• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.118-121
• /
• 2007

Bulk metallic glass (BMG)/crystalline composites comprising a copper based BMG alloy and crystalline nickel were produced by means of eloctroless plating of nickel on $Cu_{54}Zr_{22}Ti_{18}Ni_6$ BMG powder and subsequent consolidation using spark plasma sintering. The plastic deformation behavior of BMG/crystalline composites was examined by uniaxial compression test at various temperatures in the supercooled liquid region (SLR) of the BMG alloy. The evolution of strain states during uniaxial compression was tackled by microstructure observations. Deformation temperature played an important role in the deformation behavior of BMG/crystalline composites, which was attributed to a strong temperature dependence of the flow stress of the BMG alloy in the SLR. BMG/crystalline composites deformed homogenously in the temperature range where the flow stress of the BMG alloy was close to that of crystalline nickel. In contrast, inhomogeneous deformation was observed in the temperature range where the flow stress of the BMG alloy largely differs from that of crystalline nickel.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.51-57
• /
• 2017

In the present study, the long-pitch roller-chain of a continuous ship unloader is studied. It is the vertical excavating and transporting the cargo has carried in bulk amount. The size of the pitch in the long-pitch roller chain is about 350 mm. The finite element technique is used for the structural safety of the roller chain. The objective of the study is to perform a dynamic analysis of the load at the point of contact with the sprocket of the roller chain, and analyze each point in the stress of the chain's components by using load. From the tooth sprocket optimization analysis, the results show an optimal design. Static structural analysis was safe. Contact analysis results show the greatest stress on the sprocket. By increasing the tooth size, the stress was reduced.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.191-201
• /
• 1997

Non-passivated electrolytic tinplates withour conventinal chemical treatment self-oxidize in ambient atmosphere to from yellow stain on the outermost surface during the long-term storage. The degree of yellowness of the stain increased linerly with the oxide thickness due to the interfeefence color of the $SnO_2$ Even though the thickness of the oxide layer was very thin, less than 100$\AA$ , it exerts an undesirable influence on the can-making processes, particularly the stripping behavior after ironing. Investigations were carried out on the morphologies of the coating layer, the changes in oxide thickness during successive can-making processes and the averge friction coefficients with the different oxide thinkness. These oxide layers were broken up and distributed within the bulk tin coating during the ironing process. This redistribution of the oxide layer prvented smooth pressing-aside of the tin coating layer, resulting in an increase in the ironing friction coefficient. As the friction was increased, the residual stress along the can wall thinkness(i.e., the hoop stress) was also increased. Due to both the oxibe layer accumulation, which increased the friction coefficient, and the hoop stress, can stripping efficiency without roll-back is reduced.

• 접착 및 계면
• /
• 제21권1호
• /
• pp.20-26
• /
• 2020

Single lap-shear joints (SLJ) specimens with and without partial round fillets were fabricated to measure the average shear strength of adhesives. The effects of the length of the adherend on the SLJ specimens were also investigated. An epoxy adhesive was used to bond aluminum alloy. Tensile tests were performed on the adhesive bulk specimens to measure the mechanical properties. The finite element analysis (FEA) method was used to measure the adhesive stress distributions, i.e., the peel and shear stresses, on the bonded part. The experimental results revealed that the specimen consisting short length of adherend and without the partial round fillets exhibited the smallest average shear strength of adhesive among the investigated specimens. FEA revealed that the low average shear strength for the specimen with a short adherend length was caused by high stress concentrations on the adhesive at the edge of the bonded part.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.19-26
• /
• 1994

Sulfonated poly (ethyleneoxide)-grafted polyurethane (PU-PEO-$SO_3$) prepared by bulk modification was coated on a blood sac for electrohydraulic left ventricular assist device (ELVAD) implanted in dogs and its in vivo blood compatibility on shear stress was studied as compared with untreated Po. The effect of the wall shear stress on the protein adsorption unlike platelet adhesion is dependent on the surface characteristics of the material, although less proteins seem to be adsorbed in the region of the high shear stress. The thickness of total proteins adsorbed on PU-PEO-SOJ (400 ${\AA}$) by trans¬mission electron microscopy(TEM) was considerably lower than that of untreated PU(l,000~1,600 ${\AA}$), but PU-PEO-$SO_3$ showed high albumin adsorption, low fibrinogen and IgG adsorption, and low platelet adhesion as compared with untreated PU, suggesting that PU-PEO-$SO_3$ is more in vivo blood compatible. Therefore, it appears that such a blood compatible PU-PEO-$SO_3$ is useful for blood contacting biomaterials including artificial organs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.63-68
• /
• 2005

The nanoindentation technique is widely used to investigate the mechanical properties of nano-microscale materials. The nanoindentation method for assessing mechanical properties at low loads and shallow depths is already well established fur the characterization of thin films as well as bulk materials. In this study, we evaluated residual stress in DLC and Au thin films usign nanoindentation technique with a new stress-relaxation model. Moreover, We suggest a composite hardness equation and quantify the magnitude of hardness increase by using an equation based on the interface hardness and the interface thickness, derived by comparing results derived from this equation and those determined in nanoindentation tests. Finally, We present an indentation size effect (ISE) model that extends the available contact depth for ISE application down to several tens of nanometers by considering the tip bluntness effect.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.451-463
• /
• 2020

In this paper, a new semi-analytical solution for estimating the pull-in parameters of electrically actuated functionally graded (FG) nanobeams is proposed. All the bulk and surface material properties of the FG nanoactuator vary continuously in thickness direction according to power law distribution. Here, the modified couple stress theory (MCST) and Gurtin-Murdoch surface elasticity theory (SET) are jointly employed to capture the size effects of the nanoscale beam in the context of Euler-Bernoulli beam theory. According to the MCST and SET and accounting for the mid-plane stretching, axial residual stress, electrostatic actuation, fringing field, and dispersion (Casimir or/and van der Waals) forces, the nonlinear nonclassical equation of motion and boundary conditions are obtained derived using Hamilton principle. The proposed semi-analytical solution is derived by employing Galerkin method in conjunction with the Particle Swarm Optimization (PSO) method. The proposed solution approach is validated with the available literature. The freestanding behavior of nanoactuators is also investigated. A parametric study is conducted to illustrate the effects of different material and geometrical parameters on the pull-in response of cantilever and doubly-clamped FG nanoactuators. This model and proposed solution are helpful especially in mechanical design of micro/nanoactuators made of FGMs.

• 한국유기농업학회지
• /
• 제28권3호
• /
• pp.417-430
• /
• 2020

이상기후로 인한 건조 스트레스에 의해 식물의 기공전도도와 광합성의 감소로 생장과 작물생산량이 감소하는 피해가 발생하고 있다. 이러한 식물의 스트레스를 완화하는 유용 곰팡이를 선발하기 위해 국내 농경지에서 41 균주를 분리하였으며, 발아율 검사로 2종의 곰팡이를 선발하였으며, 식물검정을 통해 최종 Trichoderma sp. GL02를 선발하였다. GL02를 고추 식물체에 처리하였을 때, 대조구에 비해 기공전도도가 증가하고, MDA와 전기전도도는 감소하는 것으로 보아, GL02를 처리한 고추 식물체는 건조 스트레스가 완화되며, 건조 후 재관수하였을 때 회복도 효과적이었다. 이러한 결과는 GL02는 고추 식물체에 건조 스트레스를 완화시키는 유용한 소재로 사용될 수 있음을 시사한다. 또한, 추후 포장 실험을 통하여 Trichoderma sp. GL02의 건조 스트레스 완화 효과가 고추 생산량과 연관이 있는지 확인해 볼 예정이다.

• 소성∙가공
• /
• 제31권6호
• /
• pp.376-383
• /
• 2022

The potential damage region of a WC-Co cemented carbide die is investigated for cold forging process of a wheel-nut by numerical simulation with its chemical composition considered. Numerical simulation is utilized to calculate internal stress, especially for the WC-Co die, during the forging process. Finite element model is established, in which the elasto-plastic properties are applied to the work-piece of bulk steel, and elastic properties are considered for the lower die insert of the WC-Co alloy. This stress analysis enables to distinguish the potential damage regions of the WC-Co die. The regions from calculation are comparatively analyzed along with the crack area observed in the die after repetitive manufacturing. Effect of chemical composition of the WC-Co is also evaluated on characteristics of potential damage region of the die with variance of mechanical properties considered. Derived from Mohr-Coulomb fracture model, furthermore, a new stress index is presented and used for die stress analysis. This index inherently considers hydrostatic pressure and is then capable of deducing wide range of its distribution for representing stress state by modification of its parameter implying pressure sensitivity.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.25-25
• /
• 2017

Inflorescence architecture mainly contributes to final grain yield in crops. Sorghum inflorescence is basically composed of one fertile sessile spikelet (SS) and two infertile pedicellate spikelets (PS). To identify regulatory factors involved in the inflorescence architecture, we screened an EMS mutagenesis population from the pedigreed sorghum mutant library. We found inflorescent architecture mutants, named as multi-seed mutants, msd, with gained fertile ability in PS and also an increased number of floral branches. In natural sorghum populations, it is not common that are fertile. A detailed dissection of developmental stages of wild type and msd1 mutant described that the PS in wild type do not have floral organs, including ovary, stigma, filament and anther, while the msd1 mutants generate intact floral organ in the sessile spikelet. We found MSD1 encoded a TCP transcription factor using bulk segregant analysis (BSA) of F2 population, and was a strongly enriched expression during inflorescence developmental stages. We proposed that MSD1 functions to suppress floral organ maintenance at PS during inflorescence development in Sorghum. To explore the regulatory network associated with PS fertility, whole genome expression profiling was performed at 4 different developmental stages in 6 various tissue types between wild type and msd1. Taken together, we demonstrated that MSD1 was involved in the plant hormone and maybe influenced program cell death in PS via the activation of plant hormonal pathway.