomical observation, view the heavenly body by the ecliptic(黃道) and mark down year by the Heavenly Streams & Earthly Branches(干支紀年), The 24 solar terms is made by amount of Yang-Gi(陽氣) and samyum and samyang(三陰三陽) represent the amount of Yang-Gi in the earth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.890-893
• /
• 2001

Two-layer self bonding insulating tape consists of butyl rubber(IIR ; Isobutylene-isoprene rubber) adhesive layer and polyethylene protective film. Butyl rubber have inherent characteristics such as resistance to corrosion and water, low temperature flexibility, excellent electrical insulating properties also resistance to environmental effect such as ozone and ultraviolet. Polyethylene film was used for the purpose of good insulating properties and resistance to ozone and ultraviolet. The tape was manufactured using extrusion and calender method.