• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.217-221
• /
• 2008

In this study, We have been investigated the effect of calcination temperature and high-energy ball-milling of powder influences the $BaTiO_3$-based PTCR(Positive Temperature coefficient Resistance) characteristics and microstructure. The mixed powder was obtained from $BaCO_3$, $TiO_2$, $CeO_2$ ball-milled in attrition mill. The mixed powder was calcine from 1000 $^{\circ}C$ to 1200 $^{\circ}C$ in air and then it was sintered in reduction- re-oxidation atmosphere. As a result, The room-temperature electrical resistivity decreased and increased with increasing calcination temperature. specially, Attrition milled powder could have low room-temperature resistivity and high PTC jump order at 1100 $^{\circ}C$. attrition milling had lower room-temperature resistivity than ball milling. Particle size decreased by Attrition milling of powder influences in calcination temperature and room-temperature resistivity.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.487-493
• /
• 2010

There has been a controversy on the formation mechanism of $TiO_2$ nanotubes. This study was conducted to elucidate the formation mechanism of $TiO_2$ nanotubes. $TiO_2$ nanotubes were prepared by a hydrothermal method. $TiO_2$ nanotubes formation mechanism was investigated by controlling the formation time. It was found that $TiO_2$ nanotubes were formed by growing, not by wrapping of sheets. The phase structure of hydrogen titanate nanotubes was different from that of $TiO_2$ nanotubes. It is important to wash the sodium titanate nanotubes with an acidic solution to get hydrogen titanate nanotubes and then to calcine the hydrogen titanate nanotubes around $400^{\circ}C$ to obtain $TiO_2$ nanotubes.

• 한국자기학회지
• /
• 제9권4호
• /
• pp.217-222
• /
• 1999

공업적으로 세라믹공정에 많이 사용되고 있는 습식 볼밀링으로 NiCuZn ferrite 제조과정 중 혼입되는 불순물의 양을 조사 검토하였다. NiO, CuO, ZnO 및 Fe2O3의 화학조성을 변화시켜 25 vol%로 혼합하고 스테인레스 볼밀로 습식방법을 이용하여 18시간 분쇄한 후 건조시켜 $700^{\circ}C$ 3시간 하소하였다. 하소한 분말을 다시 상기와 같은 방법으로 65시간 스테인레스 볼밀로 최종 분쇄하여 저온소결용 NiCuZn ferrite(NCZF) 소재를 제조하였다. NCZF 연자성 소재를 만드는 동안 혼합 분쇄과정에서 혼입되는 불순물의 스테인레스 스틸의 양은 산화철 및 산화니켈의 함량에 많은 영향을 받았고, 하소 후의 분쇄과정에서 혼입되는 불순물의 양은 결정화된 정도에 따라 영향을 받았다. 전자기적 특성을 갖는 화학조성의 조절을 위하여, 출발원료의 함량에 따라 분쇄과정에서 혼입되는 스테인레스 스틸의 함량을 도출하는 형식을 유도하였다.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.387-394
• /
• 2008

The Physical property changes of calcined clay by carburization were investigated studied. The carburization mechanism is the penetration of carbon which occurred during incomplete fuel combustion into crevice of clay structure. The experiments for elasticity and freeze-thaw resistance were conducted, and the results can be summarized as follows: Dynamic modulus of elasticity and also freeze-thaw resistance of calcined clay by carburization treatment increased more than 92% after testing 300 cycle, which was more improved than 88% of calcined clay. Therefore, it can decrease the possibility of winter-sowing, which is one the weakness of calcined clay. It is on the basis of the fact that the porosity of calcined clay by carburization treatment is about 12%, which indicates smaller pore spaces comparing with the 14% of porosity of calcined clay and those values were calculated by apparent porosity show and also supported by SEM images. Infrared emissivity of calcined clay by carburization treatment and calcined clay were respectively 0.92 and 0.9l at $80^{\circ}C$. However, those values were 0.91 and 0.88 at $200^{\circ}C$, which means infrared emissivity of calcined clay by carburization treatment shows 3.6% higher than the calcined clay. Moreover, within the wavelength range from 3 to $7\;{\mu}m$, while the calcined clay had low infrared emissivity, the calcined clay by carburization treatment had increased infrared emissivity. It is inferred that it was affected by carbon element that has high infrared absorptivity within this wavelength range.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.352.1-352.1
• /
• 2014

Indium Tin Oxide (ITO) films are the most extensively studied and commonly used as ones of TCO films. The ITO films having a high electric conductivity and high transparency are easily fabricated on glass substrate at a substrate temperature over $250^{\circ}C$. However, glass substrates are somewhat heavy and brittle, whereas plastic substrates are lightweight, unbreakable, and so on. For these reasons, it has been recently suggested to use plastic substrates for flexible display application instead of glass. Many reaearchers have tried to produce high quality thin films at rood temperatures by using several methods. Therefore, amorphous ITO films excluding thermal process exhibit a decrease in electrical conductivity and optical transparency with time and a very poor chemical stability. However the amorphous Indium Gallium Zinc Oxide (IGZO) offers several advantages. For typical instance, unlike either crystalline or amorphous ITO, same and higher than a-IGZO resistivity is found when no reactive oxygen is added to the sputter chamber, this greatly simplifies the deposition. We reported on the characteristics of a-IGZO thin films were fabricated by RF-magnetron sputtering method on the PEN substrate at room temperature using 3inch sputtering targets different rate of Zn. The homogeneous and stable targets were prepared by calcine and sintering process. Furthermore, two types of IGZO TFT design, a- IGZO source/drain material in TFT and the other a- ITO source/drain material, have been fabricated for comparison with each other. The experimental results reveal that the a- IGZO source/drain electrode in IGZO TFT is shown to be superior TFT performances, compared with a- ITO source/drain electrode in IGZO TFT.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.187-191
• /
• 2005

A ZnGa$_2$O$_4$ phosphor target was synthesized through solid-state reactions at a calcine temperature of 700 $^{\circ}C$ and sintering temperature of 1300 $^{\circ}C$ in order to deposit ZnGa$_2$O$_4$ phosphor thin film at various temperature using rf magnetron sputtering system. A ZnGa$_2$O$_4$ phosphor thin film was deposited on Si(100) substrate and annealed by a rapid thermal processor(RTP) at 700 $^{\circ}C$, for 15 sec. The x-ray diffraction patterns of ZnGa$_2$O$_4$ phosphor target and thin film showed the main peak (311) direction. ZnGa$_2$O$_4$ thin film has better crystalization due to as function of increasing substrate and annealing temperature. The cathodoluminescence(CL) spectrums of ZnGa$_2$O$_4$ phosphor thin film showed the main peak 420 nm wavelength and the maximum intensity at the substrate temperature of 500 $^{\circ}C$ and annealing temperature of 700 $^{\circ}C$, for 15 sec.

• 공업화학
• /
• 제21권1호
• /
• pp.18-23
• /
• 2010

$TiO_2$를 담체로 한 Pt계 촉매를 이용하여 저온($80{\sim}150^{\circ}C$) 영역에서 적용될 수 있는 $H_2$ SCR의 촉매 반응 특성을 조사하였다. 실험은 반응가스 중 수분, 산소, 촉매의 소성온도, $H_2$/NOx 몰비, 공간속도에 대하여 수행하였다. Pt/$TiO_2$를 이용한 $H_2$ SCR 반응에서 수분은 inhibition으로 작용하였으며, 배가스 중 산소 농도가 희박할수록 반응활성이 증가하는 경향을 나타내었다. 하지만 산소가 존재하지 않을 때에는 NOx와 $H_2$가 반응하여 $NH_3$ slip이 발생하였다. 또한 촉매의 상전이 문제에 의하여 $600^{\circ}C$ 이하에서 소성하는 것이 가장 유리하였으며, $H_2$/NOx 몰비가 증가할수록 반응 활성이 증가하였다. 하지만 $H_2$ slip은 몰비가 증가하여도 $H_2$가 $H_2O$로 산화되어 나타나지 않았다.

• 대한세포병리학회지
• /
• 제6권2호
• /
• pp.106-115
• /
• 1995

Reactive humsn mesothelial cells were examined by immunocytochemical stain with intermediate filaments (cytokeratin [CK1, CK7, CK8, CK18, CD19), vimentin, desmin, actin), epithelial membrane antigen, carcinoembryonic antigen (CEA), MHC class II antigen (HLA-DR), LeuM-1 (CD15), $\alpha1-antitrypsin$(ACT), $\alpha1-antichymotrypsin$ (ACHT), CD68(KP-1) and FcyRIII(CD16). The mesothelial cells were isolated from patients with liver cirrhosis and pleural effusion, and short-term cultured in RPMI 1640 media containing 10% heat inactivated fetal calf serum and 1% identical supernatant fluid of the patients' transudates. The results obtained are as follows 1. The cultured-reactive mesothelial cells were positive for the protein of cytoskeleton such as cytokeratin and vimentin, but negative for desmin and actin. The resting mesothelial cells showed positive reactions for cylokeratin, but negative for vimentin, desmin and actin. 2. The primary antibodies to the cytokeratin were strongly reactive for CK1, CK8 and CK18 but negative for CK7 and CK19 in both reactive and resting mesothelial cells. 3. Resting mesothelial cells showed negative reactions for CEA, but strong positive reactions in cultured-reactive mesothelial cells. 4. The markers for the monocytes/histiocytes(CD11b, CD14, CD16, CD68, Iysozyme and $\alpha1-antitrypsin$ and $\alpha1-antichymotrypsin$) were nonreactive in resting mesothelial cells, but lysozyme and $\alpha1-antitrypsin$ were weakly reactive in reactive and proliferative mesothelial cells. 5. MHC Class II molecule(HLA-DR antigen) was negative in both resting and reactive mesothelial cells. These results suggest that the short-term cultured, reactive mesothelial cells show a newly aberrant expression of the vimentin and calcine-embryonic antigen. The reason of the aberrant expression of the intermediate filament and oncofetal antigen in reactive and proliferative mesothelial cells should be further evaluated.

• 한국재료학회지
• /
• 제11권3호
• /
• pp.178-184
• /
• 2001

rf-마그네트론 스퍼터링 방법을 이용하여 높은 광투과성을 지니며 c-축 배향된 KLN 박막을 제작하였다. 하소 및 소결 과정을 거쳐서 균일하고 안정한 상태의 KLN 타겟을 제조하였다. KLN 타겟은 화학량론적인 조성 및 K가 30%, 60%, 그리고 Li가 각각 15%, 30% 과량된 조성을 사용하였으며 K와 Li의 휘발을 방지하기 위하여 낮은 온도에서 소결시켰다. 제조된 타겟을 사용하여 rf-magnetron sputtering 방법으로 박막을 제조하였으며, 이때 K가 60% Li가 30% 과량된 타겟으로 제조할 때 단일상의 KLN 박막을 얻을 수 있었다. KLN 박막은 코닝 1737 기판 위에서 우수한 결정성과 높은 c-축 배향성을 나타내었으며, 이때 박막의 성장조건은 고주파 전력 100 W, 공정 압력 150 mTorr, 기판 온도 58$0^{\circ}C$였다. 가시광 영역에서 박막의 투과율은 약 90% 이고, 흡수는 333 nm에서 발생하였으며 632.8 nm에서 박막의 굴절율은 1.93이었다.

• 한국결정성장학회지
• /
• 제31권5호
• /
• pp.197-202
• /
• 2021

Z형 육방정 페라이트인 Ba₃Co₂Fe₂₄O₄₁(Ba₃Z)와 Ba_1.5La_1.5Co₂Fe₂₄O₄₁(Ba_1.5La_1.5Z) 분말을 1차 하소 후 용융염 합성법을 통해 합성하였다. Ba₃Z의 경우, 1000℃에서 하소한 결과 M형 육방정 페라이트와 Y형 육방정 페라이트가 합성되었으며, 이후 1150℃와 1200℃에서 소결했을 때 Z형 육방정 페라이트를 얻을 수 있었다. 하지만 Ba_1.5La_1.5Z의 경우 1000℃에서 하소하였을 때 M형 육방정 페라이트와 CoFe₂O₄(Spinel 상) 그리고 LaFeO₃으로 합성되었으며, Z형 육방정 페라이트는 용융염 합성 과정에서 합성되지 않았다. 또한 입자 형상의 종횡비는 용융염 합성 시 소결온도가 증가함에 따라 감소하는 경향을 보였다. 따라서 높은 종횡비를 갖는 단상의 Ba_1.5La_1.5Z를 합성하기 위해서는 용융염 합성 전 1차 하소 온도가 Spinel 상이 형성되는 온도보다 낮아야 될 것으로 판단된다.