Methylsulfate 음이온을 갖는 이미다졸리움계 이온성 액체들을 대상으로 이온성 액체에 녹는 이산화탄소의 용해도를 측정하고, 이온성 액체가 가지고 있는 양이온의 변화에 따른 용해도의 차이를 비교하였다. 본 연구에서 사용한 methylsulfate 음이온을 가진 이온성 액체는 1-ethyl-3-methylimidazolium methylsulfate ([emim][$mSO_4$])와 1-butyl-3-methylimidazolium methylsulfate ([bmim][$mSO_4$])였다. 가변부피투시창(variable-volume view cell)이 장착된 고압용 상평형 장치를 사용하여 303.15 K에서 343.15 K까지 온도를 변화시키면서 여러 가지 조성을 갖는 이온성 액체와 이산화탄소의 혼합물의 기포점 압력을 측정함으로써 이온성 액체에서의 고압 이산화탄소의 용해도를 측정하였다. 이온성 액체에서 이산화탄소의 농도가 증가함에 따라 압력이 급격히 증가하였으며, 온도가 증가함에 따라 용해도는 감소하였다. 또한 이미다졸리움 양이온에 붙어 있는 알킬 체인의 길이가 길수록 높은 용해도를 가지는 것으로 나타났다. Peng-Robinson 상태방정식을 사용하여 이온성 액체와 이산화탄소 혼합물 시스템에 대한 상평형 모델링을 수행하였다.
본 연구에서는 고분자전해질 연료전지의 연료가습을 위하여 막 증발법을 적용한 막가습기를 제작하여 특징과 성능을 알아보았다. 막가습기 내부 물의 온도를 $30{\sim}60^{\circ}C$, 연료기체의 유속을 300~3,000 mL/min, 막 가닥수를 10, 50, 100 가닥으로 변화 하였을 때 결과를 dew point로 나타내었다. 그 결과 $60^{\circ}C$일 때 $51.19^{\circ}C$, 900 mL/min일 때 $54.22^{\circ}C$, 100 가닥일 때 $60.03^{\circ}C$로 연료 가습성능이 가장 좋았다. 특히, 막 가습기 물질 전달식의 모델링을 통해 연료전지에 적용할 때 막 가습기 공경 크기에 따른 반응기체의 가습량을 예측하는 것이 가능하였다. 100 W급 스택에 적용하였을 때, 전압과 출력값이 변화되지 않고 안정적으로 작동하였으며 제작한 막 가습기는 기존 기포가습기보다 부피는 훨씬 작으면서도 가습 성능은 우수한 것을 알 수 있었다.
International Journal of Fluid Machinery and Systems
/
제4권1호
/
pp.179-190
/
2011
The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The influence of outlet bubble cavitation and air injection is also investigated for low cavitation number. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and the associated pressure fluctuations is analyzed by varying the rotational speed.
최근 다양한 공공데이터가 개방되고 있으며, 적절한 데이터 마이닝과 시각화 알고리즘을 통해 일반 시민에게 서비스 되고 있다. 이를 통해 정부와 지방자치단체는 공공 정책의 투명성과 효율성을 널리 알릴 수 있을 뿐 아니라, 일반 사용자들이 개방된 공공데이터를 재가공하여 서비스함으로써 관련 산업의 성장을 이끌고 있다. 공공데이터의 최종 사용자는 일반 시민이기 때문에, 누구나 손쉽게 이해할 수 있도록 공공데이터를 적절히 시각화하는 것이 무엇보다 중요하다. 본 연구에서는 공공데이터 비주얼라이제이션의 중요성을 널리 알리기 위해, 일반 국민이 관심을 가질만한 공공데이터로 UN 회원국의 투표 데이터를 고려한다. 외교와 교육 목적으로 그 활용 가치가 높고 데이터를 쉽게 얻을 수 있는 장점이 있다. 또한 적절한 데이터 마이닝과 시각화 과정을 거친다면, 일반 사용자들이 유엔 회원국 간의 투표 성향에 대한 통찰력을 쉽게 얻을 수 있다. 유엔 투표 데이터를 시각화하기 위해서는, 회원국 간의 투표성향 유사도를 측정하고, 이를 바탕으로 소셜 그래프를 구현한다. 그리고 그래프 레이아웃 알고리즘을 적용하여 그래프를 화면에 렌더링 하게 된다. 기존 방법을 이용하여 소셜 그래프를 비주얼라이제이션 할 경우에 그래프의 복잡도가 증가하여 유엔 회원국 간의 투표성향을 파악하는데 큰 어려움이 있다. 이러한 문제를 개선하기 위해, 본 논문에서는 친구 매칭(Friend-Matching), 친구-라이벌 매칭(Friend-Rival Matching), 버블힙(Bubble Heap) 알고리즘들을 차례로 제안한 다. 제안된 알고리즘을 바탕으로, 기존 그래프 비주얼라이제이션을 개선하여 일반 사용자들이 손쉽게 유엔 회원국 간의 투표성향과 관련된 특정 패턴이나 통찰력을 얻는데 큰 도움을 줄 것이다. 또한 웹에서 동작하는 프로토타입을 구현하여, 누구나 방문하여 테스트를 할 수 있다. 웹 페이지 주소: http://datalab.kunsan.ac.kr/politiz/un/
In the process of continuous hot-dip galvanizing, it is well known that the gas wiping through an air knife system is most effective because of its uniformity in coating thickness, possibility of thin coating, workability in high speed, and simplicity of control. However, gas wiping used in the galvanizing process brings about a problem of splashing at the strip edge above a certain high speed of process. It is also known that the problem of edge splashing is more harmful than that at the mid strip surface. For a given liquid(of a certain viscosity and surface tension), the onset of splashing mainly depends upon the strip velocity, the gas-jet pressure, and the nozzle's stand-off distance. In these connections in the present study, we proposed three kinds of air knife system having nozzles of constant expansion rate, and compared the jet structures issuing from newly proposed nozzle systems with the result by a conventional one. In numerical analysis, the governing equations are consisted of two-dimensional time dependent Navier-Stokes equations, and the standard k-${\varepsilon}$ turbulence model is employed to solve turbulence stress and so on. As the result, it is found that we had better use the constant expansion-rate nozzle which can be interpreted from the point view of the energy saving for the same coating thickness. Also, we better reduce the size of separation bubble and enhance the cutting ability at the strip surface, by using an air-knife having constant expansion-rate nozzle.
Effect of boundary layer thickness on the flow characteristics around a rectangular prism has been investigated by using a PIV(Particle Image Velocimetry) technique. Three different boundary layers(thick, medium and thin)were generated in the Atmospheric Boundary Layer Wind Tunnel at Pusan National University. The thick boundary layer having 670 mm thickness was generated by using spires and roughness elements. The medium thickness of boundary layer($\delta$=270 mm) was the natural turbulent boundary layer at the test section floor with fairly long developing length(18 m). The thin boundary layer($\delta$=36.5 mm) was generated on the smooth panel elevated 70cm from the wind tunnel floor. The Reynolds number based on the free stream velocity(3 ㎧) and the height of the model(40 mm) was 7.9$\times$10$^3$. The mean velocity vector fields and turbulent kinetic energy distributions were measured and compared. The effect of boundary layer thickness was clearly observed not only in the length of separation bubble but also in the location of reattachment point. The thinner the boundary layer thickness, the higher the turbulent kinetic energy Peak around the model roofbecame. It is strongly recommended that the height ratio between the model and the approaching boundary layer thickness should be encountered as a major parameter.
본 연구에서는 기존 유속계에 의한 측정이 어려운 점을 감안하여 나프탈렌 승 화법을 이용하여 열교환기 시스템의 한 모델인 원봉에 유한한 길이의 환상핀이 부착된 경우 환상핀과 원봉이 만나는 부분에서 와류들 특히 V2, V3등 구석와류가 물질전달을 증가시키는 구조에 대해 고찰한다. 이는 원봉 주위의 환상핀에 의한 대류 물질전달 에 영향을 줄수 있는 레이놀즈수, 환상핀의 크기에 따른 형상비, 그리고 경계층 두께, 배제 두께 등의 유동변수를 변화시켜 가며 물질전달률과의 관계를 규명하여 열교환기 설계의 기본자료를 제공한다. 또한 환상핀 사이의 원봉표면에 대한 전체물질전달률 을 측정하며, 환상핀에 인접한 곳에서 구석와류에 대한 환상핀의 끝 벽면 영향을 알아 보고 이를 근거로 하여 말굽와류의 3차원 박리 유동구조를 정성적으로 규명하고자 한 다.
기존의 CFC 계열 및 HCFC 계열 냉매들이 오존층 붕괴와 지구온난화의 원인들 중의 한가지로 밝혀지면서 이것을 대체할 수 있는 냉매의 개발은 주요한 연구과제였다. 이제 몇 가지 대체 냉매들이 개발되면서 이것들 이 냉동시스템에 사용될 때 발생하는 상용성 (Compatibility)이 연구될 필요가 있다. 본 연구에서는 대체냉매의 상용성 연구의 일환으로 1,1,1,2-Tetrafluoroethane(HFC-134a) +1,1,1-Trifluoroetane(HFC-143a) + Pentafluoroethane (HFC-125)의 혼합대체냉매 HFC-404a 와 냉매 윤활유의 하나인 POE 오일 혼합물의 증기압을 측정하였다. 측정온도범위는 냉매 시스템의 운전온도를 고려하여, 263.15K 에서 323.15 K로 하였으며 오일농도범위는 0 mass% 에서 90 mass% 까지로 하였다. 측정결과 273.15K 이하의 온도에서 오일 농도 30 mass%까지 증기압에 대한 오일의 영향은 미미하였으며 50 mass% 이상에서는 증기압이 급격히 떨어지는 것이 밝혀졌다. 측정자료를 이용하여 HFC-404a와 POE 오일 혼합물의 증기압을 예측할 수 있는 모형을 개발 하기 위하여 Rault 모델과 Flory-Huggins 모델을 사용하여 측정치와 비교하였다. 그리고 보다 정확하고 실용적으로 증기압을 예측할 수 있는 경험식을 도출하였다.
본 연구는 2002년부터 2012년까지의 우리나라 벤처창업정책이 어떤 기조로 변화해왔는지를 살펴보고 그 성과와 한계점을 고찰하고 과제를 제언하는데 초점을 두었다. 우리나라 정부의 벤처창업 정책은 1997년에 제정된 "벤처기업 육성에 관한 특별조치법"을 계기로 시작되어 2002년부터 2004년까지는 벤처기업 옥석 가리기 등 벤처산업 건전화 정책이 주요 기조를 이루었고, 2005년부터 2006년까지는 벤처캐피탈의 역량과 투명성을 제고하는 벤처창업정책이 주요 기조였다. 그리고 2007년부터 2012년까지 기술창업활성화와 청년창업활성화의 정책 기조를 띠었다. 2002년부터 2012년까지의 한국 벤처창업정책은 IT를 중심으로 한 벤처기업의 내실 있는 성장을 촉진하는데 주안점을 두었으며, 혁신형 중소기업 육성, 1인 창조기업 지원 등 벤처창업의 하드웨어적인 인프라를 구축하고 자금을 지원하는데 역점을 두었다고 평가할 수 있다.
본 연구는 벤츄리 시스템을 미세기포 생성을 위한 공기공급 장치로 개발하는데 그 목표를 두고 수행하였다. 이를 위해 상용유동해석 프로그램인 ANSYS CFX-15를 사용한 전산 유동해석을 통해 기하학적 형상변화가 벤츄리 관 내 유동특성들에 미치는 영향을 규명하였다 그리고 공급공기를 공급하는 공기 공급관의 위치, 크기, 개수 등을 변수로 2-유체 유동 해석을 수행하여 이들 설계 값들이 공기 공급 특성에 미치는 효과를 규명하였다. 최종적으로 직경 비 ${\beta}=0.75$의 벤츄리 확대관이 시작되는 위치에 공기 공급 구멍을 설치할 경우 가장 많은 공기가 벤츄리 관으로 유입되는 것을 확인할 수 있었으며, 유입공기 공급구멍 개수 및 직경과 벤츄리 관 내 공급되는 공기량 사이에는 선형적인 관계가 성립됨을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.