• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.73-79
• /
• 2003

The characteristics of NOx emission in multi fuel/air staged combustor have been experimentally studied. The design concept of multi fuel/air staged combustor is creation of two separate flame, a primary flame is act as a pilot flame for the secondary combustion stage combustion zone, where most of fuel burns. Experiments were performed on a semi-industrial scale (thermal input 0.233 ㎿) in a laboratory furnace and Liquefied Petroleum Gas(LPG) was used as primary and secondary fuels. The study included parametric study to identify the optimum operating conditions which are primary/secondary fuel ratio, primary/secondary air ratio, primary swirl intensity and secondary swirl intensity for reducing NOx emission. The test demonstrated that NOx emission can be reduced by >70% in accordance with operating conditions.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.2102-2102
• /
• 2001

Near infrared, diffuse reflectance spectroscopy has shown significant potential for in vitro and in vivo assessment of metabolic status. However, the complexity of living samples can lead to ambiguous results. This presentation will focus on methods that provide controls for scattering and absorption estimation in tissue. For robust estimations, normalization procedures will be shown which can greatly improve interpretability of results. Normalization based on time, location and spectral property will be shown with data from models, tissue phantoms and in vivo measurements. In particular, interpretation of NIR spectra associated with major respiratory constituents will be examined. Measurement of constituents such as hemoglobin, myoglobin, tissue edema, and lactate will be shown. Results suggest that NIR may provide a valuable tool for physiological monitoring in critical care research and practice.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.261-270
• /
• 1999

Sintering transforms powdered ore into lumped ore so that the latter can be used in a blast furnace. The powdered or combined with coke and other materials is loaded into a container and moved along by a pallet while the ignited coke burns. The speed by which the pallet moves determines how much sintering takes place. Since the process is complicated and lacks an accurate mathematical model, human operators manually control the speed by monitoring various factors in the plant. In this paper, we propose a neural network-based pallet speed controller which copies human operator knowledge. Actual process data were collected from a sintering plant for eight months and preprocessed to remove noisy and inconsistent data. A multilayer perceptron was trained using a back-propagation learning algorithm. In on-line testing at the sinter plant, the proposed model reliably controlled pallet speed during normal operation without the help of human operators. Moreover, the quality and productivity was as good as with human operators.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.186.1-186.1
• /
• 2011

Most of waste plastics including waste vinyls have been recycled up to about 50% of waste production, 4.5 million ton per year in 2009. To fundamentally increase the recycled amounts of waste plastics to waste production, the energy utilization of waste plastics is inevitable. But the contents of PVC included in waste plastics can limit the use as a RPF and make the air pollutants such as HCl and dioxin when it burns in the combustion system. Accordingly the source dechlorination by using heating method can be applied to make low contents of HCl as less than 0.6%. In this study the twin screw reactor using heat medium was used for the source dechlorination. As results of study, it was considered that this system is effective for the industrilal application.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.45-49
• /
• 2013

High frequency system has been used for the purpose of skin care and obesity treatment, by high-frequency energy is applied to the human body generates deep heat. Conventional high frequency system could not selection control by depending on the body load fluctuations. Such as burns and side effects have been reported by system instability and then therapeutic effect is insufficient. During treatment, objective information about the status of the patient was no. Because of treatment methods are subjective, and so tailored treatments were impossible. In this paper, high frequency medical system with sinusoidal frequency characteristics without distortion of the Push pull switching scheme for pain relief therapy was designed. And control circuit that was designed by feedback using the output changes according to the body-load fluctuation. Last, power circuit for efficient control the heat generated from the hardware was proposed.

• 대한약침학회지
• /
• 제12권3호
• /
• pp.89-95
• /
• 2009

We report the case of a 65-year-old female with burn injury from scalds. She was observed with a burn injury of the right arm and leg that occurred 6 days before. She was treated with pharmacoacupuncture Soyeom, and herb medicine daily for 3 weeks. After Twenty days, burn wound size was reduced and tissue regeneration was accelerated. In conclusion, it is our belief that pharmacoacupuncture and herb medicine is effective to treat burn injury, and future studies will be required to ascertain this method on burn injury.

• 한국자기공명학회논문지
• /
• 제21권4호
• /
• pp.145-151
• /
• 2017

Rhodiola rosea, also known as gold root or rose root, is a perennial plant in the family of Crassulaceae. The rhizhome of R. rosea has been widely used as a hemostatic, tonic for burns and contusions in traditional Chinese medicine. Recent studies reported its strong antioxidant and adaptogenic properties. In this paper, we attempted to isolate compounds from the methanolic extract of R. rosea rhizomes. Four compounds including one new compound (1), two kaempferol glycosides (3 and 4) were isolated from chloroform and ethyl acetate soluble fraction of R. rosea extract. The structures of 1~4 including relative stereochemistry were determined by MS and NMR analysis.

• Journal of Korean Neurosurgical Society
• /
• 제59권3호
• /
• pp.319-321
• /
• 2016

People with epilepsy are believed to be at a higher risk of incurring accidental injury than people who do not have seizures. The incidence of injury, either due to seizure or accident as a consequent of seizure is also high and varies from 0.03% to 3%. The most common injuries are head contusions, lacerations, burns and fractures. In this article, we present a case of quadriplegia after a generalized epileptic seizure.

• 가정과삶의질연구
• /
• 제31권1호
• /
• pp.61-72
• /
• 2013

This study evaluated Kinetic Family Drawing according to preschoolers' external problem behavior. To achieve this, 120 preschoolers who were four or five years old were investigated and data were statistically analyzed using mean, and chi square analysis with the SPSS Win 13.0 program. The preschoolers' family drawings were analyzed by using the method in Kinetic Family Drawing(Burns & Kaufman, 1972). First, regarding characteristics, the preschoolers in the aggression group rotated certain person or drew the figure from behind, the preschoolers in the delinquency group drew long arms, the figure from behind, and angular forms. Second, regarding action depicted, the preschoolers in both aggression and delinquency groups perceived the lower activity level of their fathers, dangerous situations, and excluded family interaction. Third, regarding symbols, the preschoolers in the delinquency group drew objects such as balls. Finally, regarding drawing style, the preschoolers in the delinquency group drew edges and underline.

• 항공우주기술
• /
• 제8권1호
• /
• pp.108-116
• /
• 2009

본 논문에서는 한국형발사체를 사용한 달 탐사 위성의 궤적 설계를 수행하였다. 발사체는 달탐사위성과 킥모터 스테이지를 지구 저궤도에 투입하고, 이후 킥모터 스테이지의 연소에 의해 직접전이궤도 또는 고타원궤도에 투입된다. 설계된 궤적에 대해 TLI 및 LOI 기동을 실제와 가깝게 finite burn으로 모델링하여 요구속도 및 필요한 추진제량을 계산하여, 한국형 발사체를 사용할 경우 발사 임무에 대한 가능성을 제시하였다.