• Progress in Medical Physics
• /
• v.29 no.2
• /
• pp.59-65
• /
• 2018

This paper describes the clinical use of the dose verification of multileaf collimator (MLC)-based CyberKnife plans by combining the Octavius 1000SRS detector and water-equivalent RW3 slab phantom. The slab phantom consists of 14 plates, each with a thickness of 10 mm. One plate was modified to support tracking by inserting 14 custom-made fiducials on surface holes positioned at the outer region of $10{\times}10cm^2$. The fiducial-inserted plate was placed on the 1000SRS detector and three plates were additionally stacked up to build the reference depth. Below the detector, 10 plates were placed to avoid longer delivery times caused by proximity detection program alerts. The cross-calibration factor prior to phantom delivery was obtained by performing with 200 monitor units (MU) on the field size of $95{\times}92.5mm^2$. After irradiation, the measured dose distribution of the coronal plane was compared with the dose distribution calculated by the MultiPlan treatment planning system. The results were assessed by comparing the absolute dose at the center point of 1000SRS and the 3-D Gamma (${\gamma}$) index using 220 patient-specific quality assurance (QA). The discrepancy between measured and calculated doses at the center point of 1000SRS detector ranged from -3.9% to 8.2%. In the dosimetric comparison using 3-D ${\gamma}$-function (3%/3 mm criteria), the mean passing rates with ${\gamma}$-parameter ${\leq}1$ were $97.4%{\pm}2.4%$. The combination of the 1000SRS detector and RW3 slab phantom can be utilized for dosimetry validation of patient-specific QA in the CyberKnife MLC system, which made it possible to measure absolute dose distributions regardless of tracking mode.

• Archives of design research
• /
• v.15 no.1
• /
• pp.59-67
• /
• 2002

In accordance with the fast changing circumstance, universities are now reaching, beyond the education place of simple delivery of knowledge and exchange of information, to a place of developing a specialty program related with the region and industry to achieve a competitive edge in education. Through these academic-industrial collaboration program, special knowledge and human resources in the university are utilized in the society and it may contribute to the development of industry and breed of career people based upon the real job site can be achieved. In addition, through the practical operation of such developed program, university may contribute to the enhancement of the competitiveness of the corporation to the activation and acceleration of the regional economy and finally to the enhancement of competitiveness of national industry in international level. This study tries to develop 3 technical instruction and support program related with the legion and industry which may conform to the ideals of university and its goal of education and can provide a platform for the education that is closely related with the regional industry and real job site iud may cope actively with the upcoming knowledge society and fast changing regional circumstances. This study will make research and analyze needs of design support from the industry in order to develop a academic-industrial cooperative design support program for the furniture industry which conforms to the regional characteristic and feature and develop and present contents of program in three area of development of furniture design technology, build-up of furniture design information system and establishment of order based education system. The proposed program is supposed to be operated practically and effectively and contribute to the development of new product, to enhancement of company image and finally to the maximization of corporate profit. Also this study is epected to be used as an important material for establishment of order-based education system which confirms to the job site needs that may be analysed from feedback of product results and for practical learning.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.239-270
• /
• 2010

This thesis is to make an appropriate national defense policy of Republic of Korea through studying the Hegemony Strategy of United States. I searched the theory of hegemony. The hegemony was differently defined by the point of time and region. The strong power nations with the hegemony have been making efforts to maintain their hegemony everytime. I have conclusion that the presence of hegemony once emerged, it brought regional stability in place whether it is coercive or beneficial. The stability and instability of international order IS not exclusively dependent on hegemony. Even if the safety of hegemony cannot guarantee absolute stability of international order, there IS on doubt that the hegemony has enormous impact on that. According to the hegemonic theory, the history of mankind equals to the history of rising and falling hegemony. The international order was changed as the hegemony changes. The United States has been making efforts to maintain her global hegemony during the post cold-war era as well. Taking all these into consideration, relevant military strategy direction able to pursue national interest is that to make up for the relative weakness in the strategic environment. South Korea have to prepare security policy response as following. First, South Korea should build the military force equipped with advanced weapons in military technology sector and solidify military diplomatic relation able to form cooperative relation in wartime. Second, South Korea should make solid Alliance of Korea and U.S. Third, develop and maintain multilateral security cooperation of East Asia. Forth, we could realize that there are means that can neutralize opponent's strong point by seeking one or two and more asymmetry in the aspect of strategy, tactics, and means through asymmetric strategy. Than the military force of South Korea should develop into a force that is able to overcome to the traditional North Korea's threat and new type of conflicts. And the force should have sufficient strength and be deployed to effectively defend the Korean Peninsula. So, we need to establish a denial and defense system against any hostile neighboring country. Therefore, ROK military forces preparing for the future should try to construct a future military power to gradually establish enough strength for self-defense to prepare for a uncertain security environment and when the Korean Peninsula is unified in a future.

• The Southeast Asian review
• /
• v.28 no.2
• /
• pp.181-212
• /
• 2018

In 2017, the government of Duterte, in the second year of the ruling, more strongly promoted peace and order policies and expressed independent diplomacy as the chairman of ASEAN. He continued to fight against drugs and tried to increase his political legitimacy through the punishment for corrupt officials. He also declared martial law in the Mindanao region because of the dissolution of the Maute group, a Muslim terrorist organization, and strengthened counterterrorism cooperation externally. In addition, as to Communist militants, he took the initial reconciliation gesture and promoted peace negotiations, however, concluded the peace tide and started the suppression operation due to a series of bloodshed. He still has a strong drive in peace and order issues, backed up by high support rate, but it is becoming a factor of anxiety as the socioeconomically underprivileged and minority groups are increasingly alienated. As the chairman of ASEAN, Duterte has a certain distance from the United States, which is a firm ally, but has turned to increase familiarity with China and Russia, which can take substantial economic benefits. Through diversifying the external economic support and increase of tax revenue, the priority task was to establish the infrastructure. Although the Philippines, which has a high economic growth rate, has a strong expectation that it can establish a solid infrastructure, tax reforms should be successfully completed in order not to repeat the previous failures, which has traditionally increased foreign debt burden by relying on external resources. It seems that it is necessary to find the meeting point of the foreign policy of Duterte and new Korean government's New Southern Policy, and to find possible economic cooperation policies to improve Philippine infrastructure.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.64-75
• /
• 2021

On the moon as well as the earth, one of the easiest ways to understand geological formation history of any region is to observe the stratigraphy if it is available, the order in which the strata build up. By analyzing stratigraphy, it is possible to infer what geological events have occurred in the past. Mare Nubium also has an unique normal fault called Rupes Recta that shows stratigraphy. However, a rover moving with wheels is incompetent to explore the cliff since the Rupes Recta has an inclination of 10° - 30°. Therefore, a quadruped walking robot must be employed for stable expedition. To exploration a fault with a four-legged walking robot, it is necessary to design an expedition route by taking account of whether the stratigraphy is well displayed, whether the slope of the terrain is moderate, and whether there are obstacles and rough texture in the terrain based on the remote sensing data from the previous lunar missions. For the payloads required for fault surface exploration we propose an optical camera to grasp the actual appearance, a spectrometer to analyze the composition, and a drill to obtain samples that are not exposed outward.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.4
• /
• pp.5-28
• /
• 2022

In this study, LD construction cases of overseas libraries were analyzed with focus on published datasets, reused vocabulary, and interlinked external datasets, and based on the analysis results, basic data on LD construction plans of domestic libraries were obtained. As a result of the analysis of 21 library cases, overseas libraries have established a faithful authority LD and conducted new services using published LDs. To this end, overseas libraries collaborated with other libraries and cultural institutions within the region, within the country, and nationally under the leadership of the library, and based on this cooperation, a specialized dataset was published. Overseas libraries used Schema.org to increase the visibility of published LDs, and used BIBFRAME for subdivision of description to define various entities and build LDs based on the defined entities. Overseas libraries have utilized various defined entities to link related information, display results, browse, and download in bulk. Overseas libraries were interested in the continuous up-to-date of interlinked external datasets, and directly utilized external data to reinforce catalog information. In this study, based on the derived implications, points to be considered when issuing LDs by domestic libraries were proposed. The research results can be used as basic data when future domestic libraries plan LD services or upgrade existing services.

• Strategy21
• /
• s.32
• /
• pp.192-221
• /
• 2013

In order to deal with the current economic crisis, the U.S. government, as a part of its austerity fiscal policy, implemented a budget sequester. The sequester will hit the U.S. defense budget the hardest, and as a result will most likely put the security of the international community in jeopardy. The U.S. will have to cut 46 billion dollars from its original 525 billon defense spending in 2013. And by the year 2022, will have to cut 486.9 billion dollars. Such an astronomical decrease in the U.S. defense spending will inevitably burden the friendly nations. According to recent studies, pirate related incidents in Somalia, where piracy is most active, has declined from its 226 incidents to 76 incidents per year in 2012, a 66% drop from previous years'. However, piracy threats as well as those related to firearms still remain and thus participants of anti-piracy operations, namely the U.S., U.K., France, Canada, NCC, EUNAVFOR, and NATO, are facing a problem of declining forces. Considering the current situation as well as rising expectations from the international community, Republic of Korea, a supporter of NCC's maritime security operation, not to mention its foremost duty of securing its sea, is at a stage to re-examine its operational picture. Such action will be a good opportunity for Republic of Korea to build the trust and live up to the international community's expectation. To quote from the network theory, although in relation to other friendly nations participating in the anti-piracy operation, Republic of Korea currently remains at a single cell level, this opportunity will certainly develop Korea to a 'node' nation in which power and information would flow into. Through this expansion of operational capability, Republic of Korea will be able to exert more influence as a more developed nation. Currently however, not only is the single 4,500 ton class destroyer deployed in Somalia a limited unit to further expand the scale and amount of force projection in the area, but also the total of six 4,500 ton class destroyers ROK feet possess is at a high fatigue degree due to standard patrolling operations, midshipman cruise and the RIMPAC exercise. ROK fleet therefore must consider expanding the number of ships deployed along with either deploying combat support ships or constructing logistics support site in the African region. Thus, by expanding its operational capabilities and furthermore by abiding to the rightful responsibilities of a middle power nation, Republic of Korea will surely earn its respect among the members of the international community.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.158-170
• /
• 2013

With the recent 'Creative economy' and 'Cultural prosperity' coming to the fore as a new code to build up a city or a region, it is necessary to focus on strengthening the regional creative capacity as well as developing spontaneous regional culture. In such trend this research aims to explore the Kyunglidan-gil, Seoul, Korea in which creative-class are appearing autogenously in clusters and forming new cultural landscape, to identify the factors of their accumulation and changing aspect of cultural landscape. This study has the following purposes: First, Investigating the historical context of the Kyunglidan-gil's landscape. Second, considering the process of the creative-class being flowed into the Kyunglidan-gil as the subject leading to the modification of the region. Third, their activity was analyzed to consider the unique aspect of forming the cultural landscape at the Kyunglidan-gil. Regarding why the creative-class should flow in, results of the study drew five factors including region in issue compared to inexpensive rents, coexistence with nature, quiet atmosphere seeming isolated from the urban confusion, location possible to test and share individual materials one likes, and a site with synergy effect of activity through the network with acquaintances. Also, five characteristics of cultural landscape forming by the people's activity were drawn - space of communication for increasing creativity, temporary and flexible spatial use, expression of one's identity and taste, distinguishing, and positive use of the existing facilities. Like this, by exposing the 'creative-class', a subject of the leader in changing process of the Kyunglidan-gil, this research identified the aspect of forming cultural landscape.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.1-25
• /
• 2020

In this paper, we suggest an application system architecture which provides accurate, fast and efficient automatic gasometer reading function. The system captures gasometer image using mobile device camera, transmits the image to a cloud server on top of private LTE network, and analyzes the image to extract character information of device ID and gas usage amount by selective optical character recognition based on deep learning technology. In general, there are many types of character in an image and optical character recognition technology extracts all character information in an image. But some applications need to ignore non-of-interest types of character and only have to focus on some specific types of characters. For an example of the application, automatic gasometer reading system only need to extract device ID and gas usage amount character information from gasometer images to send bill to users. Non-of-interest character strings, such as device type, manufacturer, manufacturing date, specification and etc., are not valuable information to the application. Thus, the application have to analyze point of interest region and specific types of characters to extract valuable information only. We adopted CNN (Convolutional Neural Network) based object detection and CRNN (Convolutional Recurrent Neural Network) technology for selective optical character recognition which only analyze point of interest region for selective character information extraction. We build up 3 neural networks for the application system. The first is a convolutional neural network which detects point of interest region of gas usage amount and device ID information character strings, the second is another convolutional neural network which transforms spatial information of point of interest region to spatial sequential feature vectors, and the third is bi-directional long short term memory network which converts spatial sequential information to character strings using time-series analysis mapping from feature vectors to character strings. In this research, point of interest character strings are device ID and gas usage amount. Device ID consists of 12 arabic character strings and gas usage amount consists of 4 ~ 5 arabic character strings. All system components are implemented in Amazon Web Service Cloud with Intel Zeon E5-2686 v4 CPU and NVidia TESLA V100 GPU. The system architecture adopts master-lave processing structure for efficient and fast parallel processing coping with about 700,000 requests per day. Mobile device captures gasometer image and transmits to master process in AWS cloud. Master process runs on Intel Zeon CPU and pushes reading request from mobile device to an input queue with FIFO (First In First Out) structure. Slave process consists of 3 types of deep neural networks which conduct character recognition process and runs on NVidia GPU module. Slave process is always polling the input queue to get recognition request. If there are some requests from master process in the input queue, slave process converts the image in the input queue to device ID character string, gas usage amount character string and position information of the strings, returns the information to output queue, and switch to idle mode to poll the input queue. Master process gets final information form the output queue and delivers the information to the mobile device. We used total 27,120 gasometer images for training, validation and testing of 3 types of deep neural network. 22,985 images were used for training and validation, 4,135 images were used for testing. We randomly splitted 22,985 images with 8:2 ratio for training and validation respectively for each training epoch. 4,135 test image were categorized into 5 types (Normal, noise, reflex, scale and slant). Normal data is clean image data, noise means image with noise signal, relfex means image with light reflection in gasometer region, scale means images with small object size due to long-distance capturing and slant means images which is not horizontally flat. Final character string recognition accuracies for device ID and gas usage amount of normal data are 0.960 and 0.864 respectively.

• Radiation Oncology Journal
• /
• v.12 no.2
• /
• pp.225-232
• /
• 1994

Purpose : This study was to obtain the basic dosimetric data using the 10 MV X-ray for the total body irradiation. Materials and Methods : A linear accelerator photon beam is planned to be used as a radiation source for total body irradiation (TBI) in Chonnam University Hospital. The planned distance from the target to the midplane of a patient is 360cm and the maximum geometric field size is 144cm x 144cm. Polystyrene phantom sized $30{\times}30{\times}30.2cm^3$ and consisted of several sheets with various thickness, and a parallel plate ionization chamber were used to measure surface dose and percent depth dose (PDD) at 345cm SSD, and dose profiles. To evaluate whether a beam modifier is necessary for TBI, dosimetry in build up region was made first with no modifier and next with an 1cm thick acryl plate 20cm far from the polystyrene phantom surface. For a fixed sourec-chamber distance, output factors were measured for various depth. Results : As any beam modifier was not on the way of radiation of 10MV X-ray, the $d_{max}$ and surface dose was 1.8cm and $61\%$, respectively, for 345cm SSD. When an 1cm thick acryl plate was put 20cm far from polystyrene phantom for the SSD, the $d_{max}$ and surface dose were 0.8cm and $94\%$, respectively. With acryl as a beam spoiler, the PDD at 10cm depth was $78.4\%$ and exit dose was a little higher than expected dose at interface of exit surface. For two-opposing fields for a 30cm phantom thick phantom, the surface dose and maximum dose relative to mid-depth dose in our experiments were $102.5\%$ and $106.3\%$, respectively. The off-axis distance of that point of $95\%$ of beam axis dose were 70cm on principal axis and 80cm on diagonal axis. Conclusion: 1. To increase surface dose for TBI by 10MV X-ray at 360cm SAD, 1cm thick acrylic spoiler was sufficient when distance from phantom surface to spoiler was 20cm. 2. At 345cm SSD, 10MV X-ray beam of full field produced a satisfiable dose uniformity for TBI within $7\%$ in the phantom of 30cm thickness by two-opposing irradiation technique. 3. The uniform dose distribution region was 67cm on principal axis of the beam and 80cm on diagonal axis from beam axis. 4. The output factors at mid-point of various thickness revealed linear relation with depth, and it could be applicable to practical TBI.