• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3132-3143
• /
• 1996

In the evaluation of Broadband-ISDN, the main issue is to interconnect existing LANs and MANs to B-ISDN based on Asynchrous Transfer Mode. However, LANs provide connectionless services, whereas the ATM network provides connection-oriented services. So some problem arises from accessing ATM switchs to transparently transmit connectionless data via B-ISDN. Two methods then were recommended by ITU-TS to support the connectionaless services. In the paper, we do the numerical analysis, using the stochastic fluid flow method, of dynamic bandwidth allocation sheme with two class traffics in the virtual path established between Interworking Units(JWUS) interconnecting LANs to an ATM network and Connectionless Servers(CLSs). The loss mechanism of each traffic is controlled by the contents of buffer. The vandwidth which the IWU requests the CLS is estimated by the number of On-Off sources in the On state. We use the stochsastic fluide flow method which is to find the steady-state joint probability in each level of the IWU buffer. The length of the IWU buffer as the real random variable is changed by traffics entering the IWU.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.550-555
• /
• 2005

In this research, safety requirements for guard rail, buffer stop, car stop scotch block, protection device, fire protection facilities, safety siding, escape facilities and inundation protection facilities are studied to establish a standard. First, various kinds of guard rails and their construction methods are investigated. Researches on the level difference of main track and guard rail, joint, length, and fastening force of guard rail are done. Second, the classification of buffer stop and car stop scotch block and its characteristics are examined, and the impact force, speed limit and capacity of buffer stop are summarized. Details of protection device, fire protection facilities, safety siding, escape facilities and inundation protection facilities are also investigated. From this fundamental research results, basic data on the safety facilities of railroad system are established.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.53-63
• /
• 1997

In this paper, we present a new macroblock-based bit allocation scheme in multiple MPEG-1 video encoders system and a single multiplexer over a single channel. The proposed scheme models the relations between fate(Bits/MB) and distortion(MSE/MB), rate and quantizer parameter(QP), distortion and quantizer parameter, respectively, in the same form. By using these relations, we minimize the Larangian cost function to obtain a bit allocation scheme based on macroblock unit. Experimental results show that the proposed scheme can reduce MSE compared to other conventional buffer-based rate control methods, i.e. independent buffer control method and shared common buffer control one. And we confirmed, through computer simulation, that the proposed scheme can be effectively modified to maintain the objective quality of a specific video service at a constant level.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.175-175
• /
• 1993

Streptozotocin, which is a naturally occurring nitrosoamide used extensively to produce diabetes mellitus in experimental animals, has been known to be chemically stable only under acidic condition (pH 4). The present study was conducted to determine whether its degradation products formed under various conditions can induce hyperglycemia in female rats. Streptozotocin in phosphate buffer saline (pH 7.4) resulted in spontaneous degradation rapidly. Furthermore, streptozotocin incubated with plasma isolated from rats was degraded even faster than those in neutral buffer. When streptozotocin was administered iv to rats, significant elevations in blood glucose level were observed within 24 hours. However, rats treated with equimolar concentration of streptozotocin degradation products under the phosphate buffer saline as well as the plasma did not lead to hyperglycemia. These results suggest that, when streptozotocin administered undergo spontaneous breakdown in vivo, its degradation Products do not induce the hyperglycemia in rats.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.491-495
• /
• 2017

We investigated solution-processed indium-zinc oxide (IZO) thin-film transistors (TFTs) by inserting a 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) buffer layer. This buffer layer efficiently tuned the energy level between the semiconducting oxide channel and metal electrode by increasing charge extraction, thereby enhancing the overall device performance: the IZO TFT with embedded PBD layer (thickness: 5 nm; width: $2,000{\mu}m$; length: $200{\mu}m$) exhibited a field-effect mobility of $1.31cm^2V^{-1}s^{-1}$, threshold voltage of 0.12 V, subthreshold swing of $0.87V\;decade^{-1}$, and on/off current ratio of $9.28{\times}10^5$.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.1041-1048
• /
• 2021

An engineered barrier system (EBS) for the disposal of high-level radioactive waste (HLW) is composed of a disposal canister with spent fuel, a buffer material, a gap-filling material, and a backfill material. As the buffer is located in the empty space between the disposal canisters and the surrounding rock mass, it prevents the inflow of groundwater and retards the spill of radionuclides from the disposal canister. Due to the fact that the buffer gradually becomes saturated over a long time period, it is especially important to investigate its thermal-hydro-mechanical-chemical (THMC) properties considering variations of saturated condition. Therefore, this paper suggests a new method of measuring thermal conductivity and water suction for single compacted bentonite at various levels of saturation. This paper also highlights a convenient method of saturating compacted bentonite. The proposed method was verified with a previous method by comparing thermal conductivity and water suction with respect to water content. The relative error between the thermal conductivity and water suction values obtained through the proposed method and the previous method was determined as within 5% for compacted bentonite with a given water content.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1495-1506
• /
• 2023

For the safe disposal of high-level radioactive waste using Engineered Barrier Systems (EBS), bentonite buffer is used by its high swelling capability and low hydraulic conductivity. When the bentonite buffer is contacted to heated pore water containing ions by radioactive decay, chemical alterations of minerals such as illitization reaction occur. Illitization of bentonite indicates the alteration of expandable smectite into non-expandable illite, which threatens the stability and integrity of EBS. This study intends to provide a thorough review on the information underlying in the illitization of bentonite, by covering basic clay mineralogy, smectite expansion, mechanisms and observation of illitization, and illitization in EBS. Since understanding of smectite illitization is crucial for securing the safety and integrity of nuclear waste disposal systems using bentonite buffer, this thorough review study is expected to provide essential and concise information for the preventive EBS design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1406-1424
• /
• 2017

Recent advancements in network infrastructures provide increased opportunities to support data delivery over multiple paths. Compared with multi-homing scenario, overlay network is regarded as an effective way to construct multiple paths between end devices without any change on the underlying network. Exploiting multipath characteristics has been explored for TCP with multi-homing device, but the corresponding exploration with overlay network has not been studied in detail yet. Motivated by improving quality of experience (QoE) for reliable data delivery, we propose a multipath message transport protocol based on application level relay (MPMTP-AR). MPMTP-AR proposes mechanisms and algorithms to support basic operations of multipath transmission. Dynamic feedback provides a foundation to distribute reasonable load to each path. Common source decrease (CSD) takes the load weight of the path with congestion into consideration to adjust congestion window. MPMTP-AR uses two-level sending buffer to ensure independence between paths and utilizes two-level receiving buffer to improve queuing performance. Finally, the MPMTP-AR is implemented on the Linux platform and evaluated by comprehensive experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.29-40
• /
• 2004

In this paper, we propose a new early congestion detection and notification technique called QR-AQM. Unlike RED and it's variation, QR-AQM measures the total traffic rate from TCP sessions, predicts future network congestion, and determine the packet marking probability based on the measured traffic rate. By incorporating the traffic rate in the decision process of the packet marking probability, QR-AQM is capable of foreseeing future network congestion as well as terminating congestion resolution procedure in much more timely fashion than RED. As a result, simulation results show that QR-AQM maintains the buffer level within a fairly narrow range around a target buffer level that may be selected arbitrarily as a control parameter. Consequently, compared to RED and its variations, QR-AQM is expected to significantly reduce the jitter and delay variance of packets traveling through the buffer while achieving nearly identical link utilization.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.57-64
• /
• 2021

The domestic semiconductor industry can produce various products that will satisfy customer needs by diversifying assembly parts and increasing compatibility between them. It is necessary to improve the production line as a method to reduce the work-in-process inventory (WIP) in the assembly line, the idle time of the worker, and the idle time of the process. The improvement of the production line is to balance the capabilities of each process as a whole, and to determine the timing of product input or the order of the work process so that the time required between each process is balanced. The purpose of this study is to find the optimal WIP and buffer size through SA (Simulated Annealing) that minimizes lead time while matching the number of two parts in a parallel assembly line with bottleneck process. The WIP level and buffer size obtained by the SA algorithm were applied to the CONWIP and DBR systems, which are the existing production systems, and the simulation was performed by applying them to the new hybrid production system. Here, the Hybrid method is a combination of CONWIP and DBR methods, and it is a production system created by setting new rules. As a result of the Simulation, the result values were derived based on three criteria: lead time, production volume, and work-in-process inventory. Finally, the effect of the hybrid production method was verified through comparative analysis of the result values.