Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on the Load Analysis in Accordance with the Contact Position between a High-Load Long-Pitch Roller Chain and Sprocket

고부하 롱피치 롤러체인과 스프라켓 접촉 위치에 따른 하중분석에 관한 연구

  • Kim, Chang-Uk (School of Mechanical Engineering, Changwon National UNIV.) ;
  • Park, Seung Bin (School of Mechanical Engineering, Changwon National UNIV.) ;
  • Song, Jung-Il (School of Mechanical Engineering, Changwon National UNIV.)
  • Received : 2016.07.25
  • Accepted : 2016.10.03
  • Published : 2017.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In the present study, the long-pitch roller-chain of a continuous ship unloader is studied. It is the vertical excavating and transporting the cargo has carried in bulk amount. The size of the pitch in the long-pitch roller chain is about 350 mm. The finite element technique is used for the structural safety of the roller chain. The objective of the study is to perform a dynamic analysis of the load at the point of contact with the sprocket of the roller chain, and analyze each point in the stress of the chain's components by using load. From the tooth sprocket optimization analysis, the results show an optimal design. Static structural analysis was safe. Contact analysis results show the greatest stress on the sprocket. By increasing the tooth size, the stress was reduced.

Keywords

References

  1. Choi, W., Vibration of Roller Chain Drives with and without a Tensioner, PhD Thesis, University of Michigan, 2009
  2. Dubowsky, S. and Freudenstein, F., ''Dynamic analysis of mechanical systems with clearances, part 1: Formation of dynamic model'', Journal of Engineering for Industry, ASME Vol. 93, No. 1, pp. 305-309, 1971 https://doi.org/10.1115/1.3427895
  3. Dubowsky, S. and Freudenstein, F., ''Dynamic analysis of mechanical systems with clearances, part 2: Dynamic response'', Journal of Engineering for Industry, ASME Vol. 93, No. 1, pp. 310-316, 1971 https://doi.org/10.1115/1.3427896
  4. Wang, K. W. and Liu, S. P., ''On the noise and vibration of chain drive systems'', The Shock and Vibration Digest Vol. 23, No. 4, pp. 8-13, 1991 https://doi.org/10.1177/058310249102300404
  5. Wang, K. W., Liu, S. P., Hayek, S. I. and Chen, F. H., ''On the impact intensity of vibrating axially moving roller chains'', Vibration and Acoustics Vol. 114, No. 3, pp. 397-403, 1992 https://doi.org/10.1115/1.2930275
  6. Kim, M. S., Dynamic Behavior of Roller Chain Drives at Moderate and High Speeds, PhD Thesis, University of Michigan, 1990
  7. Kim, M. S. and Johnson, G. E., 'A general, multibody dynamic model to predict the behavior of roller chain drives at moderate and high speeds'', Advances in Design Automation Vol. 1, pp. 257-268, 1992
  8. Choi, W. and Johnson, G. E., 'Transverse vibrations of roller chain drive with tensioner', Vibrations of Mechanical Systems and the History of Mechanical Design, ASME, DE-Vol. 63, pp. 19-28, 1992
  9. Choi, W. and Johnson, G. E., ''Vibration of the roller chain drives at low , medium and high operating speeds'', Vibration of Mechanical Systems and the History of Mechanical Design, ASME, DE-Vol. 63, pp. 29-40, 1992
  10. Conwell, J. C. and Johnson, G. E., 'Experimental investigation of link tension and the roller-sprocket impact in roller chain drives', Mech. Mach. Theory Vol. 31, No. 4, pp. 533-544, 1996 https://doi.org/10.1016/0094-114X(95)00070-F
  11. Chang-Uk Kim, Jin-Chul Park, Jung-Il Song. "Study of Structural Reliability of Pipe-Fitting Collet Tool." Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 140-145, 2015 https://doi.org/10.14775/ksmpe.2015.14.4.140
  12. C. U. Kim, J. C. Park, J. Y. Chung, J. I. Jung. "Long-pitch heavy-duty roller chain structural analysis and design of light weight." Proceedings of the KSMPE Conference, p13, 2015
  13. C. U. Kim, M. S. Jun, J. C. Park, S. H. Cha, J. I. Jung.. "Structural Safety Assessment of Pipe Fitting Tool." Proceedings of the KSMPE Conference, p83, 2014

Cited by

  1. A Study on the Measurement Method of Spatial Position Compensation for Virtual Reality and Real Space Synchronization vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.136
  2. 고부하 롱피치 롤러체인의 내마모성 평가 vol.34, pp.9, 2017, https://doi.org/10.7736/kspe.2017.34.9.647
  3. A Study on the Process Simulation Analysis of the High Precision Laser Scriber vol.18, pp.7, 2017, https://doi.org/10.14775/ksmpe.2019.18.7.056