• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.7-16
• /
• 2004

The purpose of this study was to find the characteristics of travel behavior and accessibility in terms of spatial structure. We analyzed travel behaviors and accessibility using a mode choice model and the Complementary Accessibility Index(CAI). The urban spatial structures that were compared were a compact city (CC) versus a sprawled city (SC), and high residential density districts (HD) versus low residential density districts (LD). First, CC and HDs residents had a shorter commuting distance than the CC and LDs residents. Second, behavior models showed that the use of Private cars for commuting in SCs was found to be greater than private car use in CCs, and that public transportation modes would be encouraged in CCs. Third, changes associated with the time and cost of commuting by private car generally affect the demand for public transportation modes in the CC. Also, analysis of cross elasticity suggests that changes of subway travel time affect the demand for buses very elastically. Fourth, the CAI of SC and LD were superior to the CC and HD even though the SC inefficient urban forms in terms of spatial structure. So, the spatial distribution of population density was also found to be an important factor affecting accessibility and energy savings.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.348-359
• /
• 2017

Recently, various public transportation activation policies are being implemented in order to mitigate traffic congestion in metropolitan areas. Especially in the metropolitan area, the bus information system has been introduced to provide information on the current location of the bus and the estimated arrival time. However, it is difficult to predict the travel time due to repetitive traffic congestion in buses passing through complex urban areas due to repetitive traffic congestion and bus bunching. The previous bus travel time study has difficulties in providing information on route travel time of bus users and information on long-term travel time due to short-term travel time prediction based on the data-driven method. In this study, the path based long-term bus travel time prediction methodology is studied. For this purpose, the training data is composed of 2015 bus travel information and the 2016 data are composed of verification data. We analyze bus travel information and factors affecting bus travel time were classified into departure time, day of week, and weather factors. These factors were used into clusters with similar patterns using self organizing map. Based on the derived clusters, the reference table for bus travel time by day and departure time for sunny and rainy days were constructed. The accuracy of bus travel time derived from this study was verified using the verification data. It is expected that the prediction algorithm of this paper could overcome the limitation of the existing intuitive and empirical approach, and it is possible to improve bus user satisfaction and to establish flexible public transportation policy by improving prediction accuracy.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.413-420
• /
• 2006

Most vendors of digital signal processors (DSPs) support a Harvard architecture, which has two or more memory buses, one for program and one or more for data and allow the processor to access multiple words of data from memory in a single instruction cycle. We already addressed how to efficiently assign data to multi-memory banks in our previous work. This paper reports on our recent attempt to optimize run-time memory. The run-time environment for dual data memory banks (DBMBs) requires two run-time stacks to control activation records located in two memory banks corresponding to calling procedures. However, activation records of two memory banks for a procedure are able to have different size. As a consequence, dual run-time stacks can be unbalanced whenever a procedure is called. This unbalance between two memory banks causes that usage of one memory bank can exceed the extent of on-chip memory area although there is free area in the other memory bank. We attempt balancing dual run-time slacks to enhance efficiently utilization of on-chip memory in this paper. The experimental results have revealed that although our algorithm is relatively quite simple, it still can utilize run-time memories efficiently; thus enabling our compiler to run extremely fast, yet minimizing the usage of un-time memory in the target code.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.915-926
• /
• 2017

The subway is the transportation means most commonly used by the citizens of the metropolitan area along with the buses in the metropolitan area and major metropolitan municipalities. However, satisfaction with the signboards is low and the signboards need to be improved. In this study, we investigated the problem of guide signs of city hall and exchange area with L - shaped history structure for guide signs affecting route finding. As a result, it is necessary to confirm whether the moving distance is long and moving accurately to the desired destination due to the L - shaped historical structure in both the station and the alternate area. In both stations, the number of the guide signs, Problems such as installation position, height, other. In this study, the movement within the subway station is classified according to the space. The type of guide sign installation was defined, and the specific principles for guiding the movement route were proposed. This research is expected to be useful as an important basic data for the types and layout of subway stations.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.554-561
• /
• 2006

In recent years, as SoC design research is actively conducted, a large number of IPs are included in a system. Various bus protocols and bus architectures are designed to increase IP reusability. Among them, the AMBA AHB became a de facto standard although it is somewhat inadequate for a large scale SoC. We proposed SNP and SNA, high performance on-chip-bus protocol and architecture, respectively, to solve the problem of the conventional shared buses. However, it seems to be imperative that the new on-chip-bus system support AMBA-compatible IPs for a while since there are a lot of IPs with AMBA interface. In this paper, we propose an extended SNP specification and a corresponding SNA component to support ABMA-compatible IPs used in SNA - based system. We extend the phase of the SNP by 1 bit to add new 8 phases to support communication based on AMBA protocol without penalty of elongated cycle latency. The ARB-to -XSNP converter translates the protocol between AHB and SNP to attach AMBA -compatible IPs to SNA based system. We show that AMBA IPs can communicate through SNP without any degradation of performance using the extended SNP and AHB - to- XSNP converter.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2020

South Korea entered an aged society phase in 2017 with the elderly accounting for 14% or higher of the entire population. It is expected to enter a super-aged society phase in 2026. The mobility handicapped, including the disabled and the elderly, are expected to grow continuously, and the demand for transport service for the mobility handicapped will definitely increase further. Thus, there is thus a need for various research to increase the utilization rate of low-floor buses among the mobility handicapped. This study analyzed the locations of getting on and off transportation means, time of departure and arrival, purpose of use, and frequency of use by the day among the mobility handicapped by making use of the information about their use of special transport service run by the mobility support center for the mobility handicapped. The study then proposed a method of selecting locations for low-floor bus stops to reflect the distribution and need of getting on and off transportation means among the mobility handicapped with such spatial analysis techniques as geocoding, overlapping analysis, buffer analysis, and generate tessellations. Finally, the study selected 228 locations for low-floor bus stops in Cheonan and reported a need to add 35 low-floor bus stops after eliminating the ones where the locations overlapped the old ones.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.76-86
• /
• 2012

The purpose of this study is to investigate the environmental equity of the accessibility to public transportation services in the city of Daegu. The 2005 census data as well as bus stop and subway station datasets were integrated for building the GIS database. Public transportation service areas were then identified by a coverage method. Mann Whitney U test was used for statistically comparing the socioeconomic characteristics over different levels of access to the public transportation services. Both Dong-gu, Suseong-gu, Dalseo-gu, and Buk-gu located outside of the city had worse accessibility than others while Jung-gu, Seo-gu, and Nam-gu had better accessibility than others. There appeared no environmental inequity pattern in terms of the percentages of men, women, and teenagers over the city of Daegu whereas there existed some environmental inequity pattern in terms of the percentages of people above the age of 65 and people below poverty line. This environmental inequity pattern would be caused by some factors. Firstly, the lower income class has tended to reside in the declined or blighted areas far away from public transportation facilities since this class can not afford to pay expensive rents and land prices around the main roads with higher accessibility. Many old people belonging to the lower income class also reside in the declined or blighted areas. Secondly, there has been no law to locate bus stops and subway stations considering residents' socioeconomic characteristics and the spatial distribution of public transportation facilities has been not managed systematically by the city government. This research would shed insight on building the public transportation policy to locate bus stops and subway stations and to select the routes of buses and subways considering the spatial distribution of residents' socioeconomic characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1851-1861
• /
• 2014

This study aims to calculate reliable sectional travel speeds with the consideration of the characteristics of the probe data collected in the interrupted traffic flow. First, in order to analysis the characteristics of the probe data, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle collected by DSRC. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. However, The comparison results show that the sectional travel speeds from the DSRC probe vehicles are not significantly different. Finally, based on the distribution characteristics of the sectional travel speeds of each probe vehicle and the representative values counted during a collection period, we drew the optimal outlier removal procedure and evaluated the estimation errors. The evaluation results showed that the DSRC sectional travel speeds were found to be similar to the observed values from actually running vehicles. On the contrary, in the case of the sectional travel speeds of intra-city bus, it was analyzed that they were less accurate than the DSRC sectional travel speeds. In the future, it will be necessary to improve BIS process and make use of the travel information on intra-city buses collected in real time to find various ways of applying it as traffic information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2017

This study propose a method to predict the bus arrival time by considering the signal delay time which is an element which can not be considered in the current bus arrival prediction information generation algorithm. In order to consider the signal delay time, travel time is divided into three components: service time, cruising travel time, and signal delay time. Signal delay time was estimated using intersection arrival time and TOD. The results show that most of the errors that occurred in predicting the arrival time are within about 30 seconds. Some of the estimates have large errors due to the nature of this methodology that uses the estimated value of the intersection arrival time rather than the observation value. It is also difficult to predict the arrival time of the express buses using this method. Future studies such as improving this through real-time location information will greatly improve the accuracy of the methodology.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.72-82
• /
• 2008

Benzene is a very harmful and toxic compound known as human carcinogen by all routes of exposure. Owing to the risky feature of benzene, several countries such as Japan, UK and EU have established the ambient air quality standard and protect from that risk of it. Korea also has designated it as one of the criteria air pollutants and established the concentration limit ($5\;{\mu}g/m^3$) in the air and is going to apply the standard from 2010. Benzene is emitted from various sources such as combustion plants, production processes, waste treatment facilities and also automobiles. Mobile source is known as one of the major emission sources of benzene. In this study, we estimated the domestic emissions of benzene from mobile source and compared the results with those of advanced countries. Mobile source was divided into 2 categories, Le., on-road source and non-road source. The total emissions of benzene from mobile source were estimated as 3,106 tons/yr and 1,612 tons/yr was emitted from on-road source and 1,494 tons/yr was from non-road source. Emission ratio of benzene from on-road source showed that 80.0% was from passenger cars, 10.1% was from taxis, 7.2% was from light-duty vehicles, 2.5% was from heavy-duty vehicles and 0.2% was from buses. In the case of non-road source, the distribution showed that 66.3% was from construction machineries, 14.5% was from locomotives, 11.7% was from ships, 7.1% was from agriculture equipments and 0.5% was from aircrafts. The cold-start emissions were estimated as 942 tons/yr and this value was almost 1.5 times greater than that for hot engine emissions (608 tons/yr). In addition, the fuel-based distribution was 65.9%, 31.1% and 2.8% from gasoline, LPG and diesel vehicles, respectively. The emission ratio from mobile source occupied 65% and 30% of total benzene emissions in USA and UK, respectively. In case of Korea, the emission ratio of benzene from mobile source occupied 29% (15% from on-road source, 14% from non-road source) which showed similar value with UK.