• Journal of Magnetics
• /
• 제2권1호
• /
• pp.16-21
• /
• 1997

Those were investigated, the crystallographic, morphological, and magnetic properties of barium ferrite film (SiO2/Si substrate) prepared by sol-gel dip coating. Appropriate sol was prepared by dissolvin barium and iron nitrate in ethylene glycol at 80$^{\circ}C$. To obtain the films, thermally oxidized p-type silicon substrate with (111) of crystallographic orientation were dipped into the sol, dried at 250$^{\circ}C$ to remove organic material, and heated at 800$^{\circ}C$ for 3 hours in air for the crystallization of barium ferrite. It was found that the particles of barium ferrite formed on the substrate exhibited needle-like shape placing parallel to the substrate and its c-axis is long axis direction. There was tendency that the coercive force in horizontal direction to the substrate was higher than that in vertical direction to it. This tendency was profound in large thickness.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.34-42
• /
• 2001

The influences of substrate temperature were studied when fabricating KLN thin film on amorphous substrate using an rf-magnetron sputtering method. Investigating the vaporization temperature of the each element, the excess ratio of target and the optimum deposition conditions were effectively selected when thin filmizing a material which have elements with large difference fo vaporization temperature. In order to compensate K and Li which have lower vaporization temperatures than Nb, KLN target of composition excess with K of 60% and Li of 30% was used. KLN thin film fabricated on Corning 1737 glass substrate had single KLN phase above 58$0^{\circ}C$ of substrate temperature and crystallized to c-axis direction. The optimum conditions were rf power of 100W, process pressure of 150mTorr, and substrate temperature of $600^{\circ}C$.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.89-92
• /
• 2005

The AIN/AI thin films were prepared at various conditions, such as $N_2$ gas flow rate [$N_2(N_2+Ar)$] from 0.6 to 0.9, a substrate temperature ranging from room temperature to $300^{\circ}C$ and working pressure 1mTorr. We estimated crystallographic characteristics and c-axis preferred orientations of AIN/AI thin films as function of AI electrode surface roughness. The optimal processing conditions for AI electrode were found at substrate temperature of $300^{\circ}C$ sputtering power of 100W and a working pressure of 2mTorr. In these conditions, we obtained the c-axis preferred orientation of $AIN/AI/SiO_2/Si$ thin film about 4 degree.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1169-1174
• /
• 2009

In this paper, a prototype of implementable Sun tracking algorithm for mobile systems powered by alternative energy is proposed. The proposed system uses 2-axis tilt sensor and 3-axis magnetic sensor to measure orientation and posture of the system according to the horizon coordinates system, which are used to compensate tilt effects. Then through astronomical calculation using the present time and position informations obtained from GPS sensors, the calculated azimuth and altitude of the Sun in that location. The position of the Sun is converted to that of the mobile Sun tracking system coordinates and used to control A-axis and C-axis of the system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.999-1002
• /
• 2002

Cylindrical Cam Mechanism is widely used in the fields of industries, such as machine tool exchangers, textile machinery. This paper proposes a method for manufacturing of cylindrical cam in Multi CNC machining center. Multi CNC machining center has two different types depending on the tilting axis. For the manufacturing procedures. in this paper the location and the orientation of cutter path are defined from shape design data of cam. The integral NC code fur the both types of multi-axis CNC machining center can be created using the coordinates mapping between design coordinates and work coordinates. Finally, CAD/CAM program is developed on $C^{＋＋}$ language. This program can display manufacturing and kinematics simulation, which can make integral NC code for multi-axis CNC machining center of two types.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.38-43
• /
• 2009

In this paper. a prototype of a mobile Sun tracking system is proposed. The proposed system uses 2-axis tilt sensor and 3-axis magnetic sensor to measure the orientation and the posture of the system according to the horizontal system of coordinates, which are used to compensate the slope effects. Then through astronomical calculation using the time and position information obtained by GPS sensor the azimuth and altitude of the Sun from that location is calculated. The position of the Sun is converted to that of the mobile Sun tracking system coordinates and used to control A-axis and C-axis of the system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.151-154
• /
• 2003

AlN/Al/SiO$_2$/Si thin films for application to FBAR(Film Bulk Acoustic Resonator) devices were prepared by FTS(Facing Targets sputtering system) apparatus which provides a stable discharge at low gas pressures and can deposit high quality thin films because of the substrate located apart from the plasma. The AlN thin films were deposited on a $SiO_2(1{\mu}m)/Si(100)$ substrate using an Al bottom electrode. The process parameters were fixed such as sputering power of 200W, working pressures of 1mTorr and AlN thin film thickness of 800nm, respectively and crytallographic characteristics of AlN thin films were investigated as a function of $N_2$ gas flow rate$[N_2/(N_2+Ar)]$. Thickness of AlN thin films were measured by $\alpha$-step, the crystallographic characteristics and c-axis preferred orientation were evaluated by XRD.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.216-220
• /
• 2001

Piezoelectric ZnO thin films by Facing Targets Sputtering(FTS) method were deposited on slide glass. The Facing Targets Sputtering system can deposit thin film at plasma-free condition and change the deposition condition in wide range. The characteristics of ZnO thin films changed with power, working pressure and substrate temperature were investigated by XRD(x-ray diffractometer), alpha-step(Tencor) and SEM(Scanning Electron Microscopy) analyses. In the results, we suggest that FTS system is very suitable for the preparation of high quality ZnO thin films with good c-axis orientation.

• 한국표면공학회지
• /
• 제31권4호
• /
• pp.217-222
• /
• 1998

The Facing Targets Sputtering(FTS) system has several advantages for preparing films over a wide range of working gas pressure on plasma-free substrates. Co-Cr thin films seem to be one of the most promising media for perpendicular magnetic recording system. In this study, the capabillities of the system fordepositing C0-Cr films have been investigated. Under various Ar gas pressure, films with morphologically dense microstructure and good c-axis orientation were deposited, even when the incident angle $\psi_x$ of sputtered part icles to the film plane was below abount $50^{\circ}C$. this may imply that the shadowing effect by obique incidence of particle can be compensated by rapid surface diffusion owing to the high kinetic energy of particles arriving at the growing film. It has been confirmed that the FTS system is very useful for perparing Co-Cr thin films recorging media.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.511-516
• /
• 2002

$Y(NO_3)_3{\cdot}5H_2O$ 과 $Mn(CH_3CO_2)_2{\cdot}4H_2O$를 출발물질로 하여 졸-겔(sol-gel)법으로 Si(100) 기판위에 육방정계의 $YMnO_3$ 박막을 제조하였다. $YMnO_3$ 박막의 열처리 온도변화, 가수분해시 가수의 양(Rw)과 촉매제의 첨가에 따른 결정 구조 및 전기적 특성을 조사하였다. $YMnO_3$ 박막의 결정화는 700${\circ}C$부터 시작되었고 완전한 결정화는 800${\circ}C$-1시간 열처리하여 이루어 졌으며, $YMnO_3$ 박막의 가수의 양 Rw=6일때 육방정계 $YMnO_3$상의 c-축 (0001) 우선 배향성을 나타내었고, Rw=1 과 Rw=12인 경우에는 Rw=6인 경우보다 c-축 배향성은 감소하였다. 산성이나 염기성 촉매제 첨가에 따라 $YMnO_3$ 박막의 결정성 및 우선 배향성은 영향을 받아 c-축 우선 배향성은 감소하고 사방정계의 $YMnO_3$ 상을 형성하였다. Rw=6일 때 $YMnO_3$박막은 0.2V인가 전압에서 $1.2{\times}10-8 A/cm^2$으로 우수한 누설 전류 밀도를 나타내었고 누설 전류 밀도는 인가 전압에 따라 크게 변하지 않았다.