• Wind and Structures
• /
• v.1 no.1
• /
• pp.43-57
• /
• 1998

A three-degree-of-freedom base hinged assembly (BHA) for aeroelastic model tests of tall building was developed. The integral parts of a BHA, which consists of two perpendicular plane frames and a flexural pivot, enable this modeling technique to independently simulate building translational and torsional degree-of-freedom. A program of wind tunnel aeroelastic model tests of the CAARC standard tall building was conducted with emphasis on the effect of (a) torsional motion, (b) cross-wind/torsional frequency ratio and (c) the presence of an eccentricity between center of mass and center of stiffness on wind-induced response characteristics. The experimental results highlight the significant effect of coupled translational-torsional motion and the effect of eccentricity between center of mass and center of stiffness on the resultant rms acceleration responses in both along-wind and cross-wind directions especially at operating reduced wind velocities close to a critical value of 10. In addition, it was sound that the vortex shedding process remains the main excitation mechanism in cross-wind direction even in case of tall buildings with coupled translational-torsional motion and with eccentricity.

• Journal of architectural history
• /
• v.31 no.5
• /
• pp.21-34
• /
• 2022

This study investigated the maintenance and management of government office building in Dongnaebu, Gyeongsangdo in the mid-19th century. In the late Joseon Dynasty, Dongraebu was an important point of national defense and a place of trade and diplomacy with Japan, so it had many government facilities. There are very few government facilities remaining today, and no structure remains. Therefore, it is possible to grasp information about the government facilities through the old materials. Currently, there are public documents related to the local government offices such as Eupji, Eupsarye, and Junggi. Through comparison between public documents, we will examine the maintenance and management of Dongnaebu government facilities in the mid-19th century. As a result of the research, Dongnaebu government facilities were supervised by department and managed like articles. In addition, the name, size, and changes were all recorded in the management of the goods, and the authority of responsibility was clearly stated. This result is because the remaining material has the purpose of preparation as an accounting book. As a result, it was found that the government facilities in the late Joseon Dynasty were managed by a systematic department with clear authority.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1122-1129
• /
• 2022

The concept of Digital Twin (DT) has been receiving an increasing amount of attention in the construction management and building engineering research domains. Although the benefits of DT are evident, confusion with regards to the concept of DTs and its relationship with others such as Cyber-Physical Systems (CPS), Building Information Modelling (BIM) and Internet of Things (IoT) remains. This paper aims to help allay this confusion through an in-depth analysis of the definition of DT and its unique characteristics. As such, a review of the past and current definitions of DT and CPS in various domains is performed. An analysis is then conducted to identify the overlaps between the definition of DT with CPS, as well as with BIM and IoT. Finally, given the relatively closer resemblances between DT and CPS, a set of four distinct dimensions enabling their comparative analysis and highlighting their shared and unique characteristics is discussed. This paper contributes to the existing literature by exploring the definition of DT and presenting two original conceptualizations that help further refine the concept of DT in the construction and management and building engineering domain.

• Earthquakes and Structures
• /
• v.23 no.2
• /
• pp.197-206
• /
• 2022

Recently, steel-timber hybrid buildings have become prevalent worldwide because several advantages of both steel and timber structures are maintained in the hybrid system. In Taiwan, seismic design specification related to steel-timber hybrid buildings remains void. In this study, the ductility capacity of steel-timber hybrid buildings in Taiwanese seismic design specification is first proposed and evaluated using nonlinear incremental dynamic analysis (IDA). Three non-linear structural models, 12-story, 8-story, and 6-story steel-timer hybrid buildings were constructed using OpenSees. In each model, Douglas-fir was adopted to assemble the upper 4 stories as a timber structure while a conventional steel moment-resisting frame was designated in the lower part of the model. FEMA P-695 methodology was employed to perform IDAs considering 44 earthquakes to assess if the ductility capacity of steel-timber hybrid building is appropriate. The analytical results indicate that the current ductility capacity of steel moment-resisting frames can be directly applied to steel-timber hybrid buildings if the drift ratio of each story under the seismic design force for buildings in Taiwan is less than 0.3%. As a result, engineers are able to design a steel-timber hybrid building straightforwardly by following current design specification. Otherwise, the ductility capacity of steel-timber hybrid buildings must be modified which depends on further studies in the future.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2022

Despite continuous efforts to reduce on-site safety accidents, the construction industry remains a high-risk sector with a high rate of fatal accidents. Design for Safety(DFS), which manages safety risk factors at the design stage, is being used as a method to lower the construction safety accident rate. However, due to limited knowledge, designers are unaware of the design-results risks during the different of the project lifecycle, including construction, operation, and maintenance. Effective DFS can be conducted if the designer understands the effect of the building shape on the safety accident rate and corresponding safety management cost(SMC). The cost of safety facilities such as fall prevention nets and safety fences will vary depending on the shape of the building. This study analyzes the outer perimeter length's impact on SMC. Following the data collection from 21 projects for this study, an analysis was conducted using the independent variables of the building perimeter(BP), building shape factor(BSF), and building area(BA), the dependent variable of SMC. The correlation R2 was found to be 0.876, 0.801 and 0.792 between the BP and SMC, BSF and SMC, BA and SMC, respectively, indicating that these factors were closely related.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.110-133
• /
• 2009

This study is on the types and characteristics of foundation and basestone which can be seen in remains of Baekje and Silla in beginning study of them in ancient Korean architecture. This is a close investigation that division of the shape of the basestone and the type of Jeoksim(積心, the supporting part under the basestone) and foundation under the ground. Also it can be seen that the difference of construction technique and the relation with each part. The research objects are the remains of temples which had been excavated or are been excavating now in Baekje area and in Silla from 6th to 8th century. Results of research published in north Korea are quoted for the remains in Goguryeo being unable to be seen as they are in north Korea. If it had been possible to visit the sites, the materials would have been collected from the direct investigation. Otherwise they are collected from the excavaion results published. After that the basestone and the foundation could be divided according to several types. Also each types can be compared and studied according to times and building use. The results are follows. There are some different characteristics between Baekje and Silla in the technique of foundation, jeoksim, and basestone. Through them it is possible that the arhitectural technique of Baekje had been introduced to not only wooden pagoda in the erection of hwangryongsa temple. These results are considered limited in a few remains grasped the characteristics so it should be complemented continuously as the outcome of excavation of architectural remains will be accumulated to.

• Journal of architectural history
• /
• v.20 no.5
• /
• pp.95-109
• /
• 2011

The building for the Sutra appeared as the Sutra-belief became popular in the early years of the Koryo Dynasty. According to the written documents, there were two types of apparatus to keep sutras, one by fixing the cabinet to the wall and the other by rotating the cabinet at the center of the hall. There are no remains. Recently, at the excavation of the site of the Yeongguk Temple (寧國寺) in the Chungcheong Prevince (영동군), a building which was presumed as the Sutra Hall was recovered at the side of the Main Hall. At the center of the building, of 6meters width and 6meters depth, there was a large stone which had a round trace which was presumed to supporting the rotating sutra-case cabinet. By examining the concerned situations, this building was concluded as the Sutra Hall of the temple. The Yeongguk Temple had a close relationship with the royal household. Budddhist monk Gwangji, son of the 16th King Yejong was lived at the Temple. the tomb of King's advisory priest Wongak was also erected at the Temple. Two monks were well known as the defender of the Sutra. The Sutra Hall of the Yeongguk Temple regarded as a significant example which showed us how the archtectural aspect of the Sutra Hall was shaped in the Koryo Dynasty. It could be said that revealing the architectural aspect of the Stura Hall will help revealing the Buddhist architecture of the Koryo Dynsty which is veiled in many field.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.137-155
• /
• 2005

This study was started with its consideration as materials showing original shapes of temple buildings in the late period of Chosun the photographs and drawings which contained in $\ulcorner$A Survey Report of Korean Architecture$\lrcorner$ made by Sekino Tadashi through his survey for 62 days(July 5${sim}$Sep. 4, 1902). Results of the study can be summarized as follows. During the period of Japanese occupation, Beomesa temple experienced frequent changes in building layout including the transfer and removal of buildings. Such frequent change began in spring, 1936 when a Buddhist monk of Beomeosa temple, Cha Woon Ho moved Gwaneumjeon, originally located to the light of the main building, to the left of the building and, on its original site, built up a 7-storied sarira tower. Though it is difficult to say that the study provides everything about Beomeosa temple, the researcher expects that the study would be the very basis on which changes in the building layout of the temple since the late period of Chosun can be researched. In conclusion, the researcher hopes that the above mentioned restoration plan would help originally restore or enlarge temples, further transmitting such restored or enlarged establishments as valuable cultural remains from generation to generation. In this respect, the researcher expects such restoration plan to be made in continuous and more detailed ways.

• Advances in concrete construction
• /
• v.14 no.1
• /
• pp.1-13
• /
• 2022

Due to the physical-chemical characteristics of some bottom ash (BA), there are technical, economic and environmental limitations to find a destination that will add value to it. In Brazil, this residue is eventually used for filling coal extraction pits or remains in sedimentation ponds, creating a susceptible panorama to environmental issues. The geopolymers binders are one of the alternatives to the proper use high amounts of these materials. In this work, geopolymeric binder pastes were produced with BA mixed to activators with different alkali contents (expressed as %Na₂O), as well as the incorporation of soluble silicates (Ms content). The production of binary geopolymeric pastes based on the use of two industrial wastes: fluid catalytic cracking (FCC) and aluminum anodizing sludge (AAS), was also assessed. The content in mass of BA/FCC and BA/AAS ranged from 100/0, 90/10; 80/20 and 70/30. Systems with soluble silicates as activator in a molar ratio SiO₂/Na₂O of 1.0 (Ms = 1.0) and Na₂O content of 15%, showed the best results of mechanical strength (42 MPa at day 28^th). The improvement is up to 5X when compared to NaOH based systems. For systems with partial replacement of BA of 10% of AAS and 20% of FCC (80/20), the presence of soluble silicates was also effective to increase compressive strength.

• Journal of architectural history
• /
• v.24 no.3
• /
• pp.17-29
• /
• 2015

This study is about the change of multi-storied buildings in Hanyang, the capital city of Joseon Dynasty. The changes are divided into 3 phases in the viewpoint of architectural types and building types. The first phase is from the early Joseon Dynasty to the time of Japanese invasion to Korea and Sungryemun remains until now. The second phase is from 1592 to the the first half of the 18th century. Many multi-storied Buddhist halls were rebuilt at that time. In the final phase, many multi-storied gate buildings and multi-storied main buildings of palaces were rebuilt. And there are differences between the Buddhist buildings and the main buildings of palaces. By the way the change that architectural style of the Buddhist buildings and the main buildings of pal were switched and mixed occurred. For example, Anguksa Daeungjeon adopted the style of multi-storied gates and Injeongjeon adopted the style of multi-storied Buddhist halls. These phenomenon was result from periodical situation the monk carpenter and his disciple took part in governmental construction like Janganmun.