• Journal of Periodontal and Implant Science
• /
• 제34권3호
• /
• pp.581-591
• /
• 2004

Calcium carbonate(CC) is biocompatible and gradually absorb to be replaced by bone when implanted into bone tissue. Fibrin-fibronectin sealant system (FFSS) is a product of human-derived plasma. The effect is hemostasis, tissue fixation and adhesion, We expect synergic effects of this two materials in periodontal regeneration. When FFSS was grafted with bone graft in intrabony defects, could be eliminated exofolication of bone graft materials. This study evaluated above materials for periodontal regeneration of 6mm intrabony defects in 36 patients. lap surgery was carried in 14 defects of control group. experimental group 1 was 11 defects grafted with calcium carbonate, experimental group 2 was 11 defects which were grafted with calcium carbonate with FFSS. The clinical parameters evaluated included changes in attachment level, probing depth, gingival recession at 6 months. Postsurgery probing depth reduction was 3.1 ${\pm}$ 0.9mm in control, 3.8 ${\pm}$ 1.6mm in experimental group 1, 4.1 ${\pm}$ 1.1mm in experimental group 2. The result clinically and statistically improved compared to baseline(P<0.01), but the difference found among the groups were not statistically significant. Postsurgery clinical attachment level was 1.6 ${\pm}$ 1.2mm in control, 3.5 ${\pm}$ 2.0mm in experimental group 1, 3.3 ${\pm}$ 1.2mm in experimental group 2. All of the control and experimental groups resulted in a statistically significant reduction from baseline(P<0.01). The reduction of the experimental groups were statistically significant from control(P<0.05). But the change between experimental group 1 and experimental group 2 was not statistically significant. We conclude that mixture of CC and FFSS is effective to periodontal regeneration in intrabony defect.

• 한국수산과학회지
• /
• 제54권2호
• /
• pp.218-223
• /
• 2021

In this study, the possibility of use as a cartridge for 3D printing was confirmed by adding calcium to the alginic acid-added surimi mixture. The Alaska pollack Gadus chalcogrammus surimi added with alginic acid was immersed in a calcium solution (1 M calcium carbonate, 1 M calcium chloride, 1 M calcium sulfate, and 0.1 M calcium lactate) to evaluate the physical properties, color differences, and sensory properties of Alaska pollack surimi according to calcium types. As the results, in the case of surimi paste to which 1 M calcium carbonate was added, physical properties were weaker than that of 1 M calcium chloride, but gelation was appropriate and sensory properties was excellent. Addition of 1 M calcium chloride has the best physical properties, but it has a problem of bitter taste. With the addition of 1 M calcium sulfate, it has low solubility and poor physical properties as well as poor elasticity and bad taste. Addition of 0.1 M calcium lactate has weak physical properties but good sensory properties. From these results, 1 M calcium chloride has the best physical properties, but there is a decisive problem in sensory properties, so 1 M calcium carbonate is most suitable for commercial use.

• 펄프종이기술
• /
• 제46권2호
• /
• pp.1-7
• /
• 2014

Causticizing calcium carbonate (CCC) is produced as a by-product in the causticization step of the kraft pulping process. It is often calcined in a rotary lime kiln after being dewatered and reused in the causticizing process. But for the China mill, the conventional recycled way is difficult because the CCC is mainly obtained from non-wood pulping materials, which higher silicon content led to serious silicon obstacle. So it is often discarded as solid waste or used in landfill after dewatering and secondary pollution is brought. In order to prevent its secondary pollution, recent years, the CCC is used as a filler in China papermaking industry. In mill trials, the CCC can be used to replace an amount of precipitated calcium carbonate (PCC). Unfortunately, the application scope and dosage of CCC have been limited due to its lower sizing efficiency than PCC. In this study, the reason for the lower sizing efficiency of alkyl ketene dimer (AKD) when CCC was used as a filler was investigated. The results showed that the materials in green liquid, such as insoluble matter in green liquid, silicon and metal ions, were a little influence on the sizing efficiency of AKD. The higher BET and BJH pore volume of the CCC were the main reason for lower sizing efficiency of AKD when it was used as filler.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.315-326
• /
• 2009

PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.

• 한국의학물리학회지:의학물리
• /
• 제5권1호
• /
• pp.3-12
• /
• 1994

연구목적 : 두개내 석회화 병변이 있을때 자기공명영상에서 석회화의 인지는 어렵다고 알려져 있으나 실험적 모델을 통하여 자기공명영상에서 석회화의 신호강도 양상을 알아보고자 하였다. 대상 및 방법 : 탄산칼슘(Calcium carbonate)과 수산화인회석(Hydroxyapatite) 공을 이용하여 일정한 농도(10, 20, 30 40, 50%) 및 크기 (l-10mm)에 따라 Gel형태의 Phantom으로 만들어 전산화단층촬영 및 MRI의 TI및 T2 강조영상을 얻어 각각 나타나는 소견과 ROI값을 비교분석하고 실제 석회화를 동반한 두개내 병변이 있었던 2예를 비교 관찰하였다. 결과 : 탄산칼슘은 농도가 증가함에 따라 T1과 T2 강조영상에서 저신호강도가 뚜렷하였으며, T1 강조영상에서 수산화인회석의 경우는 10, 20, 30%에서 가장 고신호강도를 나타냈으며 40, 50%로 농도가 증가할 수록 저신호강도로 역전되었다. 가성부갑상선 기능저하증 1예도 기저핵에서 T1강조영상상 고신호강도를 보였다. 결론 : MRI에서 석회화의 신호강도는 석회화의 성분, 농도, 크기에 따라 차이가 있고 특히 고신호강도를 보이는 경우 다른 질환과 감별에 유의하여야 할 것이다.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.187-195
• /
• 2009

Much attention has been paid to the processing of inorganic whisker, especially calcium carbonate whisker, which can be used as reinforcement materials of polymer composite due to its low price. Unfortunately, the present synthesis technique of calcium carbonate whisker starts from calcinations of limestone, which involves high energy consumption and furthermore is a highly environment polluting reaction. In this report, needle-like aragonite was synthesized with a reversible solution reaction from limestone without calcination. Optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were used to characterize the morphology and crystal structure of intermediates as well as that of the product, aragonite. GCC (grinding calcium carbonate) powder was dissolved in an aqueous solution of magnesium sulfate with reflux and air flush. EDTA titration was used to evaluate reaction rate of the dissolution. A kinetics equation of the dissolution reaction was constructed, which displayed second-order kinetics with respect to the concentration of magnesium sulfate. A rate constant of $0.0015\;l^{-3}{\cdot}mol^{-1}{\cdot}h^{-1}$ was obtained. The dissolution reaction gave fiber-like magnesium hydroxide sulfate and gypsum crystal. Then needle-like aragonite with a length of $9.13\;{\pm}\;1.02\;{\mu}m$ and an aspect ratio of $5.64\;{\pm}\;1.37$ was synthesized from the dissolution product with $CO_2$ bubbling at $70^{\circ}C$.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권1호
• /
• pp.56-64
• /
• 2015

Acid mine drainage occurrence is a serious environmental problem by mining industry, it usually contains high levels of metal ions, such as iron, copper, zinc, aluminum, and manganese, as well as metalloids of which arsenic is generally of the greatest concern. An indigenous plant extract was used to produce calcium carbonate from Canavalia ensiformis as effective biomaterial, and its ability to form the calcium carbonate under stable conditions was compared to that of purified urease. X-ray diffraction and scanning electron microscopy were employed to elucidate the mechanism of calcium carbonate formation from the crude plant extracts. The results revealed that urease in the plant extracts catalyzed the hydrolysis of urea in liquid state cultures and decreased heavy metal amounts in the contaminated soil. The heavy metal amounts were decreased in the leachate from the treated mine soil; 31.7% of As, 65.8% of Mn, 50.6% of Zn, 51.6% of Pb, 45.1% of Cr, and 49.7% of Cu, respectively. The procedure described herein is a simple and beneficial method of calcium carbonate biomineralization without cultivation of microorganisms or further purification of crude extracts. This study suggests that crude plant extracts of Canavalia ensiformis have the potential to be used in place of purified forms of the enzyme during remediation of heavy metal contaminated soil.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1052-1056
• /
• 2008

소다 공정에서 탄산칼슘 결정의 평균입경과 형상 변화를 온도변화와 PAA 용액의 첨가에 대하여 연구하였다. 낮은온도($30^{\circ}C$, $60^{\circ}C$)에서는 Calcite 결정을, 높은 온도($80^{\circ}C$)에서는 Aragonite 결정을 얻었다. $30^{\circ}C$와 $80^{\circ}C$에서 용액에 PAA 용액을 첨가하여도 결정의 형상변화는 없었다. 중간온도($60^{\circ}C$)에서 PAA 용액을 첨가하여 Aragonite 결정을 얻었다. 결정의 형상변화가 PAA 분자 첨가로 인하여 일어났다. PAA 용액의 농도가 높을수록, 더 많은 Aragonite 결정을 얻었다. PAA 수용액의 농도가 높고 분자량이 클수록 탄산칼슘 결정의 평균입경은 증대하였으며, 형상변화가 일어나는 영역에서는 PAA의 분자량이 평균입경변화에 중요한 변수가 된다.

• 한국건축시공학회지
• /
• 제14권3호
• /
• pp.230-236
• /
• 2014

본 연구는 최근 제주도 지역내 현무암 가공과정에서 발생되는 폐기물인 석분슬러지를 재활용하기 위한 방안으로서, 인공경량골재의 제조가능성에 대해 실험하였다. 또한, 현무암 석분 슬러지로 제조된 인공경량골재의 물성을 개선하기 위해 폐유리분말과 탄산칼슘이 사용되었다. 현무암 석분 슬러지와 폐유리분말 그리고 소성방법의 복합적인 요인을 고려할 때 경량골재 내부의 발포성 향상을 위해서 탄산칼슘의 양은 9 wt.%가 적당하였다. 또한, 제조된 인공경량골재의 흡수율을 저하시키기 위해서는 폐유리 분말은 50 wt.%이내로 사용함과 동시에 직화소성의 방법을 적용하는 것이 더 효과적이다. 좀 더 낮은 비중과 흡수율을 가진 고품질의 인공경량골재를 성형하기 위해서는 성형된 경량골재의 표면에 폐유리분말을 도포한 후 그 시료를 직화소성법으로 소성하는 것이 더 효과적일 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.103-108
• /
• 2023

이 연구에서는 자발적 균열 치유 콘크리트에 적용할 수 있는 미생물자원을 확보하기 위한 기초 연구를 수행하였다. 이를 위해 본 실험에서는 생체광물 형성 미생물을 시료에서 분리하고 시멘트 내부 생존 및 탄산칼슘 석출량을 비교하여 적합한 미생물자원을 확보하였다. 시료에서 내생포자(endospore)를 형성하는 Bacillus 계열의 박테리아를 분리하여 16S rRNA 염기서열 분석법으로 동정한 6종의 미생물이 생성하는 탄산칼슘 석출량을 비교하였다. 탄산칼슘 석출량이 가장 많은 Bacillus velezensis와 Bacillus subtilis의 2종의 미생물을 선별하였고, 모르타르에 첨가 후 양생하여 위상차 현미경 관찰을 통해 미생물의 생존을 확인하였다. 또한 모르타르에 인위적 균열을 발생시켜 미생물에 의해 생성된 균열치유물질에 의한 자발적 균열 치유 작용을 확인할 수 있었다.