• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.275-285
• /
• 2003

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes. which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude: one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame. an elongated flame. and an in-burning flame. Particular attention is focused on an elongation flame. which is associated with a turnabout phenomenon of vortex motion and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong negative pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.

• 보건교육건강증진학회지
• /
• 제19권1호
• /
• pp.45-58
• /
• 2002

This research was conducted to understand and analyze the physical awareness symptoms of college students and get fundamental research data essential to provide efficient student guidance and public health service at schools. The survey was carried out for 1 month from May 7th, 2001 to June 7th, 2001. The interviewees were 950 enrolled students at junior colleges in Daegu. 26.5% of them were men and 73.5% women. Among the surveyed, public health majors were 76.9%. Daytime students were 64.1 %, and the majority of the students, 42.8%, were atheistic. 56.0% of the students grew up in big cities, 22.2% in medium and small-sized cities, and 21.8% in farming and fishing communities. 66.1 % used public transportation. The majority of the students, 48.7%, answered that the satisfaction level for their majors was average. The result shows that the ocular fatigue was indicated as a greatest complaint, and the female students showed the higher complaint rate than the males. In the study of the complaining rate of physical symptoms by major, the public health majors showed the highest complaining rate in gasping when going up/down stairs, shoulder pain, a burning feeling on empty stomach, and leg/knee pain. On the other hand, the highest complaint factors for the technical majors were ocular fatigue and the feelings of heavy head. In the study of the complaining rate of physical symptoms by transportation, gasping during going up/down stairs and shoulder pain were most common, which were 52.2% and 36.0% respectively. In the study of the insecurity response distribution by transportation, college students who drive a car showed 3.8% and students using public transportation 3.7%. In the study of the insecurity response by subject satisfaction, students who answered dissatisfactory were 8.3%, average 3.9%, satisfied 3.0%. Therefore, it was concluded that students who were dissatisfied with their subjects showed the higher rate of insecurity response. it can be recommended that a school health education program regarding ocular fatigue and shoulder pain should be developed.

• 한국수소및신에너지학회논문집
• /
• 제30권3호
• /
• pp.201-208
• /
• 2019

Recently, a fuel reforming plant for supplying high purity hydrogen is being applied to submarines. Since steam reforming is an endothermic reaction, it is necessary to continuously supply heat to the reactor. A fuel reforming plant for a submarine needs a multi-stage burner (MSB) to acquire heat and convert the combustion gas to $CO_2+H_2O$. The MSB has problems that the combustion imbalance occurs during start-up due to the temperature restriction of the combustion gas. This problems can be solved by burning $H_2O$ together with fuel and $O_2$. In this study, the simulation results of MSB were analyzed to determine the optimum flow rate of $H_2O$ supplied to the 6-stage burner. When the flow rate of $H_2O$ was low, combustion was concentrated on the burner#6 in comparison with the burner#1-#5. This combustion concentration improved as the supply amount of $H_2O$ increased. As a results, it was necessary to supply at least 4.9 kmol/h of $H_2O$ (per 1 kmol/h of fuel) to burner#1 in order to maintain the combustion gas temperature of each stage at $750^{\circ}C$ and to convert the final stage burner gas composition to $CO_2+H_2O$.

• 기술사
• /
• 제18권2호
• /
• pp.6-15
• /
• 1985

A new process disregraded the H$_2$SO$_4$ treatment process heretofore in use, was developed and substituted for mineral base engine used oil of homemade SAE-30 grade H.V.I., which was used covering 4,500km, as samples, and the following results in research, was obtained. (1) A good quality of rerefinded base oil was obtained through roughly a course of developed processes of vacuum distillation process, solvent extraction process, neutralization treatment process and clay treatment process. (2) Through vacuum distillation process, the size of fine grains of insoluble colloid carbon that is, colloid carbon which was produced by burning of internal combustion engine oil and fuel, could be brought up and precipitated (3) The insoluble matters and admixtures could be easily dispersed and dissolved by mixing and extracting solvent disregarded the H$_2$SO$_4$ treatment process heretofore in use (4) waste matter heretofore called acid sludge in consequence of the process, did not appear at all. accordingly, the environmental pollution could be removed. (5) The troubles of corrosion to copper strip which was faults of the usual used oil refined products and peculiar offensive odor of the rerefined oil, could be solved through the neutralization process. (6) The yield of rerefined oil obtained through a course of processes was over 86 percent, and it is of practical use, not to speak of commercial value.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.464-466
• /
• 2011

본 기술논문은 최근에 공개된 문헌 및 특허 자료를 참고하여 새로운 개념의 고체 추진제를 소개하였다. 전기제어 고체 추진제는 전기에너지를 가함으로서 다중점화, 소화 및 추력 조절 제어가 가능한 추진제이다. 움직이는 부품 없이 코아 또는 끝단 연소구조를 가지는 그레인을 제조하여 직경이 3 인치인 모타를 시험 하였다. 현재 진행 중인 연구로 부터 10%이상 증가한 비추력을 가지면서 제조공정이 쉽고 높은 전기 전도성을 가지는 보다 더 새로운 고성능 ECESP를 개발하였다.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.147-152
• /
• 2006

The accidents occurred by unstable material which is easily exploded or burnt up were caused by heat and collision under the condition of relatively low temperature without oxygen, have been reported frequently. However, the amount of the unstable material is getting higher by development of fine ceramic research area even though its dangerous characteristic is disregarded. This research studied a heat stability and measured boiling point of various carpet material. Carpet has been used in home as well as general indoor usage. Now a day, carpet material which is hardly burnt has been on commercial, but its detailed unstable conditions is not mentioned. This research reports the measurement of the initial temperature of generation heat and heat-radiation change on differential scanning calorimeter (DSC). The DSC data of nylon bulked continuous filament (N-BCF) yam 100%, nylon (NY), poly propylene (PP), and a new material named polytrimethylene terephthalate (PTT) are studied and researched about the effect of them using TGA, furnace, and direct-burning experiment.

• 한국광학회지
• /
• 제13권3호
• /
• pp.235-239
• /
• 2002

본 논문에서는 고리구조 FBG공동과 DFB 레이저를 결합하여 kHz대의 극미세선폭 레이저광을 발생시키는 새로운 방법을 제안하였다. 외부 FBG와 DFB 레이저내의 Bragg격자로 이루어진 긴 공동내에 고리구조를 형성함으로써 레이저 선폭을 압축시키는 방법을 사용하였다. 손실을 최대화하면서 모드홉핑이 일어나지 않는 최대 광궤환량을 유지하기 위하여 광회전기와 가변광감쇄기를 사용하였다. 이 방법의 타당성을 검증하기 위하여 63km의 광섬유 지연선로를 사용한 자기헤테로다인 측정장치를 사용하여 레이저 선폭을 측정한 결과 자기헤테로다인 측정장치의 해상도 한계인 3kHz 이하의 선폭을 얻었다. 이는 2$\times$$10^{-8}$ nm의 선폭에 해당한다

• 건축역사연구
• /
• 제21권2호
• /
• pp.37-52
• /
• 2012

This research has set up the fire fighting general index for Fire fighting of Crowded Wooden Building Cultural Asset which is composed of traditional wooden building instinct or complex. The results of this study are as follows. First, Fire fighting general index for crowded wooden building cultural asset, it is necessary to set fire fighting priority by considering fire risk and cultural asset characteristic and establish the system to cope with fire disaster in the most effective way by arranging facilities with restricted resource. Second, Fire risk is the index to draw fire and spread risk of cultural asset by applying index calculation processes such as fire load, burning velocity and ignition material spread characteristic to various aspects such as individual building and complex and combining their results. Cultural asset importance index consists of individual building evaluation, publicity security degree, area importance evaluation and historical landscape degree evaluation. Third, for each index combination process, weight of each index is drawn on the basis of AHP analysis result that is performed to the specialists of related fields. The formula to apply and combine it is prepared to apply the model to include meaning of each index and comparative importance degree.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.750-756
• /
• 2002

The effect of equivalence ratio and velocity on the stability of flame in dump combustor was studied in an atmospheric pressure, laboratory scathe dump combustor operating natural gas. Traditionally, peak-to-peak pressure, fluctuation of the heat release rate and Rayleigh index were used to find and control the combustion instability. Cross correlation coefficients, Ci,j which is defined as the normalized value of the integration of the product of two of the mixer pressure, dump plane pressure and heat release rate, are introduced to see whether the flame is stable or not. Ci,j shows more sensitive to combustion status than Rayleigh index in steadily burning flame. Also, the result indicates that the amplitude of Ci,j between heat release and mixer pressure goes up before the flame at the rich de-stabilizing equivalence ratio near $\psi$=0.85. t means Ci:j at this case has a potential to detect the de-stablizing moment in prior to becoming unstable in dump combustor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.65-70
• /
• 2001

OH radical and NOx have been measured in a methane-air partially premixed flame using PLIF technique to define preheated air combustion characteristics. The temperature of mixture is determined by 300K, 400K, 600K and 800K below the auto-ignition temperature respectively. Flame height increases as equivalence ratio increased. As initial enthalpy is supplied, the radius of flame was increased and much amount of yellow flame in rich equivalence ratio was observed. This is due to the faster burning velocity. Also initial oxidization begins earlier as the initial temperature of mixture increased. It means that height of premixed flame front decreased. This phenomenon can be observed OH PLIF image. The qualitative analysis of OH concentration in the PLIF image shows that overall OH concentration increases with equivalence ratio and the initial temperature of mixture increased. At the preheating temperature goes up, axial gradient of OH concentration is less steep than that of lower temperature condition. This may identify that combustion reacts continuously, so preheated air combustion can evade the local heating and make high temperature indiscriminately in the overall reaction zone.