• Computational Structural Engineering
• /
• v.4 no.2
• /
• pp.119-129
• /
• 1991

This study is directed for the development of an efficient Importance Sampling Technique for system reliability analysis of bridge structures. Many methods have been proposed for structural reliability assessment such as the First-order Second-Moment Method, the Advanced Second-Moment Method, Monte Carlo Simulation, etc. The Importance Sampling Technique can be employed to obtain accurate estimates for the system reliability with reasonable computation effort. Based on the results of example analysis, it may be concluded that Importance Sampling Technique is a very effective tool for the system reliability analysis.

• Earthquakes and Structures
• /
• v.12 no.3
• /
• pp.375-388
• /
• 2017

Prior to modern seismic provisions, several bridges were not designed for seismic actions in moderate seismic areas. Precast multi-girder and slab bridges are typical highway overpass structures; they have a significant contribution to national bridge stocks. Since the seismic behavior is questionable, a preliminary parametric study is conducted to determine critical configurations and components. The results indicate that the behavior of the abutments, backfill soil, superstructure and foundation is normally satisfactory; however, the superstructure-abutment joints are critical for both single- and multi-span bridges, while the piers are also critical for longer multi-span configurations. The parametric results provide a solid basis both for detailed seismic assessment and development of design concepts of newly built structures in moderate seismic zones.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2000

The paper describes system design of next-generation Ship Simulator using Virtual Reality (VRSS), well known as human-computer interaction. VRSS system is required to have special condition that comprises multiple user participants such as captain, officer, pilot, and quartermaster. To cope with that condition, core technologies were explored and proposed multi-networking system with broker server. The evaluation of the proposed system was done with PC-based immersion-type VR device, constituted with HMD (Head Mounted Display), Head Tracking Sensor, Puck, Headphone, and Microphone. Using the VR device, assessment test was carried out in a virtual bridge with 3D objects, which are created by VRML (Virtual Reality Model Language) program. As results of tests, it is shown that the cybernetic 3D objects were act as if real things in a real ship's bridge. Therefore, interesting interaction with participants can be obtained in the system, Thus, we found that the proposed system architecture can be applicable to VRSS system construction.

• Journal of the Korea Concrete Institute
• /
• v.11 no.5
• /
• pp.33-40
• /
• 1999

An improved finite element modeling technique is proposed for the assessment of load carrying capacity of partially prestressed concrete girder bridges. Based on the finite element method of analysis, shell and frame elements are used to model the slab and girders of the superstructure, respectively. In the modeling of superstructure, the emphasis is placed on the use of rigid link between the middle surface of slab an mid-plane of girder. This paper also includes the comparision of three different equations that are used in the calculation of effective moment of inertia for the partially prestressed concrete girders. Numerical analysis is performed for the unstrengthened and strengthened bridges. The obtained results are compared with those of load test for a prototype bridge. A good agreement is achieved between the numerical solutions by using the proposed method load test results.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.216-221
• /
• 2006

This study provides a methodology for development of the Seismic Damage Evaluation System (SDES) in Korea. Major systems and status of database related to road networks in Korea are investigated to analyze the usability of the required information for developing the SDES. In this study, the SDES is composed of four components that are the road network component, the ground motion component, the fragile structure component, and the cost component. In addition, the procedures for the construction of database which support the SDES is proposed, and a prototype of the SDES for expressway of Korea is developed based on the developed methodology. The National Geospatial Information System (NGIS) and the National Earthquake Information System (NEIS) are used to develop the road network component and ground motion component, respectively. For the fragile structure component and the cost component, Highway Bridge Management System (HEMS) was used.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.63-71
• /
• 2006

When surveying the cultural heritages especially in the case of stone structures, preserving their originalstate is of primary importance. For the effective assessment of survey results of stone structure, thedynamic characteristics of that system should be considered. Dynamic characteristics of stone masonry structures depend on several factors such as coefficients of friction, contact conditions, and number of layers of bonding stones. These factors can be estimated by using the dynamic analysis results. This paper describes a method for natural frequency determination of traditional stone arch bridge subjected to compressive force. For this purpose, multi-layered granite brick models of for arch bridge were made and fundamental frequencies corresponding increasing axial forces were measured.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.505-511
• /
• 2003

Experimental investigation was conducted into the flexure/shear-critical behavior of earthquake-damaged reinforced concrete columns with lap splicing of longitudinal reinforcement in the plastic hinge region. Six test specimens in the aspect ratio of 2,5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes of which magnitude could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under a constant axial load, P=$0.1f_{ck}A_g. Residual seismic performance of damaged columns was evaluated and compared to that of the corresponding original columns. Test results show that RC bridge piers with lap-spliced longitudinal steels in the plastic hinge region appeared to fail at low ductility. This was due to the debonding of the lap splice, which resulted from insufficient development of the longitudinal steels. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region indicated significant improvement both in flexural strength and displacement ductility, and strain energy ductility.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.119-122
• /
• 2000

The truss bridge is composed of numerous steel beams. In long span bridges the size of beams is getting larger, so the number of plate girders is increasing instead of rolled beams. This plate girder has long welding lines at the intersection of steel plates. The improper welding at the intersection line causes the steel bridge to be structurally unsafe. In this paper the loss of member section from improper welding was measured and the experimental testing was performed to get the S-N curve from testing models with sectional losses. The improper welding resulted in the lowering of structural safety and the shortening of life cycle.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.4 s.29
• /
• pp.43-50
• /
• 1996

Damage estimation of bridge structures has recently received considerable attention in the light of maintenance and retrofitting of existing structures under service loads and after natural disasters. A method for the damage assessment of bridge structures using a damage index technique is presented. The damage index is formulated for the changes of modal properties due to the change of the stiffness. In order to verify the method which is presented, numerical analysis is conducted on simple beam models. Each FE model is subjected to different damage scenarios, i.e., locations and degrees of damage. Results of numerical analysis indicate that the proposed method is capable of detecting inflicted damages using the eigenvalue of only first mode.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.4
• /
• pp.205-214
• /
• 1999

구조물의 동특성(고유진동수, 감쇠, 모드형상 등)의 변화는 구조물의 안전도를 평가할 수 있는 한 방법이다. 본 연구에서 콘크리트 세그먼트의 웨브 부분에 상당히 많은 균열이 진전되고 있는 상태의 Post-Tensioned Segmental 콘크리트 교량의 안전도 평가를 시도하였다. 안전도 평가를 위한 근간 데이터로 1986년 측정했던 데이터와 2차원 유한요소해석에서 얻은 결과값을 사용했다. 손상의 정도와 손상의 위치를 보다 정확히 찾아내기 위한 기술 중의 한 방법으로 Modal Test를 이용하였다. 이 방법이 Post-Tensioned Segmental 콘크리트 교량에 적용되어 교량의 안전도를 분석 평가하였다.