• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 2002

Localization with array sensors has been applied for not only military but also non-military purposes. The identification of submarines and fish finding are those examples. Nowadays the demand for noise identification is increasing to characterize noise sources and improve acoustic performance of underwater acoustic equipment. For that reason KRISO/KORDI recently constructed an anechoic basin which bus reflection only at the free surface. This paper suggests a noise identification methods using MUSIC algorithm in such an acoustic field. For comparison phase delay sum and minimum valiance methods are also described. At first basic principles are described. A several numerical simulations are also performed. The results say that reflection effect many cause a new non-real source although good estimation is obtained under no reflection conditions.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1240-1247
• /
• 2014

The applications of Distributed Generation (DG) in a smart distribution grid environment are widely employed especially for power balancing and supporting demand responses. Using these applications can have both positive and negative impacts on the distribution system. The sizing and location of their installations are the issues that should be taken into consideration to gain the maximum benefit from them when considering the economic aspects. This paper presents an application of the Bat Algorithm (BA) for the optimal sizing and siting of DG in a smart distribution power system in order to maximize the Benefit to Cost Ratio (BCR), subjected to system constraints including real and reactive power generation, line and transformer loading, voltage profile, energy losses, fault level as well as DG operating limits. To demonstrate the effectiveness of the proposed methodology and the impact of considering economic issues on DG placement, a simplify 9-bus radial distribution system of the Provincial Electricity Authority of Thailand (PEA) is selected for the computer simulation to explore the benefit of the optimal DG placement and the performance of the proposed approach.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.8-20
• /
• 2013

This paper deals with the concept design of HVDC system for controlling AC network reactive power. HVDC system can control active power and reactive power and the control concept of reactive power is similar to SVC(Static Var Compensator). Reactive power is controlled by adjusting firing angle of HVDC system under the condition that AC filters are switched. Reactive power depends on AC voltage condition, considering the steady-state and transient state to maintain the stable operation of AC network in the viewpoint of voltage stability. Therefore, in the design stage of HVDC, the reactive power required in the AC network must be considered. For the calculation of operation angle in HVDC system, the expected reactive power demand and supply status is examined at each AC system bus. The required reactive power affects the determination of the operation angle of HVDC. That is, the range of "control deadband" of operation angle should have the capability supplying the required reactive power. Finally, the reactive power control concepts is applied to 1GW BTB Pyeongtaek-Dangjin HVDC system.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.356-361
• /
• 2008

The conventional drive system of SRM has a current sensor per each phase. The torque demand signal generated by the outer control loop is translated into individual current reference signal for each phase. The torque is controlled by regulating these currents. Using the SRM in a variable-speed control, the phase currents are generally regulated to achieve a square wave. The simplest form of current regulation uses fixed frequency delta modulation of the phase voltages. The aim of this paper is to regulate 3-phases current of SRM by only single current sensor using delta modulation with digital chip. In this paper, the asymmetric bridge converter which is able to control independently phases and be excited simultaneously is used as the driver system for 6/4 poles SRM. And the current sensor is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. The proposed delta modulation technique has been implemented in a simple digital logic circuit using EPLD(Electrically Programmable Logic Device). This method is verified through simulation and experiment results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1674-1688
• /
• 2019

As environmental pollution and fossil fuel energy problems from fuel vehicle have occurred, the interest of electric vehicle(EV) has increased. EV industry and energy industry have grown dynamically in these days. It is expected that the next generation of primary transportation will be EV, and it is necessary to prepare EV infra and efficient energy management such as EV communication protocol, EV charge station, and smart grid. Those EV and energy industry fields are now on growth. Also, the study and development of them are now in progress. In this paper, distributed charge signal processing software for smart slow and quick EV charge is proposed and designed for dealing with EV charge demand. The software consists of smart slow and quick EV charge schedule engine and EV charge power distribution core. The software is designed to support two charge station types. One is normal EV charge station and the other is bus garage EV charge station. Both two types collect the data from EV charge stations, and then analyze the collected data. The software suggests optimized EV charge schedule and deliveries EV charge power distribution information to power switchboard system, and the designed software is implemented on embedded system. It is expected that the software provides efficient EV charge schedule.

• 융합정보논문지
• /
• 제9권1호
• /
• pp.68-73
• /
• 2019

본 연구는 스마트분전반 MG(;Micro-Grid) 구성의 중심축으로 모듈형 하이브리드 발전원과 DC버스를 통하여 링크를 갖으며 표준소켓을 사용하여 불법연결을 감지 차단하는 기능을 부여하고, 전력계통의 안정화를 달성함을 목적으로 한다. 전력변환장치, 스마트분전반, 통합제어시스템의 개발과 효율적인 수요관리가 필요하며, MG 전체시스템과의 호환성이 절실하다. 이는 공통 전력 연결 규약으로 안전하고 누구나 연결을 쉽게 할 수 있는 하이브리드발전시스템으로 데이터 관리가 용이해지고 다양한 제조사의 시스템 확대설치에 대한 대비가 가능하다.

• Elastomers and Composites
• /
• 제56권1호
• /
• pp.20-31
• /
• 2021

There is an increasing demand for the rolling resistance reduction in truck bus radial (TBR) tires in the tire industry. In TBR tires, natural rubber is used as a base polymer to prevent wear and satisfy required physical properties (cut and chip). A binary filler system (silica and carbon black) is used to balance the durability of the tire and rolling resistance performance. In this study, natural rubber (NR) compounds applied with a binary filler system were manufactured at different cure temperatures for vulcanizate structure analysis. The vulcanizate structures were categorized into carbon black bound rubber, silica silane rubber network, and chemical crosslink density by sulfur. Regardless of the cure temperature, the cross-link density per unit content of carbon black had a greater effect on the properties than silica due to affinity with NR. The relationship analysis between the mechanical, viscoelastic properties with vulcanizate structure could be a guideline for manufacturing practical TBR compounds.

• Elastomers and Composites
• /
• 제59권1호
• /
• pp.8-16
• /
• 2024

As regulations on greenhouse gas emission have strengthened globally, the demand for improved fuel efficiency in automobiles continues to rise. In response, the tire industry is actively conducting research to improve fuel efficiency by enhancing tire performance. In this study, silica-filled epoxidized natural rubber (ENR)/butadiene rubber (BR) blend compounds were manufactured according to ENR types and silica contents, and their physical properties and vulcanizate structure were evaluated. ENR-50, which has a higher epoxide content than ENR-25, exhibited stronger filler-rubber interaction, resulting in superior abrasion resistance. In addition, because of its high glass transition temperature (T_g), the wet grip performance of ENR-50 improved, even though the rolling resistance increased. Increasing the amount of silica had little effect on the abrasion resistance due to the increase in filler-rubber interaction and decrease in toughness. In addition, ENR-50 exhibited better wet grip performance; however, the rolling resistance increased. The results indicated that truck bus radial (TBR) tire tread compounds can be designed by applying ENR-50 to improve wear resistance and wet grip performance. In addition, by applying ENR-25 and reducing the silica contents improve fuel efficiency.

• Spatial Information Research
• /
• 제4권2호
• /
• pp.131-146
• /
• 1996

본 논문은 GIS기법을 활용하여 서비스업의 새로운 형태인 프랜차이즈 방식의 패스트푸드점의 입지를 분석한 것이다. 패스트푸드 체인점을 이용하는 고객들의 행태조사와 서울시의 패스트푸드점의 분포를 통해 패스트푸드점의 입지요인을 계량적 기법을 적용하여 일차적으로 추출하였다. 수요적 측면에서 패스트푸드점의 입지에 영향을 주리라 예상되는 인구유인 시설물과 통행인구가 많은 결절지점, 그리고 고밀도 대단위 아파트 단지로 부터의 버퍼죤을 생성한 후 입지가능지구를 추출하였다. 한편 공급적인 측면에서 용도지구, 지가, 접근성 그리고 가시성 요인들을 고려하여 이미 추출된 입지가능지구로 부터 최종적인 후보입지지구를 선정하였다. 이렇게 패스트푸드점이 입지할 수 있는 가설적인 후보지구와 실제 패스트푸드점의 분포와를 비교하였다. 결론에서 본 연구의 제한점과 GIS 기법을 활용하여 입지를 분석에서 시급히 이루어져야 할 자료구축의 필요성을 논하였다.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.273-286
• /
• 2013

근래 지하철과 버스의 운영상 문제점이 대두되면서 신교통수단 도입이 요구되고 있다. 특히 여러 지자체들이 도입하고 있는 AGT방식의 경전철은 고가건설에 따른 도시미관 저해, 민원발생 등으로 건설이 지연되는 사례가 많아, 그에 대한 해결책으로 친환경적이고 접근이 편리한 노면전차가 대두되고 있다. 본 연구는 창원시를 친환경적인 대중교통지향형 도시로 탈바꿈 할 수 있도록 노면전차의 개요, 특징, 장 단점 등을 분석하고 이러한 시스템의 도입을 위해 기존의 대중교통수단간의 환승체계를 구축하기 위한 목적이다. 창원시 노면전차는 1단계 2018년, 2단계 2021년 개통을 목표로 추진 중에 있으며, 총 길이 33.9km 정거장 38개소를 건설할 계획이다. 2011년 예비타당성 조사에서는 B/C는 0.88로 경제성은 다소 떨어지나, 정책적 분석측면에서 AHP값이 0.502로 타당성이 있는 것으로 평가되었다. 다만 노면전차 도입 전에 선행되어야 할 과제로 첫 번째 노면전차의 도입시 버스를 포함한 대중교통 체계의 개편뿐만 아니라 자동차의 수요관리와 함께 이루어져야 하며, 국내 현실에 맞는 세심한 시스템 선정이 요구된다. 두 번째 철저한 시민공감대 형성 및 선진 시민의식이 제고되어야 하며, 노면전차의 도입에 필요한 법적인 제도가 확립되어져야 한다.