• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.43-48
• /
• 2012

In As the proliferation of wireless LAN and smart devices like smart phone, the importance of the wireless Internet local broadcasting service is increasing. In order to provide broadcasting data for the multiple devices, one-way roadcasting technology which could not support re-transmission, should be used and the receiving frame error is major problem. Furthermore unlicense devices cause interference to the receiver, burst frame error tends to be happened. In this paper, new method to overcome the burst and random frame error is proposed and the effect is analyzed.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.32.2-32.2
• /
• 2010

The Korean Solar Radio Burst Locator (KSRBL) is a single dish radio spectrograph, which is designed to record the spectra of microwave (0.5 - 18 GHz) bursts with 1 MHz spectral resolution and 1 s time cadence, and locate their positions on the solar disk within 2 arcmin. It was installed at KASI in 2009 August, and operational thereafter. The antenna pointing coefficients were initially determined during the installation and refined later using a series of antenna pointing calibrations. The filter to prevent the radio frequency interference around 2 GHz was designed and is to be installed. After the installation, the full frequency coverage will be recovered from the temporarily restricted frequency coverage (5 - 14 GHz). Also an effort to solve a couple of minor problems for the full performance of the system is in progress.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.63-65
• /
• 2016

DVB (Digital Video Broadcasting)-S2 (Satellite - Second Generation) 표준은 현재 위성방송 시스템으로 가장 많이 사용되고 있는 표준이나, 추가적인 성능향상과 보다 다양한 응용분야에 적용하기 위해 DVB-S2 기술을 확장한 DVB-S2x (Satellite - Second Generation Extension) 시스템이 제정되었다. 그 중에서도 612,540 심볼 길이의 수퍼프레임 (Super-frame) 구조를 선택적으로 도입하여 긴 데이터 길이에 대해 스크렘블링 (Scrambling)을 적용하는 방법과 PLS (Physical Layer Signaling) 코드와 같은 참조 데이터 필드를 반복적으로 사용하는 방법 등을 사용할 수 있도록 하였다. 이를 통해 동일채널 간섭 (co-channel interference)에 대한 강인성을 증가시키고, 매우 낮은 SNR (Signal to Noise Ratio) 환경에서의 수신기 성능 향상 효과를 제공하게 된다 본 논문에서는 버스트 슈퍼프레임 전송 기반의 DVB-S2x 수신기를 위한 동기부를 설계하고 구조를 제안한다. 슈퍼프레임의 포맷은 DVB-S2x Annex E 의 규격 중 2 번 포맷을 이용하였으며, 2 번 슈퍼프레임 포맷은 버스트 (burst) 기반의 전송 방식에 용이한 측면이 있다. 동기부는 크게 버스트 검출부, 주파수 복구부, 신호 이득 조절부 그리고 심벌 타이밍 복구부로 구성된다.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.181-187
• /
• 2002

Connection admission control(CAC), which decides whether or not to accept a new call request, is one of the most Important preventive congestion control techniques in asynchronous transfer mode(ATM) networks. To develop a practical CAC scheme, first we propose a "Modified Cell Loss Probability MP${\nu}"$, which is based on "Virtual Cell Loss Probability P${\nu}"$, taking into account mean burst duration of input traffic source and buffer size in ATM networks. MP${\nu}"$ computes more accurate cell loss probability than P${\nu}"$ without increasing computational complexity, since P${\nu}"$ is formulated simply form the maximum and the average cell rate of input traffic. P${\nu}"$ is overestimated as compared to the real cell loss probability when the mean burst duration is relatively small to the buffer capacity. Then, we Propose a CAC scheme, based on "Modified Virtual Bandwidth(MVB)" method, which may individualize the cell loss probabilities in heterogeneous traffic environments. For the proposed approach, we define the interference intensity to identify interferences between heterogeneous traffic sources and use it as well as MP${\nu}"$ to compute MVB. Our approach is well suitable for ATM networks since it provides high bandwidth utilization and guarantees simple and real time CAC computation for heterogeneous traffic environments.heterogeneous traffic environments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.3-7
• /
• 2017

Holographic data storage system (HDSS) features short access times, high storage capacities, and fast transfer rates, since the data is recorded and read not by lines but by pages within a volume of holographic material. Burst error caused by physical impact on the high density storage system becomes very longer than that of conventional storage systems. This paper proposes an LDPC product code using two LDPC code to resolve burst error. When a total code rate is similar, the performance of two LDPC code having high code rate is better than that of one LDPC code having low code rate. Also, with error factors of two-dimensional intersysbol interference and misalignment, the proposed scheme can improve the performance in holographic data storage system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.222-226
• /
• 2021

To comply with CE marking requirements, the electromagnetic compatibility (EMC) and low-voltage directive (LVD) tests are conducted on the sub-racks of International Thermonuclear Experimental Reactor (ITER) AC/DC converters and bypass switches. The EMC tests consist of a series of tests, including the electromagnetic interference test, the electromagnetic field immunity test, and the rapid transient burst immunity test. In the LVD test, the electric shock protection test, the xcessive temperature limit and heat resistance of equipment tests, and the fire spread prevention test are performed. This work presents and reviews the European Directive for EMC/LVD and introduces the methods of EMC and LVD tests for the sub-racks of AC/DC converters and bypass switches. It also evaluates the test method and results to meet the European Directive requirements for CE marking. The sub-racks of ITER AC/DC converters and bypass switches successfully pass the EMC and LVD tests.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.412-421
• /
• 2008

We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.383-390
• /
• 2000

In this paper, an adaptive power control algorithm in the DS/CDMA system is proposed. The currently used transmitter/receiver based on IS-95 and the radio propagation channel under mobile communication environments are modeled. Theses are the key features for the simulation to analyse the performance of power control. the distribution of the received SIR(signal to interference ratio)and the bit error probability are the required parameters for the performance analysis. Furthermore the influence of the power control command error on the above parameters are analyzed. By using the performance analysis of IS-95 and the occurrence of burst errors that is characteristic for wireless channels. the new power control algorithm is proposed. The proposed power control algorithm increases the SIR which results in a better service quality and an enhancement in the system capacity.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.54-59
• /
• 2010

This paper suggests a new data link protocol with an adaptive frame length control scheme for wireless data networks which is subject to errors that occur with time variance. We analyze the proposed scheme under a two-state markov block interference(BI) model. Numerical results show that the proposed scheme can achieve high throughput performance for both dense and diffuse burst noise channels.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2983-2985
• /
• 2005

There are many factors to degrade the performance of power-line communication systems such as multi-path fading, attenuation, colored and impulsive noise, and interference. Most of all, impulsive noise is generated by switching operation of many power supply units and equipments, and it causes both burst error and random error as the pattern of generation. In this paper, the variations of performance for RS convolutional concatenated coded system are simulated and analysed with the several parameters over impulsive noise channel.