• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.121-128
• /
• 1980

In order to obtain the fundamental data for the preparation of ferroxplana $Zn_2Y(Ba_2Zn_2Fe_{12}O_{22})$, which is useful for GHz-band communication, the optimum coprecipitation condition of $Zn(NO_3)_2-6FeCl_3$ in $NH_4OH$ solution and the formation process of the hexagonal ferrite were investigated. By the hot-petroleum-drying and calcining the coprecipitated hydroxide mixture $Zn(OH)_2 +Ba(OH)_2+ 6Fe(OH)_3$, the fine and uniform powder was obtained , whose phase composition and microstructure were studied by X.R.D. and electron microscope. In results, it was found that $Zn_2Y$, BaM and $Zn_2W$ were the representative phases in calcined specimens whose activation energies of crystal growth were about 3, 8, 2.5, $5.4{\times}10^4$ J/mole , respectively. The sintered specimens would be appreciated as useful magnetic cores for the high frequency communication.

• Journal of Haehwa Medicine
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2001

In the result of investigating traditional chinese medical literatures to understand drug-processing about Pyritum, we could reach conclusions as follows: 1. Pyritum are divided into fresh Pyritum, calcining Pyritum, tempered Pyritum with vinegar by methods of drug-processing. 2. The methods of drug-procession about Pyritum like calcination, quenching, refining drugs with water or medicinal broth of Glycyrrhizae Radix(licorice), boiling with medicinal broth of Glycyrrhizae Radix(licorice) were used complicately. 3. Calcining Pyritum are grinded easily, convenient to apply a pill and powder and As, S are easily removed. Quenching Pyritum act on liver channel and then are reinforced the effects of relieving blood stasis, Pain and gushed out effecive ingredients. Refining Pyritum with water are reinforced the effect of tranquilizing the mind and clearing heat. above results indicates that using calcination, quenching and refining drugs with water together is the best method of drug-processing about Pyritum.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.62-68
• /
• 1986

$(Pb_{1-x} La_x)(Zr_{0.65} Ti_{0.35})_{1-x/4}O_3$ (PLZT X/65/35) powders were prepared by molten salt synthesis using NaCl-K Cl and conventional calcining of oxides. The effects of molten salt on formation and charactrization of PLZT powder and on dielectric piezolectric and optical properties of PLZT ceramics were studied, The completed PLZT powder formation in the presence of fused salt was attained at 50-10$0^{\circ}C$ lower temperature than that in solid state reaction and the particle size of the powder made by molten salt synthesis was markedly increased with increasing calcining temperature. The substitution of Na and/or K ions in NaCl-KCl for Pb ion in process of molten salt synthesis was increased with increasing La concentration Z. These substituted Na and/or K ions were identified as the origins of decreasing coupl-ing factor and optical transmittance of PLZT ceramics.

• Cement
• /
• s.48
• /
• pp.20-28
• /
• 1972

본 논문은 Frankenberger씨의 논문을 번역한 것이다. preheater의 열적 성능 평가를 위해선 calcining degree, thermal efficiency 및 calorific efficiency를 이용하고 있으며 1kg의 dust circulation으로 30kcal/kg$\cdot$cli의 연료 소모량을 증가시키고 있어 4단 이상으로 증가시키는 문제도 대두 연구하고 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.485-492
• /
• 2000

The sintering characteristics and the effects of density on dielectric properties in 0.2Ba(Mg$_{1}$3(Nb$_{2}$3/)O$_3$-0.8Ba(Mg$_{1}$3//Ta$_{2}$3/)O$_3$ceramics were investigated. The samples were made by the powder mixing techniques with the two step calcining conditions. When the 1st and the 2nd calcining temperatures were 120$0^{\circ}C$ and the sintering temperature was 155$0^{\circ}C$the density of samples showed the highest value (7.45 g/cm$^3$, 98.5% of theoretical density) among them. The dielectric constant of samples was nearly independent of density but the tan $\delta$ and the temperature coefficient of dielectric constant decreased linearly with increasing of the density. The quality factor(Q$\times$f), the temperature coefficient of resonance frequency and the dielectric constant of Ba[Mg$_{1}$3(Nb$_{0.2}$/Ta$_{0.8}$)sub 2/3/]O$_3$ceramic were 79,548 GHz, +1.5 ppm/$^{\circ}C$ and 26 in the microwave range, respectively.ely.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.620-624
• /
• 2003

LiCo$_{y}$Mn$_{2-y}$O$_4$ samples were synthesized by calcining a mixture of LiOH.$H_2O$, MnO$_2$ (CMD) and CoCO$_3$ calcining at 40$0^{\circ}C$ for 10 h and then calcining twice at 75$0^{\circ}C$ for 24 h in air with intermediate grinding. All the synthesized samples exhibited XRD patterns for the cubic spinel phase with a space group Fd(equation omitted)m. The electrochemical cells were charged and discharged for 30 cycles at a current density 600 $mutextrm{A}$/$\textrm{cm}^2$ between 3.5 and 4.3 V. As the value of y increases, the size of particles becomes more homogeneous. The first discharge capacity decreases as the value of y increases, its value for y=0.00 being 92.8 mAh/g. The LiMn$_2$O$_4$ exhibits much better cycling performance than that reported earlier. The cycling performance increases as the value of y increases. The efficiency of discharge capacity is 98.9％ for y=0.30. The larger lattice parameter for the smaller value of y is related to the larger discharge capacity. The more quantity of the intercalated and the deintercalated Li in the sample with the larger discharge capacity brings about the larger capacity fading rate.ate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.483-487
• /
• 2001

As a part of basic investigation for utilizing of cuttle bone as a calcium source, we examined on the extraction methods (calcining at $800^{\circ}C$ for 2 hrs, autoclaving at $121^{\circ}C$ for 10 hrs and ultrasonic treatments at $60^{\circ}C$ for 10 hrs) as a pretreatment methods for preparation of calcium-based powder from cuttle bone, The color of calcined calcium-based powder from cuttle bone was white, while that treated by other methods was light yellow. The calcium content in calcined calcium-based powder was $70.5\%$, and revealed high about 2 times compared to those pretreated by other methods. And, calcium solubility in calcined calcium-based powder was improved 22 times compared to raw cuttle bone powder, Among calcining, autoclaving and ultrasonic treatments as a pretreaoent methods for preparation of calcium-based powder from cuttle bone, calcining treatment was superior to other methods on the aspect of color, calcium solubility and purity of calcium-based powder, Judging from X-ray diffraction pattern of calcined calcium-based powder, most of calcium was present as a form of calcium oxide, But, pH of calcined calcium-based powder revealed strong alkali of pH 12.9. This pH value might invoke health risk in using food resource. Therefore, for utilization effectively calcined calcium-based powder from cuttle bone, it requires a suitable treatment such as adjustment of pH to neutral condition.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.168-172
• /
• 1988

In order to prevent the PbO vaporization during calcination and to produce the powder of good sinterability, a coprecipitation method for preparing homogeneous Lead-Zirconate-Titanate (PZT) powder from aqueous salt solution is described. In this method, the PZT-ceramics show low calcining and sintering temperature, and they have good sintering and electronic properties.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.79.2-79
• /
• 2003

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.41-45
• /
• 2004

A dust injection system was developed for the lime calcining rotary kiln for the coke dust from the coke dry quenching(CDQ) facility to be used as a fuel. The CDQ dust was injected with the gaseous fuel through the hole in the burner. In order to prevent the spot heating large particles should be removed from dust and dust should be injected as fast as possible so that particle combustion lasts as long as possible without precipitation. This is especially necessary when dust is burned together with gaseous fuel because the gaseous fuel can not go so far and in addition dust combustion aggravates hot spot heating. In this research a rotation drum screen was used to remove particles with diameter larger than 4mm and dust injection speed was 40m/sec. And the burner was adjusted not to use swirl that hinders flame go far away. With these measures scale generation iside the kiln could be reduced to be negligible and in addition NOx emission could be reduced from 150ppm to 20ppm. The fuel reduction was about 85Mcal/T-lime.