• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.409-412
• /
• 1998

The analytical method to determine europium(III) ion in aqueous solution by fluorescence spectroscopy based upon the conformational change of calmodulin in the presence of the analyte has been studied. The fiber optic chemical sensor used in this study was constructed by entrapping a fluorescein-labeled calmodulin solution, EGTA, buffer solution at the common end of a bifurcated fiber optic bundle by means of a dialysis membrane. The calibration curve to determine europium(III) ion was obtained when concentration of calmodulin, concentration of EGTA, Tris-HCl buffer solution, pH, excitation wavelength and fluorescence wavelength were $5.0{\times}10^{-5}M$, 0.50 mM, 5.0 mM, 7.0, 495 nm and 520 nm, respectively. The detection limit was $1.0{\times}10^{-11}M$ and the working range of the calibration curve for the sensor was $1.0{\times}10^{-11}M{\sim}1.0{\times}10^{-9}M$. The response time was 15 minutes. For the determination of europium(III) ion by the present method, $Na^+$ and $K^+$ ions did not interfere but $Ca^{2+}$ ion seriously interfered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2771-2778
• /
• 2009

This study was performed to solve the problem of the 2nd contamination and excessive treatment cost by determining proper quantity of hydrogen peroxide, iron catalyst, mixing method, and input mode that should be provided when Fenton oxidation (this is mostly applied to small contaminated areas such as service station sites) is applied to the excavated and diesel-contaminated soil. Soil artificially contaminated with 10000mg/kg of diesel was used for the experiment. In the batch test, diesel removal seemed to increase as the concentration of hydrogen peroxide increases. When iron catalyst was added, removal efficiency of diesel was much higher than the time when hydrogen peroxide was added solely. The removal efficiency showed greater when Fe(III) was added compared to Fe(II). Column experiment was executed on the basis of results of the batch test to investigate adequate reagent mixing and input methods. The highest efficiency was acquired in the case of separate input mode. Also, it was found that when inputting Fe(III) iron catalyst and separately inputting hydrogen peroxide after dividing the bundle in the column, removal efficiency was 92.8%, which was 9 times greater than that of the first method, 10.5%, when only hydrogen peroxide was added. Thus, it is expected that if the result of this research is applied to Fenton oxidation for the remediation of soil contaminated by diesel, the problem of the 2nd contamination and excessive treatment charge caused by excessive addition of hydrogen peroxide and iron catalyst could be solved.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.221-227
• /
• 1986

Ventricular septal defect is most common congenital cardiac anomaly in Korea and worldwide. And its clinical spectrum is well known. The anatomic classification had been undertaken by several authors, but recently Dr. Soto and Anderson's classification is widely used instead of Dr. Kirklin's it. From April. 1984 to December 1986, 99 cases of ventricular septal defects had been taken surgical repair under direct vision using conventional cardiopulmonary bypass technique at Yeungnam university hospital. The clinical spectrum was similar to other hospital, and the postoperative mortality was 2%, The most common associated anomaly was patent foramen ovale, and the most common postoperative complication was incomplete or complete right bundle branch block. The rank of defects was as followings: 45 perimembranous inlet type, 21 doubly commited subarterial type, 17, perimembranous trabecular type, and 16 perimembranous outlet type. There was no muscular and mixed type.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.229-236
• /
• 2009

There are two types of spent fuels generated from nuclear power plants, CANDU type and PWR type. PWR spent fuels which include a lot of reusable material can be considered to be recycled. CANDU spent fuels are considered to directly disposed in deep geological formation, since they have little reusable material. In this study, based on the Korean Reference spent fuel disposal System(KRS) which is to dispose both PWR and CANDU spent fuels, the more effective CANDU spent fuel disposal systems have been developed. To do this, the disposal canister has been modified to hold the storage basket which can load 60 spent fuel bundles. From these modified disposal canisters, the disposal systems to meet the thermal requirement for which the temperature of the buffer materials should not be over $100^{\circ}C$ have been proposed. These new disposals have made it possible to introduce the concept of long tenn storage and retrievabililty and that of the two-layered disposal canister emplacement in one disposal hole. These disposal concepts have been compared and analyzed with the KRS CANDU spent fuel disposal system in terms of disposal effectiveness. New CANDU spent fuel disposal concepts obtained in this study seem to improve thermal effectiveness, U-density, disposal area, excavation volume, and closure material volume up to 30 - 40 %.

• Journal of Chest Surgery
• /
• v.23 no.6
• /
• pp.1180-1190
• /
• 1990

96 patients underwent cardiac valve replacement for valvular heart diseases consecutively between February 1986 to February 1990 in the Department of Thoracic and Cardiovascular Surgery of Yeungnam University Hospital. The follow up period was between 6 months and 4.5 years postoperatively[mean 23.4$\pm$13.1 months]. 75 cases got mitral valve replacement, 6 cases, aortic valve replacement, 15 cases, double valve replacement. 30[31.2%] patients were male and 66[68.8%] were female and the age ranged from 14 to 66 years old. Early hospital death within 30 days postoperation were 5 patients[5.2%], consisting of by low cardiac output in 2, infective endocarditis in 1, multiple organ failure with sepsis in 1 patient. There was no late postoperative death. Most common early postoperative complication was wound disruption [8.7%] and then low cardiac output, pneumothorax, pleural effusion in order. Most common late postoperative complications were minor bleeding episodes[8.7%] related to anticoagulant therapy which were consisted of frequent epistaxis in 3, gum bleeding in 2, hemorrhagic gastritis in 1, hypermenorrhea in 1, hematoma in right arm in 1 patient. Valve-related complications included valve thrombosis [1.6%/ patient-year], valve failure due to pannus formation[1.1% /patient-year], prosthetic valve endocarditis[1, 1%o/patient-year] and minor anticoagulant hemorrhage[4.4% /patient-year]. 5 cases of reoperations were performed in 4 patients due to valve failure and all of them were in the mitral positions[2.7% /patient-year]. Cardiothoracic ratios in the chest X-ray decreased at the 6th month and 1st year postoperation in all patients. But in New York Heart Association[NYHA] functional class IV, no change in cardiothoracic ratio was found between 6 months and 1 year postoperation. In the echocardiogram, the size of the cardiac chambers decreased, but ejection fraction increased postoperatively in each functional class. In the electrocardiogram, decreases were found in the incidence of atrial fibrillation, left atrial enlargement, left ventricular hypertrophy with right bundle branch block increasing postoperatively in each functional class. The actuarial survival rate was 98.4% for all patients, 98.7% for mitral valve replacement, 83.8% for aortic valve replacement, and 80% for double valve replacement at the end of a 4.5 year follow up period. Meanwhile the actuarial freedom rate was 91.5% for prosthetic valve endocarditis, 91.6% for thromboembolism, 89.0% for prosthetic valve failure and 83.7% for minor anticoagulant hemorrhage. Preoperative NYHA class III and IV were 75% of all patients, but 95% of all patients were up graded to NYHA class I and II postoperatively.

• Korean Parent-Child Health Journal
• /
• v.3 no.2
• /
• pp.49-66
• /
• 2000

Pregnancy is a task of creation in which a women mobilizes her self and the resources available to her in the generation of a new person. Through the pregnancy, a mother has formed the new human relationship with a fetus. Maternal-fetal relationship is considered one of mechanism making the relationship of mother and child. It is important to well-being of mother and fetus, too. The earliest interaction between a mother and her child is during prenatal period. Maternal-fetal dyad is unique and perceived interactions with the fetus make the pregnancy real for the mother. Maternal behavior is "instinctive" and is formed in early childhood by copy of the mother. But, Rubin argues that this behavior is an open intellectual system rather than a prepackaged bundle of traits. There is openness to new learning and a high value placed on knowing which occurs with silent organization in thought. Thus, nurses and other health professionals provide prenatal care that optimally is part of the environment in which the maternal-fetal dyad develops. Thus it is appropriate for nurses to increases their understanding of the dyad and to explore ways to enhance its development. This study focusses on the interaction ability and response of fetus, and the maternal-fetal interaction. The research of fetal responses that involve physiological changes and motor movement have been shown to coccur to both external sensory stimuli and to maternal emotional states. The fetus does also have sensory capacity to be aware of some maternal behaviors, and the motor ability to respond in a way the mother can notice. Thus, very rudimentary interactions appear to be possible. Maternal awareness of fetal activity was supported by several studies. More interesting to the present study are description of maternal-fetal interaction and the finding that there appear to be levels of sensitivity to the fetus involved in maternal-fetal interactions. First, recognition comes that the fetus is separate from the maternal self. Next, the fetus engages in. Lastly, the parent may describe active interaction with the fetus, believing that mother and fetus are communicating on a meaningful level. Several interventions, developed to promote more active interaction between mother and fetus, have been reviewed. In general, the parents were taught to stimulate the fetus and to notice the fetus' responses. This type of intervention might increase the mother's sensitivity to her unborn baby, and she may have a head start toward learning how to res pond sensitivity to the newborn infant. Research In the area of maternal-fetal interaction is scarce. Sensitive behavior is construed as an appropriate and timely response to a signal of need from another person, but no such signal of need can be claimed regarding the fetus. The highest level of maternal-fetal interaction, therefore, might be based more on maternal representations of the imagined fetus than on factual evidence of fetal participation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.35-46
• /
• 2007

In the study digital imagery was used to examine asphalt concrete pavements. With digitally mastered-image information that was filmed with a video camera fixed on a car travelling on road at a consistent speed, a road surface management system that can gain road surface information (Crack, Rutting, IRI) was developed using an object-oriented language "Delphi". This system was designed to improve visualized effects by animations and graphs. After analyzing the accuracy of 3-D coordinates of road surfaces that were decided using multiple image orientation and bundle adjustment method, the average of standard errors turned out to be 0.0427m in the X direction, 0.0527m in the Y direction and 0.1539m in the Z direction. As a result, it was found to be good enough to be put to practical use for maps drawn on scales below 1/1000, which are currently producted and used in our country, and GIS data. According to the analysis of the accuracy in crack width on 12 spots using a digital video camera, the standard error was found to be ${\pm}0.256mm$, which is considered as high precision. In order to get information on rutting, the physically measured cross sections of 4 spots were compared with cross sections generated from digital images. Even though a maximum error turned out to be 10.88mm, its practicality is found in work efficiency.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.1
• /
• pp.12-20
• /
• 2010

Purpose: Industrial punch accidents involving fingers cause segmental injuries to tendons and neurovascular bundles. Although multiple-level segmental amputations are not replanted to regain function, most patients with an amputated finger want to undergo replantation for cosmetic as much as functional reason. The authors describe four cases of digital amputation by an industrial punch that involved the reinstatement of the amputated finger involving a joint and neurovascular bundle. Amputated segments were replanted to restore amputated surfaces and distal segments. Methods: A single institution retrospective review was performed. Inclusion criteria of punch injuries requiring replantation were applied to patients of all demographic background. Injury extent (size, tissue involvement), operative intervention, pre- and postoperative hand function were recorded. Result: Four cases of amputations were treated at our institute from 2004 to 2008 from industrial punch machine injury. Average patient age was 32.5 years (25~39 years) and there were three males and one female. Sizes of amputated segments ranged from $1.0{\times}1.0{\times}1.2\;cm^3$ to $3{\times}1.5{\times}1.6\;cm^3$. Tenorrhaphy was conducted after fixing fractured bone of the amputated segments with K-wire. Proximal and distal arteries and veins were repaired using the through & through method. The average follow-up period was thirteen months (2~26 months), and all replanted cases survived. Osteomyelitis occurred in one case, skin grafting after debridement was performed in two cases. Because joints were damaged in all four cases, active ranges of motion were much limited. However, a secondary tendon graft enhanced digit function in two cases. The two-point discrimination test showed normal values for both static and dynamic tests for three cases and 9 mm and 15 mm by dynamic and static testing, respectively, in one case. Conclusion: Though amputations from industrial punch machines are technically challenging to replant, our experience has shown it to be a valid therapy. In cases involving punch machine injury, if an amputated segment is available, the authors recommend that replantation be considered for preservation of finger length, joint mobility, and overall functional recovery of the hand.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.335-341
• /
• 2018

This study is a study on effective stitching technique for video recorded by using a dual-lens $360^{\circ}$ camera composed of two fisheye lenses. First of all, this study located a problem in the result of stitching by using a bundled program. And the study was carried out, focusing on looking for a stitching technique more efficient and closer to perfect by comparatively analyzing the results of stitching by using Autopano Video Pro and Autopano Giga, professional stitching program. As a result, it was shown that the problems of bundled program were horizontal and vertical distortion, exposure and color mismatch and unsmooth stitching line. And it was possible to solve the problem of the horizontal and vertical by using Automatic Horizon and Verticals Tool of Autopano Video Pro and Autopano Giga, problem of exposure and color by using Levels, Color and Edit Color Anchors and problem of stitching line by using Mask function. Based on this study, it is to be hoped that $360^{\circ}$ VR video content closer to perfect can be produced by efficient stitching technique for video recorded by using dual-lens $360^{\circ}$ camera in the future.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.11-21
• /
• 1996

This study has observed the development, structure and distribution of oil canals in mitsuba, seri, ashitaba and hamabohu, that are condiment herbs belonging to the Umbelliferae family, using a light microscope. Oil canals were found in the petioles, leaf blades, stems, roots, hypocotyls and cotyledons. Oil classified into distribution due to ring vascular bundles, as in mitsuba and seri, and distribution due to diffuse vascular bundles, as in ashitaba and hamabohu. Oil canal development in the cortex due to petiole thickening was followed by the development of collenchyma and vascular bundles. However, no vascular bundles were formed in some cases. Many oil canals were found in the periphery of the petioles. Oil canals in leaf blades were found on the adaxial and abaxial sides on the veins. Those around the main veins were larger. Steam oil canals were found in the cortex and pith in mitsuba and seri, and in the cortex and fundamental tissues around the xylem, in ashitaba and hamabohu, while those in the roots were found in the pericycle in mitsuba and seri, and in the collenchyma-like tissues and phloem in ashitaba and hamabohu. The transverse sections of oil canals were round or elliptical. The secretory cells in the cortex and pith were smaller than the neighboring parenchyma cells, while they were larger than the neighboring parenchyma cells in the phloem.