• Journal of Environmental Impact Assessment
• /
• v.24 no.1
• /
• pp.16-34
• /
• 2015

Impervious covers(IC) are artificial structures, such as driveways, sidewalks, building's roofs, and parking lots, through which water cannot infiltrate into the soil. IC is an environmental concern because the pavement materials seal the soil surface, decreasing rainwater infiltration and natural groundwater recharge, and consequently disturb the hydrological cycle in a watershed. Increase of IC in a watershed can cause more frequent flooding, higher flood peaks, groundwater drawdown, dry river, and decline of water quality and ecosystem health. There has been an increased public interest in the institutional adoption of LID(Low Impact Development) and GI(Green Infrastructure) techniques to address the adverse impact of IC. The objectives of this study were to construct the modeling site for a samll urban watershed with the Storm Water Management Model(SWMM), and to evaluate the effect of various LID techniques on the control of rainfall runoff processes and non-point pollutant load. The model was calibrated and validated using the field data collected during two flood events on July 17 and August 11, 2009, respectively, and applied to a complex area, where is consist of apartments, school, roads, park, etc. The LID techniques applied to the impervious area were decentralized rainwater management measures such as pervious cover and green roof. The results showed that the increase of perviousness land cover through LID applications decreases the runoff volume and pollutants loading during flood events. In particular, applications of pervious pavement for parking lots and sidewalk, green roof, and their combinations reduced the total volume of runoff by 15~61 % and non-point pollutant loads by TSS 22~72 %, BOD 23~71 %, COD 22~71 %, TN 15~79 %, TP 9~64 % in the study site.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.371-379
• /
• 2015

This study is purposed to seek the characteristics of both asbestos in accordance with acid and heat treatment for chrysotile and amosite used mainly as building materials. Results of acid treatment, the refractive index, the elongation sign, the extinction of acid-treated chrysotile were mostly similar to those of untreated chrysotile regardless of pH, elapsed time. But the characteristics of acid-treated chrysotile were different from those of untreated chrysotile after 8 weeks, at pH 1.2 acidic solution. When chrysotile treated with acid, weight ratio (%) of O and Mg fluctuated greatly in accordance with acid treatment unlike Si. But the change of constituents ratio (%) was small as time passed after acid treatment. The refractive index, the elongation sign and the extinction of acid-treated amosite were mostly similar to those of untreated amosite regardless of pH, elapsed time. When amosite was treated with acid, weight ratio (%) of Fe slightly increased. But in case of O, a contrary tendency was seen. Results of heat treatment, the higher the temperature, the more increased the refractive index of chrysotile. When chrysotile was heated for 10 minutes at $1,100^{\circ}C$, the elongation sign of chrysotile changed from positive(+) to negative(-). The extinction of chrysotile didn't change apparently in accordance with heat treatment. Also weight ratio (%) of O and Mg fluctuated greatly in accordance with heat treatment unlike Si. The higher the temperature, the more increased the refractive index of amosite. The elongation sign and the extinction of amosite didn't change apparently in accordance with heat treatment. Also weight ratio (%) of O and Fe fluctuated greatly in accordance with heat treatment. But weight ratio (%) of Si and Mg of heated amosite were mostly similar to those of untreated amosite regardless of temperature, heating time.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.868-882
• /
• 2009

In this paper, channel model and wireless link performance analysis for the short-range wireless communication system applications in the terahertz frequency which is currently interested in many countries will be described. In order to realize high data rates above 10 Gbps, the more wide bandwidths will be required than the currently available bandwidths of millimeter-wave frequencies, therefore, the carrier frequencies will be pushed to THz range to obtain larger bandwidths. From the THz atmospheric propagation characteristics based on ITU-R P.676-7, the available bandwidths were calculated to be 68, 48 and 45 GHz at the center frequencies of 220, 300 and 350 GHz, respectively. With these larger bandwidths, it was shown from the simulation that higher data rate above 10 Gbps can be achieved using lower order modulation schemes which have spectral efficiency of below 1. The indoor propagation delay spread characteristics were analyzed using a simplified PDP model with respect to building materials. The RMS delay spread was calculated to be 9.23 ns in a room size of $6\;m(L){\times}5\;m(W){\times}2.5\;m(H)$ for the concrete plaster with TE polarization, which is a similar result of below 10 ns from the Ray-Tracing simulation in the reference paper. The indoor wireless link performance analysis results showed that receiver sensitivity was $-56{\sim}-46\;dBm$ over bandwidth of $5{\sim}50\;GHz$ and antenna gain was calculated to be $26.6{\sim}31.6\;dBi$ at link distance of 10m under the BPSK modulation scheme. The maximum achievable data rates were estimated to be 30, 16 and 12 Gbps at the carrier frequencies of 220, 300 and 350 GHz, respectively, under the A WGN and LOS conditions, where it was assumed that the output power of the transmitter is -15 dBm and link distance of 1 m with BER of $10^{-12}$. If the output power of transmitter is increased, the more higher data rate can be achieved than the above results.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.85-92
• /
• 2009

A concrete is considered unfriendly-environmental material because it uses cement which emits much $CO_2$ during producing process. However, a concrete absorbs $CO_2$ through carbonation process during service life. In this paper how much concrete absorbs $CO_2$ through carbonation was calculated using 1) concentration of carbonatable substances in concrete, 2) carbonated volume of concrete, 3) molecular weight of $CO_2$ based on references and the method was proposed. $CO_2$ emission from producing $1m^3$ concrete was calculated based on $CO_2$ emission datum of materials used in concrete. From using these methods that calculate $CO_2$ emission and absorption of concrete, assessment of $CO_2$ emission-absorption against a real apartment was conducted by subtracting absorption $CO_2$ according to service life from $CO_2$ emission in the process of making concrete. As a result, a ratio of absorption over emission of $CO_2$ through concrete carbonation according to service life 40, 60, 80 years was assessed about 3.65, 4.47, 5.18%. An objective of this study is to propose how to calculate emission - absorption of $CO_2$ from producing and using concrete. Although the result value, emission - absorption of $CO_2$, is 5.18% very low when the service life of an apartment is 80years, the value can be improved by reducing emission from using blended cement such as blast furnace slag or increasing replacement ratio of cement and increasing carbonated volume of concrete from expanding service life of a building. This study may be useful when $CO_2$ emission - absorption of concrete is evaluated in the further study.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.1 s.35
• /
• pp.29-53
• /
• 2005

The purpose of this study is to investigate the education practice of creativity perceived by adolescents and secondary teachers. The subjects in this study are 305 secondary students and 133 secondary school teachers, who have completed questionnaires of 'Education Practice of Creativity' and 'Creativity Fostering Teacher Behavior', The results of this study are as follows: (1) It is found that most adolescents and teachers recognized the need and importance of creativity-fostered education in school. However. the degree of adolescents' and teacher's understanding and satisfaction of creativity-fostered education in school is low. Half of the adolescents have received creativity-fostered education for over three years but half of the teachers have not performed or started to perform creativity-fostered education. Main obstacles of creativity-fostered education in school are lack of understanding creativity-fostered education, lack of teaching methods. teaching materials and teaching time. Antecedents for developing creativity-fostered education are building school climate for creativity-fostered education and selecting and applying various teaching contents. (2) Adolescents' satisfaction of creativity-fostered education have meaningful differences with gender. Also, adolescents' necessity, satisfaction, importance of creativity-fostering education. and creativity-fostered teacher behavior have meaningful differences with grade. (3) There are significant differences in the necessity, importance, interest, and understanding of creativity-fostered education according to a teacher's gender. Also. there are significant differences in the necessity and the understanding of creativity-fostered education according to a teacher's age. (4) There are significant differences between adolescents and teachers in the necessity, satisfaction, importance, interest and understanding of creativity-fostered education and creativity-fostered teacher behavior. (5) There are significant correlations among the necessity, satisfaction, importance, interest of creativity-fostered education and the creativity-fostered teacher behavior.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.107-119
• /
• 2014

Purpose : To efficiently evaluate phased array coil performance using a software tool box with which we can make visual comparison of the sensitivity of every coil element between the real experiment and EM simulation. Materials and Methods: We have developed a $C^{{+}{+}}$- and MATLAB-based software tool called Phased Array Coil Evaluator (PACE). PACE has the following functions: Building 3D models of the coil elements, importing the FDTD simulation results, and visualizing the coil sensitivity of each coil element on the ordinary Cartesian coordinate and the relative coil position coordinate. To build a 3D model of the phased array coil, we used an electromagnetic 3D tracker in a stylus form. After making the 3D model, we imported the 3D model into the FDTD electromagnetic field simulation tool. Results: An accurate comparison between the coil sensitivity simulation and real experiment on the tool box platform has been made through fine matching of the simulation and real experiment with aids of the 3D tracker. In the simulation and experiment, we used a 36-channel helmet-style phased array coil. At the 3D MRI data acquisition using the spoiled gradient echo sequence, we used the uniform cylindrical phantom that had the same geometry as the one in the FDTD simulation. In the tool box, we can conveniently choose the coil element of interest and we can compare the coil sensitivities element-by-element of the phased array coil. Conclusion: We expect the tool box can be greatly used for developing phased array coils of new geometry or for periodic maintenance of phased array coils in a more accurate and consistent manner.

• Korean Security Journal
• /
• no.1
• /
• pp.351-370
• /
• 1997

This study concerns possible measures to prevent separatists' terrorist acts against overseas Korean businessmen. Of late, many Korean enterprises are helping a number of foreign countries develop their economy, by building factories and manning regional offices in those countries. But recent development of terrorism especially against Korean businessmen is alarming. This report discusses the need for Korean enterprises heading overseas to prepare themselves with awareness of terrorism and possible protective measures against it, besides their routine pursuance of profits; and for the government and prospective enterprises to refrain from investing in those countries having active separatist movements. If an investment has become inevitable, a careful survey of the region in conflict should be conducted and self-protective measures should be put in place through security information exchange, emergency coordination and training of personnel, etc. This study will first review the past terrorist incidents involving employees of overseas Korean enterprises, and then will focuss on seeking effective measures on the basis of the reported incidents. In carrying out the study, related literature from both home and abroad have been used along with the preliminary materials reported and known on the Internet from recent incidents. 1. The separatist movements of minority groups Lately, minority separatist groups are increasingly resorting to terrorism to draw international attention with the political aim of gaining extended self rule or independence. 2. The state of terrorism against overseas Korean enterprises and Koreans Korean enterprises are now operating businesses, and having their own personnel stationed, in 85 countries including those in South East Asia and Middle East regions. In Sri Lanka, where a Korean enterprise recently became a target of terrorist bombing, there are 75 business firms from Korea and some 700 Korean employees are stationed as of August 1996. A total of 19 different terrorist incidents have taken place against Koreans abroad since 1990. 3. Terrorism preventive measures Terrorism preventive measures are discussed in two ways: measures by the government and by the enterprises. ${\blacktriangleleft}$ Measures by the government - Possible measures at governmental level can include collection and dissemination of terrorist activity information. Emphasis should be given to the information on North Korean activities in particular. ${\blacktriangleleft}$ Measures by individual enterprises - Organizational security plan must be established by individual enterprises and there should also be an increase of security budget. A reason for reluctant effort toward positive security plan is the perception that the security budget is not immediately linked to an increment of profit gain. Ensuring safety for overseas personnel is a fundamental obligation of an enterprise. Consultation and information exchange on security plan, and an emergency support system at a threat to security must be sought after and implemented. 4. Conclusion Today's terrorism varies widely depending on reasons and causes, and its means has become increasingly informationalized and scientific as well while its method is becoming more clandestine and violent. Terrorist organizations are increasingly aiming at enterprises for acquisition of budgets needed for their activities. Korean enterprises have extended their business realm to foreign countries since 1970, exposing themselves to terrorism. Enterprises and their employees, therefore, should establish their own security measures on the one hand while the government must provide general measures, on the other, for the protection of the life and property of Korean residents abroad from terrorist attacks. In this regard, set-up of a counter terrorist organization that coordinates the efforts of government authorities in various levels in planning and executing counter terrorist measures is desired. Since 1965, when the hostile North Korea began to step up its terrorist activities against South Koreans, there have been 7 different occasions of assassination attempt on South Korean presidents and some 500 cases of various kidnappings and attempted kidnappings. North Korea, nervous over the continued economic growth and social stabilization of South Korea, is now concentrating its efforts in the destruction and deterioration of the national power of South Korea for its earlier realization of reunification by force. The possibility of North Korean terrorism can be divided into external terrorist acts and internal terrorist acts depending on the nationality of the terrorists it uses. The external terrorist acts include those committed directly by North Korean agents in South Korea and abroad and those committed by dissident Koreans, hired Korean residents, or international professionals or independent international terrorists bought or instigated by North Korea. To protect the life and property of Korean enterprises and their employees abroad from the threat of terrorism, the government's administrative support and the organizational efforts of enterprises should necessarily be directed toward the planning of proper security measures and training of employees. Also, proper actions should be taken against possible terrorist acts toward Korean business employees abroad as long as there are ongoing hostilities from minority groups against their governments.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.845-859
• /
• 2020

Climate change and recent heat waves have drawn public attention toward other environmental issues, such as water pollution in the form of algal blooms, chemical leaks, and oil spills. Water pollution by the leakage of chemicals may severely affect human health as well as contaminate the air, water, and soil and cause discoloration or death of crops that come in contact with these chemicals. Chemicals that may spill into water streams are often colorless and water-soluble, which makes it difficult to determine whether the water is polluted using the naked eye. When a chemical spill occurs, it is usually detected through a simple contact detection device by installing sensors at locations where leakage is likely to occur. The drawback with the approach using contact detection sensors is that it relies heavily on the skill of field workers. Moreover, these sensors are installed at a limited number of locations, so spill detection is not possible in areas where they are not installed. Recently hyperspectral images have been used to identify land cover and vegetation and to determine water quality by analyzing the inherent spectral characteristics of these materials. While hyperspectral sensors can potentially be used to detect chemical substances, there is currently a lack of research on the detection of chemicals in water streams using hyperspectral sensors. Therefore, this study utilized remote sensing techniques and the latest sensor technology to overcome the limitations of contact detection technology in detecting the leakage of hazardous chemical into aquatic systems. In this study, we aimed to determine whether 18 types of hazardous chemicals could be individually classified using hyperspectral image. To this end, we obtained hyperspectral images of each chemical to establish a spectral library. We expect that future studies will expand the spectral library database for hazardous chemicals and that verification of its application in water streams will be conducted so that it can be applied to real-time monitoring to facilitate rapid detection and response when a chemical spill has occurred.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.46-57
• /
• 2014

This study contemplated the gardening culture from the pictures, which the scholars of late Joseon Dynasty, the aspects of garden landscapes and garden use behaviors are drawn as follows. 1. The yard by the detached house for men and guest in front of the premises(Sarang Madang) and backyard were the major places for Ahoi(social gatherings of the scholars). The mansions had interests in the management of the outer garden beyond the house wall with building structures like the pavilions on the high walls and side gates. This management and the selection of location anticipating in advance of the management are noteworthy. 2. Only house gardens had plant pots with flowers and the small flower bed(Hwa-O) at Sarang Madang occasionally had plant pots without flowers and oddly shaped stone pots and equipped pine branch eaves and traditional awnings made of plant material like a trellis. 3. The oddly shaped stones were significant landscape elements in the gardens of houses and villas. Some of them were depicted as the Taihu stone and this draws attention to the question of whether the Taihu stone was actually used in the garden of late Joseon Dynasty. 4. The gardens in villas accommodated the borrowed scenery with various materials like wooden fences, bamboo or reed fences, mud walls. They also had the artificial gardens with some odd shaped stones, old pines, bamboos, Japanese apricots, willows, paulownia trees, lotuses and plantains in the secured Madangs. 5. Gyeong Hwa Sa Jog(The scholars of the ruling class adapted to the 18th century's new historical aspect) of late Joseon Dynasty built the villas at the beautiful scenery closed to the their houses. 6. The Gardens around pavilions were located high closed to the mountain streams with nature like beautiful forests, oddly formed rocks, precipitous cliffs and viewing stones. The back side of the pavilion was enclosed by bamboo forests and the front had pines, ginkgoes and willows as shade trees. 7. The beautiful scenery which was preferred as the place for Ahoi was basically with fantastic peaks and precipitous cliffs which forms the distant view harmonized with a waterfall. Broad and flat rocks at the summit of a mountain which commands a bird's-eye view or on a mountain streamside with pine forest, willows and plum trees were chosen as the optimal places for Ahoi. 8. Pine trees were presumed to be more preferable than other species in the garden, especially an single planted old pine tree accented symbolism. 9. Portable tea braziers for boiling tea were adopted in all four types of the gardens. 10. The gardens mixed with auspicious landscape elements were the places of the arts for an unworldliness Ahoi through GeumGiSeoHwa(enjoying strings, go, writing and painting) and boiling tea.